When the bathroom tiles have been paved, how to deal with water leakage?

Since there is a leak after the tiles are laid, it may be that the waterproofing is not done well, so the tile tiles are made out and waterproofed again.

This is generally to be redone, otherwise it will be unqualified.

If you want to deal with it, then you must pay attention to the safety measures to do so.

I think if the tiles are already laid and they are still leaking, I think they should be broken.

I think we should break the tiles and reassemble them.

If it leaks, take it apart and rebuild it. That's it.

I think if the tiles have been paved and are still leaking, it is recommended to ask the repairer to take a look.

You can use something special to suck the water out, or redecorate it a bit.

I think other professional masters should be able to check it out.

In life, when many decoration whites are decorating the bathroom, they generally only consider waterproofing in the bathroom, and at the same time, in order to save waterproofing. Will directly talk to the boss about the lowest **, but as an owner, you must know that if the waterproof master has the phenomenon of cutting corners. In the future, once the house leaks, it will still be your own trouble, so try to choose a higher ** when doing waterproofing.

Apply waterproof glue. For water leakage after the tile is paved, there is a special repair material, which is the waterproof glue on the surface of the tile. We want to be able to buy this waterproofing adhesive specially designed to repair tile crevices and tile surfaces.

The operation method is also very simple, that is, the waterproof glue is painted on the gap of the tile or the surface of the tile, and then the waterproof glue solidifies to form an effective waterproof coating film. In this way, the tiles of the bathroom are taken as a whole to achieve the most effective waterproofing effect.

If there is such a leakage problem, then all the tiles should be removed, and then the leakage problem of the water pipe should be treated, otherwise the same problem will occur in the later stage, or it is better to solve it as soon as possible.

It can be done to treat the seams, and the water in the general toilet is leaking through the cracks, and brushing waterproof glue can also solve this problem.

The bathroom will leak after the tiles are paved, which proves that there is no waterproof layer. Generally, the only way to leak water just after decoration is to remove the tiles, remove the waterproof layer to see the best inner wall, and then scrape the putty again, paint the wall and the ground with the waterproof layer, and then fill the water to do a three-day closed water test, if the water line is not reduced, it proves that the waterproof is done, and finally re-paved the tiles.

It may be that there is a problem with the waterproofing treatment and there is no waterproof paint that is well brushed, so this situation is caused by the need to identify the leakage and re-waterproof.

In the process of decorating the bathroom, waterproofing must be done well. In this way, it can be used without leakage, and in this case, it needs to be re-waterproofed.

First of all, we must know the cause of water leakage in the bathroom

1.Around the pipe, there was loosening, cracks, cracks.

2.Floor drains, loosening, cracks, cracks around the toilet in contact with the floor!

3.Gaps, cracks appear in the joints between the floor tiles and the floor tiles.

Bathroom and kitchen water leakage generally do not exceed the above three reasons, because the floor tiles themselves are never leaking. Once you understand the cause of the leak in the bathroom, you will know how to properly fix the leak.

Steps to fix a leak in the bathroom:

1.Clean the corners around the pipes, around the toilet, and the cracks in the floor tiles, remove the original adhesive, or clean up the dirt, without open water, and wipe them dry.

2.Redo the gap with clear spring waterproof sewing paste and dry it.

3.Spray the bathroom again with Qingquan anti-seepage refiller waterproofing agent to form an invisible, transparent permanent waterproof layer, which is scrub-resistant and has the same life as the substrate, as long as the substrate is there, it will be permanently effective.

How to deal with the leakage of the bathroom tiles: the treatment method of the bathroom tiles is the problem of the waterproof layer, the porcelain kettle car brick must be removed, the wall is beaten to the waterproof layer, and the inner wall is better, and then scrape the putty again, re-do the waterproof layer for the wall, and then pave the tiles, generally this method is more complicated. The second is that the rupture of the water pipe leads to water seepage, in this case, it is necessary to enter the water pipe when inspecting 1, the cause analysis of water seepage in the bathroom tile must first understand what causes the water seepage, there are several major reasons:

The waterproofing of the bathroom is not in place: secondly, the water pipe in the wall is damaged, resulting in water leakage, and in the rainy weather, due to the empty dampness, the surface of the tile surface is watered; In the end, it is not good that the tile gaps are not good, and there is water seepage. 2. Solution:

If there is a problem with the waterproof layer, the tiles must be removed, the wall must be beaten to the waterproof layer, and it is better to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles, which is generally more complicated. The second is that the water pipe rupture leads to water seepage, in this case, the water pipe needs to be tested to see if there is a water leakage, if it is indeed caused by the water pipe damage, to find out the leakage immediately, open the wall and replace the water pipe. If the wall seepage is only caused by the dampness, you only need to pay more attention to the ventilation and cleaning of the living room in your daily life.

If the tile gap is not good, there is water seepage. First of all, you need to use cement or caulk to fill the cracks, and then make a layer of waterproofing.

The causes and solutions of water seepage on the floor tiles of the bathroom are as follows:

1. The rupture of the water pipe leads to water seepage of the floor tiles.

If this is the case, from the appearance it should be that there is water on the floor tiles, and there will be water in the gaps of the floor tiles, when the water leakage is more serious, this situation will occur, if the water leakage is not serious, maybe there is a water leak in the gap. It is necessary to find out the specific leakage point of the water pipe leakage and replace it with a new water pipe.

2. The tile gap is too large and filial piety.

The gap between the floor tiles is too large, and the tiles are not wide and have caulk, if the family often uses the bathroom to take a bath, there is more water, if the slope of the bathroom itself is not done, it is also possible to store water between the gaps of the bathroom tiles, and it is necessary to add caulk or caulk between the floor tiles, if the conditions allow, try to put on the caulk, the caulk is waterproof and beautiful than the caulk.

3. The waterproof layer is damaged.

There are some waterproofing to do poorly, a long time waterproof layer leakage, in this case there will be water seepage between the gaps in the floor tiles, the need for the waterproof layer of the problem, if it is a quick and simple solution, is for the seepage point to remove the bright floor tiles to do waterproofing, if you want not to break the floor tiles, you can directly use the kind of waterproof bricks to brush a few more times.

Precautions for waterproofing in the bathroom

1. Do the leveling layer.

Bathroom waterproofing must be done leveling layer, first use cement mortar to level the ground and then do waterproof treatment, so as to avoid leakage caused by uneven thickness of waterproof coating.

2. Do a good job in key parts.

When the bathroom is waterproofed, the key parts must be done, such as the joints between the wall and the ground, as well as the joints between the water and sewage pipes and the ground, etc., which are more likely to cause problems. Therefore, these parts must be paid special attention to during construction, and the treatment must be meticulous.

3. The wall should also be waterproof.

If you want the bathroom to achieve a better waterproof effect, then the wall should also be about 30cm high waterproofing, so as to avoid the occurrence of water leaking through the wall.

First of all, it is necessary to analyze the cause of the water leakage and find the leakage point. After determining the leakage point, directly destroy the surface of the tile, repair the leakage point, and then re-lay the floor tiles.

The tiles in the bathroom have been pasted, but if there is a leak, then this is to be reworked, and it is necessary to rework it while it has not been put into use.

I think that if the tiles in the bathroom have been pasted, but if we find a leak, we should take remedial measures in time, and we can re-use cement to brush the leakage again.