There are many scratches on the coffee table after a long time, how to avoid such problems?

1.Apply toothpaste

1) In the process of use, if you are not careful, you will leave a small scratch on the glass coffee table, don't worry, you can use toothpaste to cover up the small scratches, if the scratches are very deep and obvious, the effect may not be satisfactory.

2) Put the toothpaste on the polishing cloth, use the white toothpaste to achieve better results, and then gently apply the toothpaste on the scratches, which can be determined according to the scratches, and apply more times if necessary.

3) When it is done, wipe the toothpaste clean with a clean, damp cloth and check again to see if the scratches are becoming less noticeable.

2.Anoint ammonia

2) On the scratch, wipe it in a spiral shape, the force is a little smaller, wait until the ammonia is wiped clean, see if the scratch has become smaller, if it is not too obvious or not satisfied, you can wipe it several times according to your own needs.

1.Buy some special products for treating glass scratches

1) These products can be bought in furniture stores or hardware stores, you need to tell the owner in advance, how to get the scratches, how thick the glass is, the material of glass, for example, ground glass, ordinary glass or stained glass, and then ask him if there are suitable tools.

2) Follow the instructions on the tool box, take out the sand table inside and install it on the drill bit, adjust the speed of the drill bit to the lowest gear, and then start grinding the glass, use the drill bit equipped with the sand table to smooth out the scratches, it's OK, you need a little more patience and more time in the grinding process.

2.Apply ferric oxide with a wool polishing pad

1) In addition to the above method, you can use a wool polishing pad to rub a little ferric oxide, and then apply it on the glass in a spiral shape to all sides, rubbing it several times until the scratches fade.

2) You can also choose a clean sponge dipped in ammonia aqueous solution, that is, a mixed solution of 60 ml of ammonia and liter water, don't make a mistake about the ratio! Wipe the ferric oxide off the glass. Remove scratches from the glass cooktop.

You can put a thick layer of mats on the coffee table to avoid it.

When you buy it, you want to buy some sturdy coffee tables, so that there will be no scratches.

You can choose to put a piece of fabric on it or something, and you can pay more attention to it when you usually use it.

Then put a protective film on the coffee table, I think you can buy it back first, and buy a suitable film to protect it when the coffee table is back.

I think I can buy a suitable film to protect the coffee table when I buy it first.

The way to do this is to get a film to protect her, or a mat.

When you can't fix it, you should cover it, and you can buy some good table mats.

Therefore, we must be careful not to scratch it with things.

Then put a protective film on the coffee table, which can protect the coffee table well.

There will always be tea stains left on the coffee table, and it will leave pieces of stains after a long time, how to clean it up at this time?

Dear, hello, I am happy to answer for you that there will always be tea stains on the coffee table, and those who have been with it for a long time will leave a piece of stains, so it should be cleaned up like this. 1. If the time is not long, wipe it with a scouring pad dipped in salad oil, and you can wipe it off. It takes a few minutes to moisturize, don't push too hard, the whole process takes about ten minutes; 2. Disinfectant powder (TD powder), mix with some water, soak it and then wipe it with a scouring pad; 3. If it is a table brushed with varnish oil, as long as you gently wipe it with ordinary iodine wine, and then wipe it vigorously with a rag every two days, the traces will disappear.

4. Wipe with medium oil, alcohol, and toilet water. 5. Make a cup of strong tea, dip it in a soft cloth and wipe it. 6. Apply a layer of petroleum jelly to the scalded area, and gently wipe it with a cloth every two days to make it as new.

7. If the time is not more than half a year, dip cotton in cooking oil, rub it on the traces, (leave a small amount) and soak for 6 hours, and the traces will disappear. 8. How to cup seal for a long time, the above methods are ineffective or have little effect, it is recommended to re-spray Chang Mimu paint.

1. First of all, we can use some repair wax, which can be filled.

2. The second method, if the solid wood furniture is painted, you can put a layer of transparent nail polish on it, which can also be used as a protective effect. Finally, we also need to take good care of it when we use it in our daily life, you can put a tablecloth or table runner on it, which is not only beautiful, but also very practical.

Although the marble coffee table is not prone to scratches, what if there are scratches? Next, let's introduce pchouse.

1. Polishing according to the depth of the scratches.

First of all, it depends on the depth of the scratch, if the scratch is relatively shallow, you can use 2000 and 3000 grinding pads to polish, if the scratch is too obvious, then you can only take other methods.

2. Fine scratches can be polished.

For fine scratches on marble, you can also polish with the help of marble polishing powder, and if it is a stone with glass composition, you can use glass polishing powder for polishing. Polishing powder can visibly reduce scratches while also increasing the gloss of the surface.

3. Waxing and polishing.

The stone surface of marble needs to be waxed regularly, waxing can not only prevent the surface from being polluted and penetrated by dust, but also remove scratches on the surface and make the surface more shiny. When waxing, it is necessary to use a professional waxing machine and high-grade stone care wax to achieve a smooth and bright effect.

When using a glass coffee table, you may accidentally get scratches, so how can you fix them? Next, let's introduce pchouse.

1. Toothpaste. Suitable for shallow, smaller scratches. Rub the toothpaste back and forth with a damp cloth until the scratches are not noticeable, and then wipe off the toothpaste with a dry cloth.

2. Sandpaper.

Suitable for shallow, small scratches. It is best to start grinding with a more delicate sandpaper, and if the effect is not good, then use a rougher sandpaper.

3. Polishing paste.

Take a piece of polishing cloth or fine silk, wet it with water, and wring it out until it won't drip. Use a damp cloth dipped in polishing paste and sand the scratches in a circular motion, taking care not to use too much force, otherwise the overall smoothness will be affected.

4. Wool wheel.

Add water to the polishing powder to make a paste, then apply the paste to the grinding marks, and then polish it with a wool wheel.

5. Polishing machine.

Suitable for deeper, larger scratches. When buying a polishing machine, it is best to tell the clerk the specific situation of the scratch, including the thickness of the glass, whether it is ground glass, ordinary glass or stained glass, etc., to choose the most suitable tool.

Only re-sanding and then re-painting is done.

The peeling of the painted coffee table is also called blistering, common causes and remedies: 1. Problem phenomenon: After the paint film dries, there are protruding round bubbles of different sizes, also called bubbling. Blistering occurs between the surface to be coated and the paint film, or between two layers of paint film.

2. Cause of the problem:

1) The substrate treatment is not up to standard, such as the high moisture content of the wood, or the pine resin and the aromatic oil contained in the wood itself are not removed, which will lead to blistering when it volatilizes naturally.

2) Apply the finishing layer when the oil-based or water-based putty is not completely dry or the base coating is not dry.

3) The joints and holes of the wood are not filled, and there are voids and holes.

4) The paint viscosity is too high.

5) The paint ratio is inappropriate.

6) Drag the brush back and forth while brushing, and the air bubbles generated are not eliminated.

7) The surface of the substrate is attached to oil, dust, blisters, etc., and these impurities are stained with water.

8) There is water in the compressor and air pipe, or there is water splashed on the construction surface.

9) Most of them are the same as pinhole causes.

3. Remedy:

1) The wood should be dried to a suitable moisture content, and the aromatic oil or pine resin in the wood should be removed.

2) The putty and base coating should be fully dried, and then the top coat should be brushed.

3) The voids and wood holes at the joints of the wood should be filled with putty, and then painted after being sanded and smoothed.

4) It is best to clean the debris on the surface of the substrate with a clean rag, do not touch it with your hands, and the painted surface after cleaning can be painted.

5) The construction viscosity of the paint should be appropriate.

6) Do not drag back and forth when brushing, first horizontally, then vertically, and finally straighten along the direction of the wood grain.

7) Regularly discharge the water in the compressor and install an oil-water separator.

8) Refer to the countermeasures of pinholes.

9) For slight bubbles, you can wait for the paint film to dry thoroughly, polish it with sandpaper, and then repair the topcoat. For serious bubbles, first pick up the bubbles, carefully polish and clean them with sandpaper, and then repair them layer by layer according to the coating process.

Spray varnish after the transparent putty is leveled.