How to format N72 phones, how to format N72 phones

Point multi** operation, formatting.

I've also encountered this problem, first connect the phone to the computer, and then right-click on the removable disk and select Format.

Grid machine is generally in the mobile phone junk files too much, serious errors can not be recovered or the phone is abnormal, the grid machine will clear all the contents of the C: disk, and then write new system information, so please back up the data and information you need before the machine. There are three types of lattice machines:

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formatting...... appears" (may not be) before releasing the key. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time;

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damage to the hardware of the machine, not to be foolish, do not use the hard grid when the machine can not be turned on, and one thing to note is that the line 2 will disappear after the grid, and it must be restored to the kf flash.

But you have to back up your stuff before.

Standby interface input* and then enter the secret code.

Turn off the hard grid first, and then press and hold the dial key, "* key, and "3" key when turning on the machine, and turn on the power until the word "nokia" appears (you can't release any of the keys during this process). Wait a few seconds until "formatting...... appearswords, then you can release the above buttons. After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen.

Line 2 will be lost

Attention needs to be paid to the grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc.

Phone formatting:

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, 3 5 minutes after the system formatting is completed, the phone will automatically restart and enter the standby screen, re-enter the phone time;

Memory card formatting:

1.On the computer, the system file must be selected fat

2.Then on the phone, you don't need to set anything, format it directly, and generally format it on the phone after formatting it on the computer, and generate a system folder.

3 dials, and the power is turned on at the same time. Press and hold for one minute until the screen is out.

There are two types: hard and soft. It's all about formatting the phone's memory.

Soft: Lose in standby: *

Hard grid: Press and hold the "*" 3 and "** keys" (that is, the silver bar key) and then press the power button).

The hard grid is in the shutdown state.

Pay attention to ensure that the phone is fully charged.

Personally, I recommend it hard and feel more thorough.

Three ways to lattice machines.

The mobile phone is generally carried out in the case of too many junk files in the mobile phone, serious errors can not be recovered or the mobile phone is abnormal, the grid machine will empty all the contents of the C: disk, and then write new system information, so please back up the data and information you need before the grid. The Nokia S60 intelligent system has three grid methods:

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password of the general Nokia mobile phone is: 12345, if you have changed the mobile phone password, then you should enter your changed password (note, here is not the SIM card password but the mobile phone password).

After entering the password, a white screen will appear, only the word nokia will be displayed, and the grid machine can be completed after 3 or 5 minutes, and the mobile phone time needs to be re-entered after the grid is completed.

2. Hard grid: turn off the computer first, press and hold the "dial key, "* key and "3" key while rebooting until the word "nokia" appears on the screen, this process can not release any button, wait for a few seconds until "formating...... appears", then you can release the key. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and then re-enter the phone time.

3. Gridding through software: You can install "system".

tools", which has the option of "formatting", you can grid the machine without entering the lock code.

This software is in the file vault on the 3rd floor.

There are a few points to note about the above grid machine:

1. Be sure to keep the phone absolutely sufficient, so it is best to fully charge it before the grid;

2. Do not try to shut down the machine during the process;

3. The charger can not be plugged in during the process, and if it is violated, it may cause serious consequences such as burn-in.

In addition, the hard grid may damage the hardware of the machine, so if it is not absolutely necessary, do not use the hard grid when the machine cannot be turned on and used.