How do you format a Nokia N72?

Press * format phone in standby mode, it will prompt you to enter a password, the default is 12345, remember to be sure that the battery is sufficient, otherwise the phone will become bricked, don't come to me, and you can't even connect the charger to do it!

It's easy to check the card, first go to the settings, enter the memory card, press the option, there is a formatted memory card inside.

Of course, you can also use a card reader to check the card on the computer, and then put it back on the phone, and the folder will be automatically created on the card.

If you want a soft box, type :

Hard words: First: take out the memory card and press and hold 3 at the same time, dial, turn on, four keys and other screens to display the word nokia, and then let go at the same time The grid is successful, and the phone will be restored to factory settings Note:

Be sure to press and hold all four keys at the same time, and if unsuccessful, try a few more times, and press exactly the same time as the recommended soft grid.

Hard-gridded. Hard mode: Remove the memory card.

In the standby state or shutdown state, press the 3 button plus the * key plus the green dial key and then add the power button, then a white screen will appear, a black screen will appear after a minute or two, and then the hand-holding screen will appear, and then the selection of the region will appear, then you can let go, and the hard grid will restore the phone to its original state.

Menu Set Data Management memory card, go inside and press the option to format the memory card.

If you get a virus, kill it on your computer, no need to format it! Or the next antivirus.

Glad to answer for you, satisfied, thank you.

Format phone.

If you want to get a card, go to the tool first, enter the memory card, press the option, and there is a formatted memory card inside.

Formatting your phone is the most convenient way.

standby case. Input. Password.

Comparison of several lattice machine methods and results:

1.Enter * on standby – soft bar. Only restore the system to factory settings, do not delete files.

2.Standby input* – soft and hard. Restoring the system to factory settings will delete the personal data of the C drive. However, Line 2 cannot be retained, and it will return to its original state. Sometimes, the C drive file is not deleted with the grid after the machine.

3.3+1 key hard grid - hard grid. Restoring the system to factory settings will delete the personal data of the C drive. Route 2 can be reserved. It's the same as flashing. Recommended.

Hard Grid Operation Method:

Two hands are required to cooperate, and you need to press and hold the green call button three keys with one hand at the same time, and press and hold the power button with the other hand. You can't let go of the handshake until the screen formatting....to be loose. After about two minutes, the phone will be automatically turned on, and N70, N72 and other phones will not appear formatting....words, you can only let go when you see the setting time).

Precautions before the lattice machine:

1.Make a backup of your personal data.

Of course, the main thing is to back up the more important business card holders and text messages. Others, such as some C disk game saves, **, video recordings, audio recordings, etc., can also be backed up by yourself (if these things are saved on the MMC card, then there is no need to back up).

2.The battery has more power.

There is no need to explain too much about this, if the grid is out of power in the middle of the grid, the consequences may need to be returned to the factory.

3.It is best to pull out the memory card card.

Finally, a reminder to everyone: don't think about backing up when you're about to check your phone! It should be a good habit to make a good habit if you pass the business card holder, it is best to make a backup right away to optimize the data and make a backup.

Similarly, important retained information can also be backed up. Also, you should keep a copy of all your backups on your computer, just in case.

What you said"3+1" is too difficult to operate,Use this method to also hard-grid n97mini,The hard-grid method is as follows:After turning off the phone, press and hold shift (lower left corner) + delete key (upper right corner key) + space, don't let go and press the power button again at the same time to turn on the computer, until the region option appears, then it means that your phone hard grid is completed, only the system files are left, and the rest of the files are cleared.

Grid machine is generally in the mobile phone junk files too much, serious errors can not be recovered or the phone is abnormal, the grid machine will clear all the contents of the C: disk, and then write new system information, so please back up the data and information you need before the machine. There are three types of lattice machines:

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formatting...... appears" (may not be) before releasing the key. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time;

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damage to the hardware of the machine, not to be foolish, do not use the hard grid when the machine can not be turned on, and one thing to note is that the line 2 will disappear after the grid, and it must be restored to the kf flash.

But you have to back up your stuff before.

Standby interface input* and then enter the secret code.

There are two ways to do it:

1. Soft grid: After entering * on the mobile phone, you are asked to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password.

That is the changed password (not the SIM card password), after which a white screen appears, only the word nokia is displayed, 2 3 minutes later the grid is completed, re-enter the time.

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key when turning on, and pay attention to the above grid machine: keep the power absolutely sufficient, (remember to back up the data you want before the grid) There is also a factory reset, the initial password is: 12345! Just leave the memory stuck on the formatted side.

* OK backup business card and your N97 doesn't have a memory card? It's best to format the card as well, but your navigation formatting may not work Note

The whole 360 Guardian on your phone! Just delete the mess and you're done!

1. Soft grid: Enter on your mobile phone.

After asking you to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), after which a white screen appears, only the word nokia is displayed, 2 3 minutes after the grid is completed, re-enter the time.

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, and "3" key when turning on the computer, and turn on the power until the word "nokia" appears (no button can be released during this process).

Wait a few seconds until "formatting...... appearswords, then you can release the above buttons. After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen.

The above grid machine needs to pay attention: keep the power absolutely sufficient, do not try to shut down the grid on the way, can not plug in the charger, etc. Generally, soft grid is preferred. (Remember to back up the data you want before the machine).