Bluetooth headsets and mobile phones can t be matched, why can t some Bluetooth headsets be paired?

When the earbuds have just been bought and have not been connected to other devices, they will generally automatically enter the pairing state when they are turned on. If you need to connect with a device other than the device you just successfully connected, you need to manually make it enter the pairing state.

Different headphones have different ways to enter. If your headphones only have one button, then after powering off, press and hold the function key until the indicator light is always on, which is the pairing state. If there are multiple keys with separate function keys and power buttons, then after powering on, press and hold the function keys until the light is always on.

Of course, some headphones don't use always-on to indicate the pairing status, so you should pay attention to it yourself. And the above operation method is only a more common way, and it cannot represent everything.

After the earphones enter the pairing state, the mobile phone turns on Bluetooth, searches for the earphones, pairs, connects, if you need a password, it is generally 0000, and there may be no password, but this kind of mobile phone and earphone Bluetooth protocol are both versions or above.

The connection method of Bluetooth headset is generally as follows:

Press the power button for more than 5 seconds in the state of power off until the red and blue lights flash alternately, then enter the pairing state, then turn on the Bluetooth of the mobile phone, search for the Bluetooth device, find the corresponding device name, and pair and connect.

You give it a try. Hope mine can help you.

1. It is possible that the Bluetooth headset does not have the pairing function turned on. Solution: Tap the button on the Bluetooth headset sock twice in a row to turn on the pairing function.

2. It may be that the mobile phone has not turned on open detection. Solution: Turn on the open detection of Bluetooth on your phone.

3. Restart the phone, it may be that the CPU occupation of the phone is too high and the connection cannot be made.

4. If there is a problem with the hard Huai gas equipment, whether it is a Bluetooth headset or a failure of the Bluetooth function of the mobile phone, it will lead to the phenomenon that the Bluetooth connection cannot be reached.

5. If the above methods cannot solve the problem, it may be that the mobile phone is not compatible, and you can only go to the merchant for replacement.

Other cases:

After the pairing is successful, the pairing will be canceled, and the next reconnection will not be able to connect.

The reason is that after unpairing, the Bluetooth device name will appear on the phone's searchable bar, but it is just a cache record, and it will be gone after refreshing, if you click on the pairing can not be connected, or even turn off the mobile phone Bluetooth can not be connected to the device when it is turned on.

Then we restart the Bluetooth receiver, and then restart the mobile phone Bluetooth to pair it, the default device name will appear in the available devices after unpairing, but it will not match, double click the green Bluetooth receiver function key to complete the restart, turn off the Bluetooth on the mobile phone can be paired and connected after the lead is turned on.

Summary. <>

Hello, dear, I'm glad to have your question, what's going on with the Bluetooth headset not matching the phone, help you find out, the Bluetooth can't connect to the phone may be that the Bluetooth headset has not entered the pairing mode; The Bluetooth headset has been connected to other mobile phones and has saved the pairing record, so it cannot be connected; Or the Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the headset; There are other situations, or the Bluetooth function of the mobile phone or headset is damaged, and it cannot transmit and receive Bluetooth signals normally, then it needs to be repaired. Hope mine can help you. I wish you good health and a happy mood

What's going on with the Bluetooth headset not matching the phone.

Hello, dear, I'm glad to have your question, what's going on with the Bluetooth headset not matching the phone, help you find out, the blue finch letter tooth can't connect to the mobile phone may be the Bluetooth earband limb machine has not entered the pairing mode; The Bluetooth headset has been connected to other mobile phones and has saved the pairing record, so it cannot be connected; Or the Bluetooth of the mobile phone is not compatible with the Bluetooth version of the headset; There are other situations, or the Bluetooth function of the mobile phone or headset is damaged, and it cannot transmit and receive Bluetooth signals normally, then it needs to be repaired. Hope mine can help you. I wish you good health and a happy mood

If the Bluetooth headset cannot be paired with the mobile phone, it is recommended to try according to the following operation methods: 1. Check whether the earphone has been paired with other mobile phones around Yushi connection. 2. It is recommended that you put the dual earbuds into the charging case, open the lid of the case, and press and hold the function button to complete the factory reset.

3. Make sure that the left and right earbuds are placed in the charging case, press and hold the pairing button of the charging case for 3s to confirm whether you can enter the pairing mode (white light flashing), put the earbuds close to the phone, and keep the earbuds in pairing state (refer to the instructions for use of specific products). 4. Turn off the Bluetooth on the phone, search for the Bluetooth headset again and click to pair. 5. Temporarily turn off the wifi on the mobile phone, search for the Qingmusan Bluetooth headset again, click to pair and then turn on the wifi to use.

Summary. 1. The Bluetooth headset has not entered pairing mode;

Solution: There will be a function button on the Bluetooth headset, this multi-functional button has a function is to match the device and the Bluetooth headset, when connecting with the mobile phone, you need to press and hold this function key, and at the same time you need to open the Bluetooth function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect.

Bluetooth headsets don't match other mobile phones.

1. The Bluetooth headset does not enter the pairing mode; Solution: There will be a function button in the Bluetooth headset guess hand, this multi-functional button has a function is to match the device and the Bluetooth headset, when connecting with the mobile phone, you need to press and hold the function key, and at the same time you need to open the Bluetooth limb function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect.

Second, the Bluetooth headset has been connected to other mobile phones, and the pairing record has been saved, so it cannot be connected; Solution: In this case, you need to forget the saved settings of the previous key song and pair it again. Due to the different settings of different Bluetooth headsets, it is necessary to refer to the relevant product manual for specific operations.

Mine is Apple's bluetooth headphones.

3. The Bluetooth version of the mobile phone and the Bluetooth version of the headset are not compatible. This is a hardware problem, and consumers themselves cannot solve it by themselves, so it is recommended to find a headphone rental seller for return and exchange. Before making a purchase, it is best to refer to the product description and see the Bluetooth technology supported by the phone and Bluetooth headset, or the list of compatible ones.

I use a U-school computer.

There is a high probability that Bluetooth and U-school computers are incompatible.

Try long pressing the re-pairing button on the Apple earbuds.

Then let the U-school computer reconnect.

If not, this is most likely due to the hardware mismatch.

This should just not be connected.

At first, the white one kept flashing, and then the green one lit up and then disappeared.

Is it after pressing rematch.

Connected before.

The headset and the phone connection are not without any problems.

Right. That shouldn't be a hardware issue.

You just make the headphones light up white.

Indicates that the earbuds are re-paired.

Then turn off your phone's Bluetooth.

Make sure that there is only one Bluetooth on around Youxue.

The phone is not around.

Try again and it should be fine.

Then reboot the U-school computer.

The Bluetooth button of the U-school school is switched on and off again.

The headphones are re-paired.

Try it.

It should be okay.

Hope you can get your hands on it and give me a thumbs up.