The master who works as an electrician in the factory is invited to come in, and what is the general

Rotate often to see whether the motor protection setting is appropriate and whether the control line is loose. Touch the motor to see whether the temperature is high, whether the vibration is large, whether there is abnormal sound, whether the accessories are complete, and whether the feet are loose. Check whether the motor current exceeds the rating.

See if the electrical cabinet has any smell and abnormal noise. The work in the electrical station is the safe operation of electrical equipment, and the operation rate of electrical equipment and standby is improved; Eliminate the occurrence of unsafe accidents of equipment and personnel. Of course, always clean the ashes and refuel frequently.

Ask more, operator.

The distribution room, of course, is, the current voltage. Contact temperature, protection setting, operation specifications, and the establishment of a strict system. Hygiene must be done first. According to the power maintenance standards, minor repairs and major repairs have been carried out. The power distribution room of the factory is not so strict, but it is mainly protected and operated.

Electricians are to be diligent in learning, asking diligently, and observing diligently. Look, smell, ask, learn.

Generally, it is necessary to wait for the repair to go to the maintenance, if the work is responsible, observe the amount of electricity every hour in the early stage, grasp the law of electricity consumption, and the peak period of electricity consumption is very beneficial to the future work.

Usually check all electrical appliances from time to time, whether the screws of the power supply system are loose, it will naturally be loose after a long time, and it can be tightened a quarter of a turn to prove that it is loose. You can also touch the line of the inlet and outlet by hand (of course, it refers to the insulating layer) to see if it has the phenomenon of heating, so that some hidden dangers can be solved in advance.

If the motor fails, one is that the sound changes, and the other is that it will heat up and burn your hands, and a good motor shell is a temperature control paint, and the temperature will turn yellow if the temperature is too high"Yellow Card Warning"And so it comes.

Look at whether the wire is connected virtually, whether it is burned out, whether there is any peculiar smell, whether there is any abnormal sound, whether the voltage is normal, and whether there is overload.

Related to production equipment (production lines).

Job 1: If the production line breaks down and stops production, it will be repaired as quickly as possible by you or by an electrician.

Job 2: If any device is always awkward and does not function properly, it will let you transform it.

Job 3: If there is imported equipment, it may be necessary for you to study it, and then carry out the localization of parts. After all, it is much more expensive to buy imported accessories.

Job 4: If there is a newly purchased equipment, it is necessary to do the work or teasing of the equipment that is installed and debugged by the Anyuan Group. If you happen to be importing equipment, you will have to work with a foreigner and complete the training of the operator and maintenance worker (as well as interpreter and prepare spoken foreign language).

1.Factory electricians are generally divided into maintenance electricians, assembly electricians, and equipment electricians.

2.The maintenance electrician is to maintain and repair the assembly line of the factory.

3.The assembly electrician is to carry out the wiring and install the circuit part of the newly buried reed assembly line.

4.The equipment electrician hunger group is to maintain and repair the third-party equipment purchased by the factory.

To be an electrician in a factory, you must understand some simple relay contactor control circuits, which is what electricians often call power drag and control. If you don't understand this, you can only be a bulb electrician when you enter the factory