win10 how to set broadband disconnect automatically

Win10 automatically connects to broadband methods.

Get a router, enter the account password on the router side, and the router will automatically log in.

Win10 automatically connects to broadband methods.

Method 1, 1, click the "Settings" button at the start button of the win10 system;

2. Click the Device Manager button;

3. Select the network adapter button;

4. Right-click to select the network card you want to operate, click Disable, and click Right-click to restart after disable;

Method 2: 1. Right-click on the network connection in the lower right corner and select "Open Network and Sharing Center".

2. Click Change Network Adapter Settings;

3. Select the local connection (wired or wireless) of the network in question, and right-click to select Repair.

The above is the detailed solution to the win10 system that automatically disconnects the network connection, users who encounter such problems can refer to the above methods to operate, I hope it can help you solve this problem.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

It should be that the system is too new after the upgrade, and the driver can't follow up in time.

I'm in the same situation as you before.,Touched for a few days.,Find this.,I hope it can help you a little bit of my computer--Properties--Device Manager--Find your network card--Properties--Power management on the far right--Uncheck the one that allows to turn off.,If there are two network cards, do the same once.。。

I solved the problem like this.,But I have a colleague who still hasn't solved it after using my method.,It's still disconnected.,I don't know why.,I hope someone can answer.。。。

By the way, I forgot a point, if it is a wireless connection, you have to go into the router to set it, and the network parameters - connection mode - automatic disconnection time is set to 0.

(1) Solution: Open My Computer --Properties.

2) Open Device Manager – find your network card.

3) Find Properties -- Power Management on the far right -- and uncheck the one that allows it to be turned off.

2) Windows 10 is a new generation of cross-platform and device application operating system developed by Microsoft in the United States.

3) Windows 10 is the last standalone Windows version released by Microsoft, and the next generation of Windows will come as an update. Windows 10 comes in seven distributions, each targeting different users and devices.

The steps are as follows:

1. First of all, right-click on the "This Computer" on the win10 desktop, and click "Manage" in the pop-up right-click menu, as shown in the figure below.

2. After opening the computer management interface, click [Task Scheduler] in the left menu to select the item, then right-click, and select [Create Basic Task] in the pop-up options, as shown below.

4. The next step is the task trigger setting, that is, to choose when to start the task. If win10 cancels the boot password, you can choose "when the computer starts"; If the win10 computer has a boot password, you can also select "When the user logs in", and when you are done, continue to click "Next", as shown below.

After the next step, it is the "Operation" setting option, and the default selection is "Start", so click "Next" directly below, as shown below.

5. The following step is the "Startup Program" setting, and it is also the most important one, enter the task script under the following "Programs and Scripts", and if you don't know how to enter it, you can also click on the back of the browse, and then find the "broadband connection shortcut" on the table surface, as shown in the figure below.

After that, the task scheduler reminder will pop up, click "Yes" directly here, as shown below.

6. In the last "Finish" step operation, remember to check the "When you click Finish, open the dialog box of this task property" at the bottom of the "When you click Finish", click "Finish" at the bottom, as shown in the figure

Finally, in the Win10 self-bandwidth band connection attributes, check "Run regardless of whether the user logs in or not", select "Win10" in the configuration at the bottom, and then click "OK" at the bottom to complete the setting, as shown in the figure below.

Finally, you need to enter the login password once to complete the setup.