I want to use knuckle board for furniture, what knuckle board is better for wardrobe doors? Does var

Panel, you see what color you want to do, do white without a panel, if you want to choose a panel, I suggest you choose red, your lacquer cloth to use a brush of the brush is outdated, to use a spray, primer spray 2 pieces, and then repair the color, (the color repair will make your panel look better), and then on 3 pieces of topcoat, guaranteed to be very good, if you want the highest level of feel and appearance, then you are playing water grinding, water grinding and waxing will look better than the furniture you buy, however, the quality of waxed furniture will decline, the paint is almost the same, Dabao, Hengyuan Sen, Baihua Oulong The primer is about 150 and the topcoat is about 250, according to my practice, the feel and vision will be very good, and it will not be worse than the finished furniture you buy.

There are regional differences. However, there should be branded plates in the plate market.

In Hangzhou, 15mm fir boards are 145 yuan each, and the back panel of the wardrobe is best made of camphor boards.

Wardrobe doors, it is recommended that you buy finished titanium alloy sliding doors, in addition to being beautiful, practical and environmentally friendly, relatively speaking.

The chance of deformation is very small.

Wardrobe door veneer, brush varnish, if it is a dark lacquer color, after brushing, you will find that the cabinet door is uneven, the visual effect is very poor. Of course, the lighter the color, the less bumpy it feels.

What brand of paint to choose, this question is too general, Nippon, Dulux, Three Trees, China Resources, Shengpai, there are too many masters, choose according to your own economic situation.

15mm fir knuckle board 90 yuan, 10mm knuckle board to do back plate 62 yuan, so bad, I advise you not to do, do varnish 38-50 yuan square meters, do colored paint 75-95 yuan square meters, inside and outside a total of how many square meters, than you buy one more expensive. Think about it and don't regret it.

Hello, how to remove the smell of your rubberwood, the water-based paint of my rubberwood brush, ventilation for two months, the sour smell is very great, please advise, thank you.

Several aspects of the problem, the authenticity of the rubber wood itself, the problem of paint, etc., in winter due to the low temperature, formaldehyde and other release less, you may not feel it, now the temperature is high, the release of fast concentration and high concentration is obvious, it is not recommended to paint again, the activated carbon in the cabinet is definitely effective, it may be that the amount of put is not enough or the activated carbon bought is not suitable, when no one opens the ventilation can be conducive to the release of formaldehyde.

Yijun's heart is like the water of the West River, flowing east day and night.

Rubber wood itself is sour and smelly, and it is not harmful to the body. Don't paint the cabinet again, it will kill people.

Flying-wooded boards, varnish.

What board is chosen by the individual, at present, in the decoration of furniture, the more used is the Feilin board and the large core board veneer, Feilin board is now used in many board furniture. If you use a large core board, you need to paste the veneer, and there are many options for the veneer, such as ash, red sandalwood.

What paint to brush is to be determined according to the decoration style of the home, if it is varnish, it will be the true color of the panel, and the color paint, that is, will cover the original is the true color of the panel, depending on your personal preference.

The Chenyang water paint 2kpu water-based wood paint just brushed on my table is very good, anti-scald and high temperature resistant, the painting area is large, and it dries quickly after brushing, and there is no harm to the human body at all. It is suitable for all kinds of wooden furniture, and it is also resistant to yellowing, so you don't have to worry about scratches caused by foreign objects. In recent years, it has also been reported by CCTV many times that it is a green and environmentally friendly enterprise, and the big brand is trustworthy.

Hello, I'm glad to answer for you I'm talking about emotions in clothes, and my questions are answered by me. I'm typing for you to solve the problem, it will take about 5 minutes, don't worry, please wait a while.

Hello question. Is it better to paint the wardrobe or not to paint.

At present, in terms of decoration to make furniture, the more used is the Feilin board and the large core board veneer, and the Feilin board is now used in many board furniture.

Both varnish and mixed paint are available, and the mixed paint is durable and good-looking.

Mixed paint is the cost of adding paint and labor to the bottom layer of wood, ** to see the local material and labor costs.

Question: If you want to buy a wardrobe, you don't need to make paint, if you want to play the wardrobe, do you buy a painted board, or buy a board that makes a good cabinet and then paint, which of the two is more upscale.

1. Due to the paint-free board wardrobe, its bearing capacity is relatively poor, so after putting too many clothes in the wardrobe, we will find that the wardrobe is deformed! If this deformation is more serious, then the wardrobe is also very likely to collapse when it is used.

2. In addition, the moisture-proof performance of the paint-free board wardrobe is not good, once the water accidentally splashes into the wardrobe, or the home is too humid, then the wardrobe is easy to be damp and mildew, so the clothes in the wardrobe will naturally be affected to a certain extent.

3. The cost of painting the wardrobe is higher than that of the paint-free board wardrobe, but the cost performance of this wardrobe will be higher, and it will be more convenient to use at the same time, without so many problems and hidden dangers, so if your economic strength allows, it is best to paint the wardrobe yourself.

First, the cabinets that generally choose MDF or MDF and particleboard are mostly used by low-end furniture manufacturers. There are also some top-level environmental MDF applications in high-end production lines. This kind of material is generally made of office furniture, and the surface is less complicated to paint and other complex processes.

Mainly melamine ecological and environmental protection surface, reduce the release of formaldehyde, save the cost of paint, so that the cost of the overall product will come down.

Generally, to make cabinets, it is more important to choose woodworking boards, or to choose multi-layer boards with the same environmental protection level. The advantage of these two types of plates is that their stability is relatively high, and they are not afraid of mildew, moisture absorption, etc. This year, the more popular thing in the market is to choose ecological board, this product says that the surface process is melamine surface, and the core material inside can be woodworking board or multi-layer board.

Comparatively speaking, woodworking boards are much lighter, and multi-layer boards are much thicker. More people choose woodworking boards and ecological boards because of their budget. Although the cabinets made of this kind of plate are convenient and easy to form, it also leads to his meticulous craftsmanship not being reflected so much.

Second, regarding the color and texture of the finish, this year's most used colors are Zong walnut, white cherry, red walnut, red oak, white oak, applewood and maple. Eco boards all have direct colors that can be referenced. No more painting and so on.

If you want a higher process, you can choose a custom processing type of process, choose an environmentally friendly substrate, and then process natural veneer, and then carefully do a few paints. This works very well.

Thirdly, the woodworking board is brushed with mixed paint just like the wall is brushed with putty powder. The fir board is varnished because the grain of fir wood is relatively beautiful, and after the varnish is done, his effect is very heavy, it looks luxurious, and it also has a natural atmosphere. Choose fir wood and don't have veneer, which will indirectly cause waste.

If you choose finger-jointed woodworking board, it is also feasible to use fir board as the base material to process it into woodworking board, which is good because it avoids the hollow problem of general woodworking board, and the stability is higher. This material can belong to the category of solid wood, adding layers to the product. After processing, the corresponding natural veneer is selected, and then the paint is made, and this process is the main direction in the next three to five years.

Generally bai wooden furniture, the interior is du

There is no need to make lacquer. The role of paint zhi is to protect the wooden furniture, back to increase the aesthetics at the same time, and the answer is that there is no need for these two functions inside, pure wood, natural, on the one hand, it is environmentally friendly, and more importantly, it is to prevent the impact of various harmful substances in the paint on the human body. In traditional Chinese furniture, only the exterior is painted, and the interior is not painted.

If you use solid wood (such as fir wood), if there is no aesthetic problem, it is recommended that it is best not to paint, the most natural is the best, which is also good for the things stored in the furniture. If it is made of composite sheets, you can use clean water, because the composite material itself has a chemical composition.

Look at what kind of materials are used in the woodworking, such as the cabinet that is directly connected to the ecological board, the DAO surface veneer does not need to be brushed, and the cabinet is made with MDF without wood power pattern, and it depends on whether the veneer is with veneer or without veneer, it is recommended that you let the carpenter use the ecological board to directly hit the cabinet, the ecological board has strong nail grip and is also decorative. After laying a finished cabinet door, you can directly order a finished cabinet door or let the worker master help you make it, but it is still recommended that you customize the finished cabinet door, and the new cabinet door made by the worker master is bound to be painted, which will aggravate indoor pollution, and the smell will not disappear for a long time. The finished cabinet door is also higher grade than the freshly beaten cabinet.

You should be painting, even if it's just two primers. After the first brush, sand it with an abrasive cloth, and then brush it a second time. In this way, the surface of the plank is smooth. There are also benefits of brushing: it can prevent mildew and moth.

To summarize as follows: must be brushed.

bai. You should be painting du, even if it's just two primers. After the first brush is done, the special abrasive cloth is sanded, and then the second time is brushed. In this way, the surface of the plank is smooth. There are also benefits of brushing: it can prevent mildew and moth.

Choose a more environmentally friendly paint. Otherwise, the smell in the cabinet is too unpleasant, although it is closed and the volatilization period is prolonged. The main thing is to prevent the deformation of the wooden board after being wet. If you paint it, it won't be out of shape. But you have to use dry wood.

It should be brushed. The main thing is to prevent the deformation of the wooden board after being wet. If you paint it, it won't be out of shape. But you have to use dry wood.

There are paper-like packaging and edge banding materials, which are very easy to use; It can also be treated with paint, mainly to prevent the long-term moisture absorption and deformation of the open board, and the release rate of formaldehyde is reduced.

The method you are talking about can make a difference. You can also buy a thinner PVC edge banding thicker and stick it with 502.

Formaldehyde should be volatilized, not isolated by topcoat or edge banding! It is volatilized from a single piece of wood. If the topcoat really has this effect, everyone will say that they use fully painted MDF in the morning! (Generally, the wood topcoat itself is not waterproof, so there is no reason to have the effect of blocking gas).

But I'm curious, how wide the seam you are talking about, the top coat is a thin layer, and it can't play a sealing role, right?

If the side seal is not good, you can find a pendulum to play more small needles, which is practical and does not affect the appearance.

Formaldehyde release is useless if you seal those edges, the key is that you must figure out what standards the manufacturer uses when you buy. The domestic standard E1 and E2 are no problem. Formaldehyde in the plate is a chronic release that can last up to 15 years.

You can not paint, if you need to paint, you must brush environmentally friendly water-based paint, Germany Dufang is great, there is no smell at the painting site!

It is better to brush the water-based paint once to protect the wood, which is economical and environmentally friendly.

There is no need to paint the interior, just polish it.

Water-based paints can.

It is better to use multi-layer solid wood boards or fir planks to decorate the house.

Multi-layer solid wood board is made of three-layer and back multi-layer veneer or thin board, which is made by sticking wood board glue under high temperature and high pressure, which is very stable in structure, very good in flatness, relatively strong in stability, and formaldehyde is also particularly low. Fir board, also known as fir integrated board, is an environmentally friendly product, all made of high-quality wood, durable, generally no insects, not easy to deform.

Ecological board, also known as wood incense board copy, melamine board, the ecological board itself is made of wood, and it will also contain a small amount of formaldehyde, but the main quality is selected, and the environmental protection level is E1, which is very safe. Moreover, compared with other boards, the ecological board also has an advantage that it is paint-free, and the advantage of not painting is that it reduces the emission of toxic and harmful substances caused by paint, which is more environmentally friendly.

Generally, when the home chandelier is installed above the table, the vertical distance between the chandelier and the table cannot be less than the meter. The distance between the chandelier and the table is generally between meters and meters, which is the most suitable distance. The distance between the chandelier and the ground is generally about a meter.

The size of the chandelier can be selected according to the actual situation of the room.

Because the frame is already a sandwich panel, the strength of the nine centiboard is enough to make the back panel of the wardrobe.

Use wear plates, some of the inside of the board are not painted, and the outside is a custom door.