One network cable, one router, one hub. 6 people how to share bandwidth

It is impossible to distribute evenly. Shared internet access is possible.

Modem router. Leave one hole for the hub for the router, and connect the other to the computer.

The hub connects to other computers.

Open IEGenerally, it is input, and the route is set to enter the account password.

The computer is set up to automatically assign IPs

Resources cannot be divided equally, and it is a great waste to divide them equally, and they can only be shared, ** line - cat --- router--- switch (hub) - computer user.

Are they all wireless routing? Many hubs have routing capabilities.

Theoretically, broadband to the router, then the network cable to the hub, and then to a personal computer is fine.

Reasonable allocation of bandwidth is set on the router, generally there is no need to set, even if you do, it is only to limit the bandwidth of each port, not to mention that you are not 6 people often surf the Internet at the same time.

A network cable I rely on 6 people to use 7 network cables If the route is 8 ports, it will be good to plug it directly One plug in the main line 6 of you plug in the secondary line and then set up the route in the route According to his steps Next step next step If you want to distribute the network speed evenly, there is no need to divide it The next P2P makes a **limit on the line.

A switch must be added.

Generally, there are 4 ports.

This thing is very simple, people who are generally not skilled in technology must first turn off the firewall, and then talk about sharing.

Sharing is very simple, just right-click on the folder you want to share, select Share, then Advanced Sharing, and then tick the box to share this folder.

Just find a network cable with a normal connector (the kind you usually use, don't make a special one) to connect the two computers directly.

Set the IP to the subnet mask and default gateway for machine A, and set the IP to the subnet mask for machine B, and set the default gateway for machine B.

That is, the default gateway of machine A is the IP address of machine B, and the default gateway of machine B is the IP address of machine A.

A and B will each set up the folder to be shared.

Enter machine A in the IE address bar""You can access the B machine, and the B machine will enter it in the IE address bar""You can access machine A. Or directly double-click the desktop "Network" (Win7) or "Network Neighbor" (WinXP) to access each other.

1.To connect 2 PCs with a crossover cable

Second PC: Subnet Mask: Gateway:

3.Once you've set it up, create a new folder and set up sharing.

Note: Win7 sharing should close the password, otherwise others will not be able to access.

It can also be set up to share with the same workgroup.

1.If you want to connect 2 PCs with a crossover cable - whether the specific connection is successful can be plugged into the network, after setting each other's IP addresses (you can refer to the method on the 2nd floor) use the start-run-cmd command, and then ping the other party's IP to see if it can be pinged.

If the ping is good, your network is fine.

2.To set up sharing, right-click on the folder on the machine you want to share, share, if there is no sharing option, check whether the server service of the machine is enabled.

3.Transfer the file, start it on another machine, enter the IP of the machine you just set up to share, and if the connection is successful, you can already see the prompt to enter the password or see the shared folder directly.

You try to connect directly, and an IP segment is complete.

1. You can't connect multiple routers, because routers can only be used under different networks. In the same network, only switches can be used. According to what you said, you can only buy a wireless router for one annunciator.

Upstairs some people say that the router is used as a switch, although it can indeed be used, but it is not advisable, the router, generally only four intranet interfaces, if the switch is used, the external network interface can not be used, that is, with a router, only three intranet interfaces can be added, the switch interface is more, ** is also relatively cheap, so generally no one will go out of their way to buy a router to be used as a switch, I hope the landlord will not be misled).

2. If you don't want to connect to other people, there are only two ways, one is to set a password, and the other is to restrict users, such as setting which network cards can be connected and which cannot. It can also be set in reverse to restrict which network cards are connected, and others can be connected. But from the above, neither option is suitable for you.

3. The router can automatically assign IPs, and you don't need to set it.

In your case, since your guests are mobile, it is finally recommended that you use only one router with a stronger signal, and you cannot set a password. But you can go to the routing settings and blacklist the network card mac of some people who are not guests, but rub your network every day. That's it.

Yes, follow these steps:

1.For example, one router is set to the primary router, and the other is the secondary router, and the IP address is set to , , ,

2.Connect the network cable that can be connected to the external network to the WAN port of the main router, select "WAN port connection type" as "PPPOE" in "Network Parameters--WAN Port Settings", enter "Internet ID" and "Password", click Save, and then restart the router.

3.Use one network cable to connect one end to the LAN port of the primary router and the other end to the LAN port of the other secondary router. Each secondary router is connected to the LAN port of the primary router in the same way.

4.At this time, the network cable can be connected to the other LAN ports of the secondary router, and the Internet can also be accessed.

5.Set the SSID and access password of the wireless connection transmission signal of each secondary router to allow multiple routers to have signals.

It's very simple 1, first use a wireless router to dial, log in to the configuration interface of the wireless router, enter the ADSL account and password, so that the wireless router can replace the computer to dial, and everything connected to the wireless router, whether it is wired or wireless, can access the Internet.

2. If you have a lot of Internet access equipment at home, you can connect the second and third routers to the router used for dial-up as a secondary exchange to expand the number of Internet ports.

3. Wireless routing can set the password of wifi hotspot, don't worry about outsiders connecting 4. The default setting of wireless routing is to turn on the DHCP function, and all devices connected to the route will be automatically assigned IP, no need to manually configure.

Do you have to turn on the computer and click on the "broadband connection", then fill in the password, and then click to connect, and then you can access the Internet?

You first need to log in to the management interface of your router, then find the WAN port settings, set the WAN port to PPPoE mode, and then fill in the broadband password. After saving, the dot connection is fine.

Follow the steps below:

1.Plug the cable you used to access the Internet into the WAN port of the wireless router. Generally, routers will indicate which is the WAN port and which is the LAN port, and the colors will also be distinguished, such as TPLlink's router, the WAN port is blue, the LAN port is yellow, and the general router has only one WAN port and multiple LAN ports.

You first have to recognize which is the WAN and which is the LAN.

2.Take another network cable, plug one end into the LAN port of the router, and plug the other end into your computer. Most routers will automatically assign an IP address to your computer. Note that the IP of the network card plugged into the network cable of the computer should be set to be obtained automatically.

3.If you look at the bottom of the wireless router, it will generally write the login address of the router's web management. For example, tplink's is generally.

Tengda's in general.

After you determine your router login address, enter your login address in the browser of the computer, and then a window will pop up to you to log in. But this will also be written under the router, you just have to write it down.

4.After logging in to the management interface, you first find the place where the WAN port is set. Different routers may be called differently, but you can find the right place for the word wan.

Please set the WAN port to PPPoe, and then fill in the password given to you by the operator. Once saved, tap Connect. If the dial-up is successful, your router will be able to access the Internet at this time.

Connect the router to the switch. The main line is connected to the WAN port of the router. The two computers are connected to the LAN port of the switch.

The school's assigned IP is set in the router.

The routing LAN port is connected to two machines, and the router generally has several LAN ports.

The WAN port is connected to the outside line, and if there is a cat, the cat will be answered.

Routes need to be set, such as the type of Internet connection, Internet account and password, and the network of the telecom needs to clone the MAC address. ，

**The cable is connected to modem, commonly known as cat, the modem network cable comes out to connect to the router, and the router comes out with two network cables to connect to the computer respectively. After connecting the cable, turn on the computer, open the web page, and enter it in the address bar of the web page, if it doesn't work, enter it. The password is admin.

After setting it up in the router settings, you can surf the Internet normally.

Connect the router to the power supply first, then connect one end of the network cable to the main line of the router, and then connect the other end to the dial-up network port, and then connect the lan1 and lan2 to the two computers with the network cable, start IE on any one, enter, the user name and password are generally admin, and then dial the broadband number in the Internet wizard, then both computers can access the Internet.

First of all, use a network cable to connect the router and broadband, be careful not to plug in the wrong port, is the wan port, the remaining two network cables are connected with two computers, 1 2 3 4 ports on the router can choose any two, and then the settings of the router are entered in the Internet Explorer address bar, and the username and password are admin

Then find the Setup Wizard and enter your broadband account password step by step. If you can't access the Internet normally, please contact again.

**Line: Broadband box, network cable, router, WAN port, router LAN port 1, network cable, computer 1

Router LAN port 2 network cable computer 2

Router LAN port 3 network cable computer 4

This is not correct, he is connected from your route, there is no need to dial at all, after you set up the account and password in the route, two network cables are connected, one is connected to your computer, and one is connected to his computer, so that both can access the Internet. As for what you said is very stuck, because he has taken away your bandwidth, you have to determine what your original bandwidth is. If it is 2m, it is not recommended for 2 people.

If it's 4m, then you can limit the speed in the route.

This is wrong, if both of them use routers, they don't use a broadband connection. You may have made a mistake with which plug.

If you have a router, you don't need to enter a password, because a password has been set in the router, and the network cable connected from the router can be connected to the computer to access the Internet. The Internet card is because there is one more person to share your Internet speed, of course, it is slow