What to do if MP5 can t be stopped on the computer

This is actually the reason why the USB flash drive can't pop up.,I hope you don't mind if I copy a piece of text elsewhere.。

When you delete USB flash drive safely, you often encounter a message that says, "The 'Universal Volume' device cannot be stopped, please stop the device later." In this case, can you forcibly unplug the USB flash drive? Of course not!

At this time, if you forcibly remove it, it is easy to damage the USB port of the computer or your USB flash drive.

The first method (which is also the most common method I recommend to everyone): Often when we take out the files or data from the USB flash drive, we use the "copy" and "paste" methods, and if the file on the USB flash drive is copied, the file will always be placed in the system's clipboard and in a standby state. And if we want to delete the USB flash drive in this case, the above prompt that the USB flash drive cannot be stopped will appear.

The corresponding solution is: empty your clipboard, or copy a file on your hard disk and then paste it, at this time you delete the USB flash drive prompt to see if it is successfully deleted?

Second method: If you don't think the above method is working, open it"Task Manager"window, click"process"tags, find""process, and then click"End the process", a Task Manager warning will pop up, asking you whether to close the process or not, click on it"Yes", i.e. closed""processThen delete the USB flash drive and you can delete it normally.

Note when using this method: if there is more than one""process, you need to put more than one""Processes are all shut down.

The third method: This method is also with the help of Task Manager, click"process", search""process and end it. At this time, you will find that your desktop is gone, please do not panic, continue to the following operations, click "File" - "New Task" - enter OK in the task manager.

Then delete the USB flash drive, and you will find that it is safe to delete.

The fourth method: This method is the easiest, but most time-consuming, and that is, restart your computer. Beg!!

The mp5 has a reset button, which is a small hole in the fuselage, and you can find it to prick it with a fine needle, but if it doesn't work, it is recommended that you go to the maintenance department.

MP5 has a reset button to reboot and it's good! Frequently update the firmware of the MP5 brand.

Connect to the computer and try it, and it should be good to turn it on.

MP4 generally has a reset button·· It's a small hole, just take a pin and push the switch inside!

Reasons:1It is caused by overheating of the charging environment during the charging process.

2.Caused by a failed firmware upgrade.

3.Physical impact causes damage to internal components.

4.Charge or use in an excessively humid environment.

Workaround:1Return to the factory.

2.Re-burn the machine, and seek solutions to the burn-in failure on the official website or online.

3.Return to the factory. 4.Dry with a hair dryer (not adjustable to high temperature), if it is invalid, return to the factory.

The above is for reference only, please judge carefully.

If this is not the case, the best solution should be to "return to the factory".

Please understand that there should be a place where I am not able to do so, and my ability is limited.

As for the second floor, it is said that it is poisonous, it is impossible, the virus is not used to destroy the drive of the mobile disk, but to steal and destroy the data, and if it is toxic, in this case, even the computer can not be connected, how to check and kill?

It must be out of power, change to a 220-volt charger.

The landlord's problem has also been encountered n times below, and according to experience: there are several possibilities:

The firmware itself is imperfect, resulting in system instability. and cause frequent crashes.

2.The quality of the flash memory chip that comes with the fuselage is not good. As soon as you load a little more stuff, it will bring a lot of load to the machine.

Solution: Pack a little less.

3.There is a problem with the fuselage hardware.

Solution: Give the dealer a surprise repair.

The landlord can try the above solutions. See if you can solve the landlord's problem.

There are two reasons why MP5 crashes, 1. There is a problem with the battery, which will easily lead to a crash.

2、Hit the virus,(This possibility is more likely) Sometimes you have a virus in your mp5,Even if it is formatted, the virus will not be cleaned up,(You go to the repair place,Let him reinstall the program for you,It won't cost a lot of money)

It could be that you're doing it too fast, or it's possible that something is wrong with your software.

The use environment is not good, so that the machine is overheated or too cold, and there are too many operations, just slow down.