-
The quota for the installation of air conditioning water pipes (nationwide) is as follows:
1) The air conditioning water pipes in the computer room are applied to the sixth volume of "Industrial Pipeline Installation Quota".
2) The eighth volume of the plumbing pipe application of the air-conditioning water system "Plumbing Pipe Installation Quota".
3) The circulating water pipeline is applied to the eighth volume of "Plumbing Pipe Installation Quota".
Addendum: The new museum is a civil building.
-
Question 1: The condensate of the air conditioner is made of PVC water supply pipe, and the quota of the hall Zheng Oak should not be set with the quota of the drainage pipe?I don't understand what you mean, you can use pvc, but you must remember to put it downhill, otherwise the water will flow backwards, you should you** air conditioner put a single air conditioner will not go to connect to the pvc water pipe The interface can generally be directly connected with 20 2 Dan directly put it inside is just right, but the glue must be more.
Question 2: Which one of the quotas for air conditioning condensate pipes and rubber and plastic insulation pipe sleeves is used in air conditioning chilled water pipes and condensate pipes, and Class A non-combustible insulation materials are only inorganic insulation materials: mainly: 1, aluminum silicate 2, centrifugal glass wool 3, composite magnesium silicate 4, rock wool, mineral wool.
Question 3: How to set the quota of the air conditioning condensate pipe If the design material is rigid PVC, it is okay, if the design is galvanized steel pipe, then it is necessary to set the quota of domestic water steel pipe.
Question 4: What is the quota for the air conditioner cold water pipe sleeve Eight volumes, is it indoor?If yes, remember to change the main material for the installation of plastic water supply pipes (hot melt connection).
Question 5: What is the purpose of the air conditioning condenser pipe in the project to cool the refrigerant.
The temperature is generally forty or fifty degrees, which is related to the ambient temperature.
Question 6: How to set the quota for PE of air conditioning condensate pipe If the design material is rigid polyvinyl chloride, it is okay, if it is a galvanized steel pipe for design, then it is necessary to set the quota of domestic water steel pipe.
Question 7: How much is a meter of condensate pipe installed in an air conditioner?This one is not expensive.
Question 8: How to replace the protective sleeve of the condenser pipe of the air conditioner Open the side shell of the air conditioner, and there is a condenser pipe interface inside and fix it with wire.
Question 9: What is the best material of the air conditioning condenser pipe 1The function of the condensate pipe is to remove the condensate from the water accumulation pan of the fan coil unit (or air conditioner).
2.The condensate pipe is generally UPVC or galvanized steel pipe.
3.**It is that galvanized pipes are expensive, but some high-rise or super high-rise pipes must be galvanized steel pipes.
4.There is a disadvantage in using UPVC, because the outer diameter of the plastic pipe is different from the metal pipe, the size of the insulation pipe and skids needs to be processed separately, which invisibly increases the cost.
-
Summary. **Air Conditioner Water Turbine Duct Installation** Checklist.
**How to calculate the construction cost of various types of steel pipes?
140-160 a square.
Is there a unit price for various types of steel pipes according to m?
Is there a unit price for various types of steel pipes according to m?
I can't find this.
Thank you then. You are welcome.
If only water enters the pipeline, the angle valve of the external unit is not opened, and the refrigerant is not discharged into the pipe. Then it's easier to deal with this way. Just use nitrogen to blow off the pipe, and then use a vacuum pump to vacuum to remove the water, the vacuum time is a little longer, and the water removal effect is better when the temperature of the pipeline is high. >>>More
system cleaning, hydrostatic test and operation.
In the process of installing the air conditioning water system, the water pressure test of each section has been qualified, and when the system water is flushed, due to the flushing requirements, the valves, filters and other instruments that cannot be flushed are removed, and the temporary pipeline of flushing and drainage is connected to the pipe system at the same time. And when flushing, refrigeration equipment and air conditioning equipment can not enter the flushing, so after the system flushing is qualified, the formal pipe system is reset, and then the system working pressure leak detection is carried out. >>>More
If it doesn't run, the water temperature is high if you don't turn on the air conditioner, because the electronic fan doesn't run and can't dissipate the engine, when you turn on the air conditioner, the cooling fan will not stop running, so the engine can dissipate heat and the water temperature will not be high. But when you don't turn on the air conditioner, the fan turns again when the water temperature is high, and then stops again when the water temperature is normal. Specifically, there are the following aspects: first, you need to check whether the water tank is not well dissipated and blocked, or the fan is not running, or there is a problem with the water temperature sensor. >>>More
Air conditioner installation specifications and precautions. >>>More
PPR water pipe is one of the most commonly used water pipe materials in home decoration, the following are several of the most common installation methods: First, first get the line right, and then groove on the ground, I think it is better to let the plumber do it, because at least people are professional, in case the water pipe leaks is not very good. Second, from the connection of the PPR pipe: >>>More