What should I do if I can t read the disc I bought?

1.Confirm if the disc is causing the problem.

1-1.Clean and inspect the disc for damage: Use a disc cleaner or a lint-free cloth to clean the disc of dust or dirt. If the surface of the disc is badly damaged, try replacing the disc to confirm.

Update the BIOS to the latest version and update to Windows Update

Enable and reinstall the driver in Device Manager.

2-1.Enter [Device Manager] in the Windows search bar, and then tap [Open].

2-2.Click on the triangle next to the [*** CD-ROM drive] device type. Right-click on [Undetectable Optical Drive] and click [Enable Device]. Check whether the optical drive can be detected.

If the [Enable device] option is not displayed, your optical drive is enabled, and please proceed to the next step.

2-3.Uninstall the driver of the optical drive. Right-click on [Undetectable Optical Drive] and click [Uninstall Device].

Please click Enter a description.

Please click Enter a description.

2-5.Restart your computer. After you restart your computer, the system will automatically install the drivers. Check whether the optical drive can be detected.

3.Use the Hardware & Device Troubleshooter.

3-1.Enter [Troubleshooting Settings] in the Windows search bar, and then tap [Open].

3-3.Follow the on-screen prompts and try to resolve the issue, if the drive is still detected after using the troubleshooter, proceed to the next step.

4.Restore your system through a system restore point.

If you have previously established a system restore point, or an automatic system restore point, try to restore the system to the restore point that was last since the last normal boot.

5.System Restore.

If all the troubleshooting steps have been completed and the problem persists, do a system restore after the backup.

Several ways, from the simplest to the most complex:

Since it may be that the disc is of poor quality, or that the optical drive pick-up ability is reduced, we can do this.

Clause. 1. Find a replacement disc that sells the disc (whether it is a disc problem, change the disc) first. Second, look at the disc to see if there are stickers and other stains, wipe clean.

Clause. 3. Put the disc in the refrigerator and freeze it for 15 minutes, read it quickly, and the effect is slightly better.

Clause. Fourth, gently wipe the bald head with a sanitary cotton ball to remove the dust.

Clause. 5. Rotate the laser power potentiometer on the bald head trolley of the optical drive about 20 degrees clockwise and try again.

Clause. 6. Change the optical drive.

Clause. 7. Change the computer.

Of course, you can also try it on other machines, if you can read it, make a mirror image on other machines, and then use it as a virtual optical drive on your machine, you can also use it.

It's normal that you can't read it if it's not genuine.

If you can change it, then change it.

If you can't read any disk.

That's the problem with optical drives.

Find a new one for a sale, or try a different CD-ROM drive.

There should be a problem with the disc, pirated. Go try a different one.

See if the optical drive matches the disk, if the VCD optical drive is not read***.

Computers with optical disc devices, compact discs.

01 Problems with the disc itself:

If the disc cannot be read, it may be a problem with the disc itself, so please check whether the disc is in good condition.

02 Dust on the computer's optical drive:

The computer optical drive may not be used for a long time and there is dust, which will also cause the disc to be unreadable, so what you need to do is to take a clean cloth and wipe it clean.

04 If you have tried the above methods and still can't read the CD, it may be that the computer's optical drive is broken, and you need to go to a computer repair shop to repair it.

I believe that most people have encountered that the computer disc can not be read, put in the optical drive computer can not read the disc, the optical drive makes a "squeak" sound, some disc files and directories can not be read, or the whole disc can not be read, and even sometimes the drive makes a sound like a motor to make the whole machine crash.

Why can't the disc be read, what should I do if the disc can't be read? It can be found that different brands of optical drives have different reading capabilities for such disks, which shows that the engraved optical disc cannot be read not due to poor burning. After careful comparison, it was found that the disc with this phenomenon is thinner than the normal disc and cannot be clamped up and down by the optical drive when placed in the optical drive.

Slipping in high-speed rotation, uneven speed, inaccurate positioning, resulting in reading errors, and even motor-like sound, causing the machine to crash. So how do you repair this kind of disk? In fact, it is very simple, as long as the position of the optical drive chuck in the middle of the disc is thick.

In order to make the optical drive clamp the disc, cut it into small pieces with white tape and stick it into a ring around the middle of the pin (both sides can be), and the disc can be used normally after this treatment, and the things that could not be read can now be read, and there is no longer a "squeak" sound, so that the disc is "youthful" again. Of course, if you buy a genuine CD, there will be no CD that can't be read, so I still hope that everyone will buy a genuine CD.

There is also a better, simpler, and safer solution: just buy a VCD disc protector from the store and attach one to kill two birds with one stone, which can not only protect the disc, but also solve the problem that the disc cannot read data due to slippage. The specific way to use it is:

When using, do not tear all the pads of the disc protector first, only tear a little. Then use scissors to cut the protective film pad paper up and down, left and right four times, leaving a square pad paper in the middle, and then paste the disc. This square pad can play a role in thickening the inner ring of the disc.

In actual use, it was also found that leaving this square pad paper has another advantage, that is, because this place is not sticky, so that you can hold this place with your hands, and when you paste the protective film on the disc, it can be successful at one time, smooth and beautiful, and will not be wrinkled. In addition, you can also cut this square piece of paper into a circle, hexagon, each cluster shouting a variety of things, big and small, whatever you want.

Of course, this is just an introduction to one of the cases of the CD-ROM to deal with it, if the burned disc cannot be read due to the damage of the optical drive or the damage of the CD-ROM, the notebook CD can not be read, and the blank CD cannot be read by Zheng Mo, then this method is not applicable.