How to flash Huawei T8828

Sign up for the Huawei forum and you'll have a tutorial!

It's not difficult to flash the machine.,Find the right way.,There are a few points that need to be paid attention to.,Just notice it.,There is a flashing package in the deep forum.,You can try it.,There's also a flashing tutorial.,You can refer to it.,Ask the master if you don't.。

Use the brush master, which has a Huawei 8825D bag, and you can brush it directly with one click. Hope.

About Huawei T8828 flashing tutorial, as follows:

Flashing Notes: The flashing process needs to be performed under the Windows operating system.

Flashing is risky, so be careful. We do not assume any responsibility for any problems caused by flashing.

For the sake of safety, please make sure that your phone has enough power before flashing, preferably more than 60%.

There are two ways to flash the machine: forced flashing and normal flashing.

1.Force flashing.

Prepare an SD card with a capacity of 512M or more. Format the SD card (optional).

Make sure that the SD card flashing package is copied to the dload directory of the SD card.

When the phone is turned off, insert the SD card, and press the volume up button + volume down button + power on button at the same time, and the phone will automatically enter the flashing mode.

Then start flashing, prompting "Upgrading, do not power off", and the flashing progress is displayed.

When the progress bar is full, the phone will automatically restart, if not, please remove the battery manually.

2.Flash normally.

Prepare an SD card with a capacity of 512M or more. Format the SD card (optional).

Make sure that the SD card flashing package is copied to the dload directory of the SD card.

Insert the SD card into the mobile phone to boot up, enter "**" in the dial pad interface, click the dial button to enter the project menu interface, select ProjectMenu->Upgrade-> Card Upgrade, and select "OK" in the pop-up dialog box to start flashing.

There is a progress bar during the flashing process, and the phone will automatically restart after the progress bar is finished.

Put the ROM package on the SD card, then enter the flash mode, double WIPE, enter the SD card and select the ROM package.

I guess that's not okay.

1,First install the next flashing wizard on the computer,Link the phone and root the phone first。

2. Choose a ROM bag in the C8812 area of the flash wizard rom market.

3,Find a memory card of more than 512M,Format it first,At this time, there is nothing in the card, whether it is a file or a folder,Copy the previous good rom package to the memory card。

4. Install the card, deduct the battery, wait for about 10 seconds, install it, press and hold the "power button" and "volume button +" at the same time, wait for more than 10 seconds (don't let go when the Huawei chrysanthemum logo appears), at this time to enter the recovery mode (that is, the flashing interface), operate in it The volume button is up and down, and the shutdown button is the confirmation key.

5, brush the machine on the Internet in Chinese and English, compare yourself, I will explain to you according to the Chinese, because my own has been made into Chinese, ha I have not forgotten in English for a long time. First of all, A. clear the data and factory reset B. clear the cache data. These two are the most important, and you must not miss them, otherwise you will become bricks.

Secondly, select the zip package from the SD card to install (that is, find the ROM package you just placed in it), find, confirm, start the installation, install it completely, and then restart the phone OK. At this time, the phone is the system you just flashed into.,It's a little slow to enter it for the first time just after brushing.,After that, it's normal.。 Hope the answer is helpful.