Lenovo A678T flashes the iPhone package

It is recommended to follow these steps:

2. Two ways:

1) When the phone is turned on, go to the phone settings - storage - menu to the bottom, and click to restore factory settings.

2) Turn off the phone completely, then press and hold the "Volume Down button" + "Power button" at the same time until the Hboot interface appears on the phone, then let go, press the Factory Reset item in the volume selection page, and press the power button to confirm to clear all data and restore to factory settings.

3. After restarting the phone, the phone will be restored to factory settings.

Friendly reminder; This type of flashing behavior has certain risks, so use it with caution.

Generally speaking, flashing is to reinstall the system for the mobile phone. Flashing can make the functionality of the phone more complete, and it can restore the phone to its original state.

In general, the Android phone system is damaged, resulting in dysfunction or inability to turn on, which is usually solved by flashing.

Generally, the mobile phone flashing machine is divided into line brush, card brush, soft brush and factory brush.

Line or card swipe.

1. The line brush needs root, and the root method is attached. If you are worried that the root will affect the warranty and upgrade, you can unroot it.

Line brushing can be done with flashing software, such as deep flashing and flashing wizards.

Second, card swiping usually refers to recovery flashing.

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then install it, and press and hold the power button at the same time when the phone is turned off.

Home button until the Recovery screen appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash (power button to confirm, volume up and down keys to move), the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Selected. wipe

data/factory

reset, press the power button to confirm, and then press yes with the selected yes; Then select Clean

CachePartition is OK, and yes is selected.

Select install

zipfrom

sdcard

Press the power button to confirm, and then select again.

choose

zipfrom

SDCARD press the power button to confirm, then select the rom flash file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. In this case, select reboot

system

Press the power button to restart the phone. The first reboot takes a long time, so be patient! This is the end of flashing.