How does the CV4500 profilometer evaluate roughness?

About the profilometer and roughness meter The profilometer is not the same product as the roughness meter, the main function of the profilometer is to measure the contour shape of the surface of the part, such as: the groove depth, groove width, chamfer (including chamfer position, chamfer size, angle, etc.) in the groove in the auto parts, the straightness of the cylindrical surface surface line, and other parameters. In summary, the profilometer reflects the macroscopic contour of the part.

The function of the roughness meter is to measure the surface processing quality of the grinding and finishing processing process of the surface of the part, in layman's terms, that is, the surface of the part is not only processed (roughness is called the finish of the old national standard), that is, the roughness reflects the microscopic situation of the surface of the part processing.

However, according to the translation of Japanese products, there is no distinction between profilometer and roughness meter, according to the translation of Japanese products, it is called wheel shape measuring instrument, which can measure the macro contour of the surface of the part, and can measure the microscopic contour of the surface of the part, so there is a way to distinguish it: it is called a profilometer, and it can measure the roughness meter, which is called a roughness measuring head (that is, a roughness measurement module), and only the one that can measure the contour is not a roughness measuring head, but it is also called a profilometer.

Second, about the three-coordinate measurement profile and roughness.

The CMM can not measure the roughness, as for the profilometer that measures the surface of the part, it depends on the measurement accuracy of the CMM and the requirements of the surface profile of the part.

In fact, if you want to evaluate a roughness, you can evaluate it according to the degree of perfection of the whole.

I think like this silhouette, if you want to be cheap and rough, this can be directly evaluated from the official.

A roughness, we have to clear the stream through the results of the instrument it detects.

This model of the profiler can be used to evaluate the roughness.

Micro 4500 profilometer, how to evaluate roughness? I think the subtle 4001 evaluation of roughness is based on their standard of roughness.

Is this speed to be evaluated according to a certain value?

CV 4500 Ronghuiyi, how to evaluate roughness? I think this should also have a standard class.

The key is the problem you master.

CV500 profile one, how to evaluate roughness suggests that you land on the relevant profile one**.

And if you evaluate roughness, it's actually about the feeling you feel when you touch it, the tactile sensation, and so on.

How does Xiwei 4500 profilometer evaluate roughness, I don't know what this roughness is.

CV4500 profilometer how to evaluate roughness consult the profilometer? Standard**.

The 4500 profilometer can be used to evaluate the excess.

The acceptance steps of the profile roughness tester are as follows:

One. Check whether the appearance is complete, and there is any accidental damage;

Two. Check whether the accessories are complete;

Three. Installed, booted up, and the software interface is normal;

Four. Accuracy and repeatability testing with standard balls and roughness samples;

Five. If the above processes are qualified, the two parties will sign the acceptance agreement and the acceptance will be completed.

Check and check the model, check the parts for defects, take the sample for testing, and pass the test.

Performance accounting measures roughness, which is very good, and this roughness, many people still use this.

He knew the length, and the roughness was the latest calculation.

Like Wilson's, Luke's mopping floor is very useful.

The roughness measured by Will's first-line profilometer is quite good.

Mel County London Speed Degree. This is very good for you to measure.

For the new round of Bamboo Peach Cave, it is very cliché, and this flower can be seen.

Taylor has repair points and service stations in the country. Beijing and Shanghai. If there is a problem with the probe, it will not be easy to solve, and it is likely to be replaced.

I don't know the model of your probe, generally a probe** is more than 1w, and some special probes are more expensive. Moreover, the delivery time of the unconventional test head takes 1 to 2 months.

The United States Taylor Hobson roughness profiler series products have several innovative series of products, you need to explain the product age clearly, you can visit the company's ** inquiry, separate order processing is more expensive, and the time is long, need to order from abroad if the customs declaration time is also relatively long, the estimated cycle takes about 3 months.

Domestic now used can also, accuracy measurement and imported comparison data is not too much, imported do do better but generally do relatively high, if your requirements in the work difference requirements are not high in a few microns or a few wires of domestic no problem, domestic measurement is more convenient than imported.

The domestic brands of roughness profiler are now doing well: Virson and Will The accuracy and function can completely replace Japanese products.

Tokyo Precision Mitutoyo Both brands and value for money are very good.

First of all, determine whether the stylus has been worn out and cannot be used, if the stylus is normal and the operation is normal, then it is necessary to let the manufacturer's engineers do the accuracy inspection.