Apple mobile phone search positioning can not be located all of a sudden, and after a while it can b

It means that there may be a problem with the GPS of the positioning system or the signal receiving the positioning is unstable, which may be related to the environment you are in, try again in another place.

If you can't locate it all of a sudden, then it may be caused by the network, so you should check the network.

In this case, it may be the other person's mobile phone. When I was looking for it, there was suddenly no signal. In this way, it can't be located, and after a while, the phone has a signal again. This is the case.

The search function of the Apple mobile phone can't be located all of a sudden, because his network needs to be read, and you have to wait for the network to be normal.

For positioning, sometimes you need to turn on GPS and connect to the network for more accurate positioning. Sometimes you can't locate it all at once, probably because of an unstable connection.

It may be caused by the inaccurate positioning of the Apple mobile phone or the mobile phone in motion, or it may be that the mobile phone has been turned on and off.

The situation that the other party's mobile phone signal is unstable causes the positioning display to flicker and flicker, so it is normal.

This should be due to the poor positioning signal at that time, which caused the inability to locate.

The Apple mobile phone can not locate the location for a while, and after a while, it can be located, explaining the reason why your current mobile phone network is unstable, so the positioning is not accurate.

Your Apple mobile phone to find the location, all of a sudden can not be located, after a while can be located again, this is the problem of the mobile phone network signal.

The Apple mobile phone can't be located for a while, and it can be located after a while, then this may be the phone stuck, which causes it to be unable to be located, it is recommended that you refresh it.

If you lost your phone and have turned on Find My iPhone, you used another device to locate it but couldn't find it, there are several reasons.

First, the other party did not turn on the mobile phone after picking it up, and the device could not be connected to the Internet, resulting in the positioning system not working normally, so you could not find the location.

Second, the other party has turned on the phone, but has not turned on the network, or there is no lock screen password, and cannot enter the mobile phone to connect to wifi, and the network cannot be connected.

While you can't locate it, you can help protect your data by following these steps:

Change Apple ID password. By changing your Apple ID password, you can prevent anyone from accessing your iCloud data or using other services like iMessage or iTunes from your lost device.

Change the password for another internet account on your device. This may include email accounts, Facebook, or Twitter.

Report your lost or stolen device to local law enforcement. Law enforcement may ask for the serial number of the device.

Report your lost or stolen device to your wireless carrier. Your carrier can disable the account to prevent others from using calling, texting, and data features.

Remove a lost or stolen device from the list of trusted devices.

Taking Apple 8 as an example, the specific operation method for locating the phone is as follows: Tools: iPhone 8 operating system:

iOS first finds the "Find iPhone" function in the phone (some areas are coded to protect personal privacy). 2. Click on it and fill in the ID information you need to find. 3. After that, it will automatically locate the location of the mobile phone.

4. Then tap your phone, and two modes will appear. 5. **Sound phone will have a reminder to find iPhone. 6. Lost Mode will lock the phone, and if the phone is picked up by others, you can also provide them with information.

1. In the privacy settings, check whether "Location Services" is turned on. If location services are turned off, your iPhone won't be able to locate them.

2. There is also a possibility that the third-party software cannot use the location service normally, at this time we can try to uninstall the application, and then re-do ** and install the application, generally speaking, the effect of displaying the location can be achieved.

Hello, there may be a variety of original beam manuscript reasons for the positioning of the pro-Apple mobile phone to find the other party, and the specific situation may need to be judged according to the actual situation. Here are some of the possible reasons for the issue:1

Location sharing turned off: If they turn off options like Location Sharing or Find My iPhone in their settings, you won't be able to see their location. Make sure that the other person has given you permission to view their location and that location sharing is enabled.

2.The other person's device is in airplane mode or isn't connected to the internet: If the other person's device is in airplane mode or isn't connected to the internet, you won't be able to get their latest location.

Make sure that the other device is connected to the Internet and allow location sharing to run in the background. 3.Application Issues:

If the app you're using is malfunctioning or buggy, it may not be able to get the other person's location. You can try signing out and logging back in to the app, or test with a different location-sharing tool. 4.

Location service issues: If the other device's location services encounter problems, such as an unstable GPS signal, the location information may be inaccurate or not updated. We recommend that you check your device's location services settings and make sure it's turned on.

In short, Apple's mobile phone to find the other party's location may be affected by a variety of factors, if you can't get accurate location information, please first eliminate these common scumbag problems, and try to consult a professional for better help. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation.

Finally, I wish you good health and a good mood! <>

Summary. Hello Kiss is happy to answer this question for you. Apple's mobile phone positioning has been moving in one place, what's going on is because there is no Internet connection, so his location will not move if it can't be located.

We turn on the mobile and tap on the mobile settings. Tap Cellular. Find Find iPhone and tap on it.

Just check Wi-Fi and cellular. 1. Measure the position of the object with an instrument: GPS.

2. The position determined after measurement. 3. Put things in their proper position and make some kind of evaluation: follow the name positioning.

Grasp the value of the product.

Hello Kiss is happy to answer this question for you. Apple's mobile phone positioning has been moving in one place, what's going on is because there is no Internet connection, so his location will not move if it can't be located. We turn on the mobile and tap on the mobile settings.

Click to start the cellular mobile network and call the network. Find Find iPhone and tap on it. Just check Wi-Fi and cellular.

1. Zheng Chengkai used an instrument to measure the location of the object: global positioning system. 2. The position determined after measurement.

3. Put things in their proper position and make some kind of evaluation: follow the name positioning. Grasp the value of the product.

When the phone is out of battery, there is a display for charging, that is, it has been in one place and has not moved.

Wi-Fi is on.

Serious interference in the city, inaccurate GPS or slow positioning is also a major factor.

Summary. 1. Find iPhone can not find the location may be because the device does not have the location permission enabled, first open the phone's [Settings], enter [Privacy] - [Location Services] in turn, if the location service is turned off, turn on the switch on the right side, and then turn on [System Services], turn on the [Find iPhone] switch;

2. If the mobile phone network is temporarily faulty, you can try to turn on the airplane mode first, wait for a few seconds and then turn it off, restart the network, or restart the phone;

3. If you lose your phone, it may be that you haven't enabled location services to find my iPhone, or it has been turned off.

The iPhone is located and turned on, but the location cannot be found.

1. Find iPhone can not find the location may be because the device does not have the location permission enabled, first open the phone's [Settings], enter [Privacy] - [Location Services] in turn, if the location service is turned off, turn on the switch on the right side, and then turn on [System Services], turn on the [Find iPhone] switch; 2. If the mobile phone network is temporarily faulty, you can try to turn on the airplane mode first, wait for a few seconds and then turn it off, restart the network, or restart the phone; 3. If you lose your phone, it may be that you haven't enabled location services to find my iPhone, or it has been turned off.

Apple mobile phone location sharing is not received from each other, and the positioning is turned on.

Ask about custom messages].

1.It's because your location services are not turned on, turn on in Settings - Privacy - Location Services. 2.The network environment is poor, and the mobile phone cannot be located accurately. 3.Caused by a malfunction in the positioning system of the mobile phone.

Summary. Hello, I'm glad to answer for you, the reason for the failure of the Apple mobile phone positioning function and the solution are as follows: 1. Open [Settings] - [General] - [Access Restriction] in order 2. Since the access restriction function was turned on before, it is necessary to set a password, so you must enter the four-digit password here before you can enter.

The password is set by yourself, and it may be the same as your lock screen password or something else. 3. After entering the access restriction page, find [Location Services] and click to open 4. Then modify the current location service to the option of [Allow Modification] 5. After the setting is completed, we open the "Location Services" option on the iPhone again and find that it can be set manually.

Hello, I'm glad to answer for you, the reason for the failure of the Apple mobile phone positioning function and the solution are as follows: 1. Open [Settings] - [General] - [Access Restriction] in order 2. Since the access restriction function was turned on before, it is necessary to set a password, so you must enter the four-digit password here before you can enter. The password is set by yourself, and it may be the same as your lock screen password or something else.

3. After entering the access restriction page, find [Location Services] and click to open 4. Then modify the current location service to the option of [Allow Modification] 5. After the setting is completed, we open the "Location Services" option on the iPhone again and find that it can be set manually.

It's not a problem with the settings.,The day before yesterday will be used.,It's not from yesterday.,Is it Apple's background system adjusted?

It is also possible that the background data is updated.

Isn't it okay to wait a little longer and wait for the data to be updated?

That's right, it'll be back to normal then.

How long is it supposed to take? Can you help me ask?

This is not necessarily, you can shut down and restart first.

What does this shutdown have to do with it!

It has something to do with wood, just try it and you'll know.

I tried it yesterday and it doesn't work.

Did you turn off some features?

Summary. Hello, pro method:

1.Whether the phone is turned on, and whether the network on the phone is on. If not, this time to drive up.

3.After logging in, allow iCloud to use your iPhone's location, whether to choose well, if not to choose well, to log back in to choose well.

4.Find My iPhone is turned on or not, if not, turn it on.

5.Whether the mobile phone network signal is good or not, it is recommended to use 4G or Wi-Fi.

Find My iPhone can't locate in real-time, and the location keeps stuck where it was a few hours ago, what's going on?

If not, you have to log in. 3.After logging in, allow iCloud to use your iPhone's location to infiltrate, whether to choose well, if not to choose well to log back in to choose well.

4.Find My iPhone is turned on or not, if not, turn it on. 5.

Whether the mobile phone network signal is good or not, it is recommended to use 4G or Wi-Fi.

Summary. It may be that the device does not have the location permission enabled, just turn on [Find iPhone]; It may be that the mobile network is temporarily malfunctioning, and it is recommended to try to restart the mobile network; It may be that the phone has been turned off, and the phone location can only be found when it is turned on. The details are as follows:

1. Find iPhone can not find the location may be because the device does not have the location permission enabled, first open the phone's [Settings], enter [Privacy] - [Location Services] in turn, if the location service is turned off, turn on the switch on the right side, and then turn on [System Services], turn on the [Find iPhone] switch; 2. If the mobile phone network is temporarily faulty, you can try to turn on the airplane mode first, wait for a few seconds and then turn it off, restart the network, or restart the phone; 3. If you lose your phone, it may be that you haven't enabled location services to find my iPhone, or it has been turned off. The above suggestions are for reference only, I hope mine is helpful to you<>

Apple's location shows the location dozens of minutes ago, and then it can't find the location directly.

It may be that the device does not have the location permission enabled, just turn on [Find iPhone]; It may be that the mobile network is temporarily malfunctioning, and it is recommended to try to restart the mobile network; It may be that the phone has been turned off, and the phone location can only be found when it is turned on. The specific introduction is as follows: 1. Find iPhone can not find the location may be because the device does not enable the location permission, first open the [Set Joke] of the old liquid mobile phone, enter [Privacy] - [Location Service] in turn, if the location service is turned off, turn on the switch on the right side, and then turn on [System Service] and turn on, turn on the [Find iPhone] switch; 2. If the mobile phone network is temporarily faulty, you can try to turn on the airplane mode first, wait for a few seconds and then turn it off, restart the network, or restart the phone; 3. If the phone is lost, it may be that the location service is not enabled to find my iPhone, or it has been turned off.

When the other party's mobile phone is positioned at about four o'clock, it shows the positioning before 2:16 I feel that it should be out of battery to show the last position.

But now at about half past four, I can't find a place directly.

Is it that the positioning takes a certain amount of time, and the last position will be automatically closed, and even the last position will not be visible.

Dear,The other party shouldn't be a mobile phone out of power.,Maybe the mobile phone is out of quiet or open the flight mode.,There will be a delay in the update of positioning data.,And it won't automatically close the position after the most disturbance.。

But before, I could see the positioning of what time it was.

It is also possible that there is magnetic field interference on the other side, which will also be affected.

Roughly what it means is that the last location time I saw before is not real-time, it's not shutdown, and now it shows that the location can't be found, it's shutdown, is that right?

Even if the computer is turned off, it won't close the last position, right?

Well, yes, that's the truth. <>