What to do if I get such an error when installing Revit

What should I do if the Revit installation fails? Autodesk in order to avoid unusable or errors after the software is installed, in the software installation package.

Built-in a series of third-party language packs, patches and other environment installers (the wall crack is recommended to be optimized by Autodesk, so that the majority of software users can install different versions of the software). Therefore, when we install Autodesk software, we install the environment program first by default.

After experiencing n+1 installation failures and looking at the installation logs, the following reasons for installation failures are summarized:

1.The system has installed a higher version of the environment package than the built-in software;

2.The logged in system account does not have sufficient permissions to install system components;

3.The storage path of the software installation package contains Chinese characters.

I'm too lazy, so I'll just tell you about the solution to the first reason today.

Resolution. The system has a later version installed (Method 01).

Help. Open the installation log file, don't hesitate to pull the scrollbar directly to the last few lines, the front are some installation process records, and you can see it in vain, mainly the last few lines. Find the keyword failure and look back, which is the culprit of why your installation failed.

Finish. Uninstall an environment package of a higher version, such as VC and NET. I won't repeat it here, if you don't understand, you can chat with me privately.

Restart the installer, the installation is successful, good luck, eat chicken tonight.

The system has a later version installed (Method 02).

Run the command line by modifying the installer.

Skip the installation of the environment package and install Revit and other related programs.

1.Check the installation log file and repeat the above method 01 step 1, most commonly the software terminates the installer due to the failure of Microsoft Visual C++ installation.

2.Open the software installation package path and locate the backup copy to a different folder.

Put it in** you are free, as long as you can find it later. ), use Notepad to open the installation folder.

3.Look for the Run line where Microsoft Visual C++ is installed. Key combination Ctrl+F to find the keyword vc.

4.Remove the run command line related to Microsoft Visual C++.

Step 4 needs to be operated with caution, students with English proficiency in level 4 and below should pay more attention, in case you mistakenly delete the key ** line, please go to the previous backup folder immediately, and copy a backup of the setup to the installation file to replace the current file.

1.Check the installation log file and repeat the above method 01 step 1, most commonly the software terminates the installer due to the failure of Microsoft Visual C++ installation. 2.

Open the path of the software installation package, find a copy of the backup to another folder (put it in**You are free, as long as you can find it later...).

Remember to install it, right-click and select Run File in Administrator Mode.

The above is the teacher's response to this problem, if it can help you, thank you for agreeing and supporting.

Summary. Hello kiss steps are as follows:

1 If the Revit software cannot be opened and the page is stuck, you can try to delete all the temporary files in the TMEP file of the C drive of the computer and try to reopen the software.

2 temp folder is a temporary folder when the system is running, the contents of which can be deleted, in order to prevent software crashes, this folder is set to other drive letters in the system variables.

3 In addition to software crashes, file corruption is also a common operation in Revit.

4 If the Revit project file cannot be opened, you can try to check the check option when opening the file, so that Revit can automatically correct the errors in the file, and there is a certain chance that the project file will be restored to normal.

5 Of course, this kind of repair does not guarantee that the project file will be repaired every time, so it is still necessary to develop a good habit of frequent backups!

What should I do if a revit2018 file is opened with revit2020 and a critical error occurs.

The steps are as follows:1 If the Revit software cannot be opened and the startup page is stuck, you can try to delete all the temporary files in the TMEP file of the C drive of the computer and try to reopen the software. 2 temp folder is a temporary folder when the system is running, the contents of which can be deleted, in order to prevent software crashes, this folder is set to other drive letters in the system variables.

3 In addition to software crashes, file corruption is also a common operation in Revit. 4 If the Revit project file cannot be opened, you can try to check the check option when opening the file, so that Revit can automatically correct the errors in the file, and there is a certain chance that the project file will be restored to normal. 5 Of course, this kind of repair is not guaranteed to repair the project file every time, so it is still necessary to develop a good habit of backing up Danchang frequently!

The file version cannot be upgraded, and the 2018 opening can be opened normally, and the 2020 software is opened, prompting a serious error.

Hello dear. Recently, the new system software of the computer is unstable, don't upgrade it first, and use it again after a while, 2020 version.

Here's why:Cause: The error indicates that there is a problem with the display driver and Revit is unable to continue running.

Update your graphics drivers to the latest version from the manufacturer**.

Disable hardware acceleration.

Confirm that the installed graphics driver is compatible with the Windows version.

Make sure Revit isn't running for a long time. If Revit remains open at night or for a longer period of time, the drawing may become unstable. Restart Revit periodically to avoid this.

Revit is the name of a family of software from Autodesk. The Revit family of software is built for Building Information Modeling (BIM) to help architects design, build, and maintain buildings with better quality and greater energy efficiency.

The possible cause is corrupted elements in Revit. You can try to correct this issue and re-save the file by selecting the Audit option when opening the Revit project file.

To do this, open the project, check the audit option, select the name of the file you want to open, and then click the open button.

Characteristic. BIM empowers architects to better build their buildings before construction and after completion, giving them a competitive edge in today's increasingly complex business environment.

Autodesk Revit Architecture software is designed for Building Information Modeling.

BIM). BIM is an integrated process based on coordinated and reliable project information from design and construction to operation.

By employing BIM, architecture firms can use consistent information throughout the process to design and map innovative projects, and can also support better communication by accurately visualizing the building's appearance, simulating real-world performance to understand costs, schedules, and environmental impacts.

Summary. Dear Glad to answer for you: Revit Click to install the steps are as follows:

1. Double-click the installation file and select the empty directory to unzip it, release the folder size near open the runner, and start installing Revit2015. (You can choose the Chinese Simplified Chinese version or English version), and select "Install on this computer". 3. Then click "I Accept" and execute "Next".

5. Select the installation path Note: The directory must be all English characters! 6. Automatic installation, just wait patiently at this time!

Once the installation is complete, click "Done". The next step is activation. 7. Open the Revit2015 shortcut icon on the desktop, pop up the interface, and click "I agree".

Revit2018 installation point is not available.

I am glad to answer for you: Revit click to install the steps are as follows: 1. Double-click the installation file to select the vacant directory and unzip it, and open the running program after releasing the folder size to start installing Revit2015.

The table of contents must be all in English characters! 6. Automatic installation, just wait patiently at this time! Once the installation is complete, click "Done".

The next step is activation. 7. Open the Revit2015 shortcut icon on the desktop, pop up the interface, and click "I agree".

I can't install two words.

Then uninstall and reinstall to try.

I haven't installed it, how do I uninstall it?

Look at the picture I sent, it's just that the two words of installation are not lit.

Dear, you can check it on Zhihu.