A wireless router is set up with 2 wireless networks, how to remove one of them

Enter the router settings interface, 1. Set the end address pool in DHCP (the data is set to the same data as the starting address pool) and save it. 2. The second step, then set the IP and MAC physical IP binding, enter the IP and MAC address, and then enable, bind the checkbox, save, (method: open the traffic statistics to find the network IP you surf the Internet, similar to the IP address, there are 6 groups of numbers or letters that line is your MAC address, copy and record it in advance, you can also right-click on the Internet connection icon in the lower right corner of the computer --- the status, check and verify, you can also find the IP and MAC address, check the two), 3Finally, find the reboot button in the system tools in this settings interface to restart the router, or you can turn off the router for 10 seconds to restart).

In addition, it should be noted that such a setting can only allow the computer you just used to access the Internet, if you control the wireless network, the method is the same as above, just add 1 more to the address end pool, 100 becomes 101, and bind the IP and MAC of the wireless Internet machine, pay attention to identify clearly. FYI. Go for it.

Would it be nice to have more bounty points?

Open the browser, enter generally, or, (see your manual) enter the management and password, generally admin or useradmin, enter the setup wizard, and turn off one of the wireless network options.

Factory reset Reset.

Summary. Hello dear . I am a pleasure to serve you, I am your exclusive electronic answerer, Mr. Zou Zou.

The reason why a router will have three wifis may be because the router supports a three-band wireless signal, i.e. and 60GHz, so three different wifi signals will be generated. To delete a wifi, you first need to determine which kind of signal you delete the wifi, if it is or 5GHz, then enter the router management interface, find the wireless network settings, select the wifi you want to delete, click "disable", you can complete the deletion of wifi. If it is a 60GHz signal, it cannot be removed directly, but it needs to be removed by disabling the wireless network bridging and RF channel settings and then re-enabling it.

Why does a router have three wifis and how to remove one.

Hello, dear and dear . I am a pleasure to serve you, I am your exclusive electronic answerer, Mr. Zou Zou. The reason why a router will have three wifi may be because the router supports a three-band wireless signal, i.e. and 60GHz, so it will produce three different wifi signals.

To delete a wifi, you first need to determine which kind of signal you delete the wifi, if it is or 5GHz, then enter the router management interface, find the wireless network settings, select the wifi you want to delete, click "disable", you can complete the deletion of wifi. If it is a 60GHz signal, it cannot be deleted directly, but you need to disable the wireless network bridging and RF channel settings through Lula, and then re-enable it to remove this signal.

Dear, the wireless network is to cover the Yuxian communication equipment and terminals (that is, our mobile phones, computers, devices with WLAN function) do not need to be wired and destroyed, just like the network cable to connect to the computer to use the network. Wireless network is not required to connect the terminal with wire, but to use radio waves, microwaves and other media to make communication equipment and terminals wirelessly connected, so as to achieve the function of Internet access.

Summary. A router will usually offer two or three different WiFi networks, respectively and 5GHz bands. This is to allow users to choose different network connection methods to meet different needs.

If you want to delete a WiFi network, you can try the following steps: open a browser, enter the IP address of the router, and enter the router management page. Enter the administrator and password to log in to the router management page.

Find options such as "Wireless Settings" or "WiFi Settings" in the router management interface, and click to enter the WiFi settings page. In the WiFi settings page, you can find all the WiFi networks that have been turned on. Find the wifi network you want to delete and click the "Delete" or "Off" button.

Save the settings and restart the router for the new settings to take effect. Note: Deleting a WiFi network will cause all connections to this network to be disconnected, and if you have other devices connected to the network, those devices will need to reconnect to other available WiFi networks.

Why does a router have three wifis and how to remove one.

A router will usually offer two or three different WiFi networks, respectively and 5GHz bands. This is to allow users to choose different network connection methods to meet different needs. If you want to remove a wifi network, you can try the following steps:

Open a browser and enter the IP address of the router to enter the router management page. Enter the administrator and password to log in to the router management interface. Find options such as "Wireless Settings" or "WiFi Settings" in the router management interface, and click to enter the WiFi settings page.

In the WiFi settings page, you can find all the WiFi networks that have been turned on. Find the wifi network that needs to be deleted, and click the "Delete" or "Close" button. Save the settings and restart the router for the new settings to take effect.

Note: Deleting a WiFi network will cause all connections to this network to be disconnected, and if you have other devices connected to the network, those devices will need to reconnect to other available WiFi networks.

It's four, not three<>

No matter how many there are, the steps to delete are the same.

There are two ways for routers to connect: cascade and bridge.

1. Bridge: Two wireless routers are required.

The IP addresses of the two routers (i.e., the management IP) should be in the same network segment and not the same, if route A is, then route B is set to be set to, and the IP addresses must not conflict;

Set the channels (frequency bands) of the two routes to the same, preferably 6 or 9;

Router A does not need to enable the WDS (i.e. Bridge) bridging function, route B needs to be enabled, and click Scan to fill in the key type and key of route A.

DHCP must be enabled for route A, and DHCP must be disabled for route B.

Finally, restart route B.

2. Cascade: Put a network cable from router I to router II, router A is connected to the LAN port, and router B is connected to the WAN port;

The management IP addresses of the two routers cannot be on the same network segment. If Router I is, then Router II is changed to;

Router I turns on the DHCP service, and the WAN port of Router II is set to automatically obtain IP addresses.

Restart Route II.

Finally, regardless of method 1 or method 2, router A cannot be turned off, and dialing must be set in router A, and the dialing mode is autodialing.