There are two wireless routers how to set up a wireless repeater

Just right, the day before yesterday to the customer to implement the plan you mentioned, I used Tengda and Swift two wireless routers to do, the customer's situation is that broadband downstairs, originally thought, the second floor can receive the signal, but the pain is that the second floor is not even a little signal, can not help but say that Tengda routing garbage, but the second floor is separated by several floors, and it is in the corner. No signal is also reasonable. Okay, let's get down to business.

First use Tengda broadband access, which is no different from ordinary. To the second floor, method 1, you need to pull a network cable up, access fast, fast routing set static routing, fast routing network management, it is best not the same network segment so that when you enter the route, know to enter that, otherwise you will be stunned, and then the client, you can directly search for signals, fast, no problem. Method 2, using wireless AP and relay, this is more troublesome, requires some simple technology, and depends on whether the functions of the two routes match.

Method 2, I found that there will be no signal phenomenon during the test, which is not too frequent, but it does not feel stable. Is it caused by the incompatibility of the two?,This really hasn't been studied.,For the sake of business.,I'm still using method 1 to get it.。

Set your mini router to AP client mode, set the Tengda router to AP mode wirelessly, use the mini router to receive Tengda signal, and connect your computer with a network cable. Of course, if your mini router supports the wireless AP client function and also supports the AP, then your computer can access the Internet wirelessly. Tengda's relay with TP can see whether it supports WDS function first, and different brands may not be able to do WDS relay.

It's a bit cumbersome to make different brands. Especially now, TP's WDS is different from others.

Reply 14 What do you support, use the mini router as the ap, Tengda to connect, then I ask you, which one is used for the dial-up route.

Reply 4 How do I set it up to use it? Give a specific plan.

Tool: Wireless router.

The steps to set up the wireless bridging of a wireless router are as follows:

1. Enter the login router background management page in the browser (the login address of different brands of routers may be different);

2. Enter the login password;

3. Click to enter "Application Management";

4. Select "Wireless Bridge" in Application Management;

5. After entering the wireless bridge, click "Start Setup";

6. Wait for the router to scan the surrounding WiFi signal;

7. Select the main router WIFI in the WIFI that has been scanned;

8. Enter the wireless password of the main router and click "Next".

<>10. Set the wireless name and password of this router to the same as the main router to complete the wireless router bridging setting. Then set up the third router again in this way.

The wireless relay method of the two routers is shared.

OK.

1. How to set up the main router:

1. Plug the network cable (bus) into the WAN port of the wireless router, plug one end of the network cable into any LAN port of the wireless router and connect the computer network card at the other end, and turn on the power supply of the router.

3. Then enter admin, the default account name and password are the same (there is also a prompt for the original data on the back of the router) to confirm.

4. After entering the wireless router setting interface, select the Internet access method according to the setup wizard (different broadband options are also different), and enter the Internet access account and password.

5. Save and continue to set the wireless key, (it is recommended to use a combination of numbers and English for the password, and it is best to use the @ symbol in the middle, so as to prevent others from rubbing the net).

6. After saving, you can surf the Internet normally.

7. If it is abnormal, you may wish to click the reset button of the wireless router and set up the router again.

Second, the setting method of the secondary router:

1. Do not connect the secondary router to the main router first.

2. One end of the network cable is connected to any LAN port of the secondary router, and the other end is connected to the computer.

3. Change the LAN port IP of the login interface through the computer browser to avoid conflicts with the IP segment of the main router;

4. WAN port Internet access mode selection: dynamic IP connection, enable DHCP server.

5. Set the account and key wirelessly, save and log out.

6. Connect a network cable from any LAN port of the main router to the WAN port of the secondary wireless router, and the computer can access the Internet at this time.

Two routing noisy town set-up relay methods:

1. Prepare two wireless routers 1 and routers 2, use router 1 as the main device, use router 2 to bridge router 1, and use router 2 as a secondary router to raise the judgment.

2. The IP addresses of the two routers should be in the same network segment, and the channels of the two routers should be set to the same.

3. The main router does not need to turn on the WDS bridging function, the secondary router needs to be turned on and click Scan, fill in the key type and key of the main router, and the main router does not need to fill in if the password is not set.

4. DHCP should be enabled for the primary route, and DHCP should be turned off for the secondary route. Blending.

5. Finally, restart the route to complete the setting operation.

1. Enter the settings interface of the main router, then click [Running Status] in the left option bar, and you can find the DNS server in the WAN port status bar, there are two in total, the primary DNS and the alternative DNS server, record them.

2. Click [Network Parameters] - LAN Port Settings] to set the LAN address of the router to save, at this time, it will be restarted and then return to the settings interface and click [Wireless Settings] - Basic Settings.

3. Set the SSID to TP Link A. Set the wireless channel to: 11. Note: The WDS or Bridge feature must be turned off.

4. Click [Wireless Settings] - Wireless Security Settings, and select WPA-PSK as the encryption method, in this example, 12345678 as an example. Note: WPA WPA2 encryption is more secure and more stable to bridge than the old WE encryption, so WPA WPA2 encryption is recommended.

5. Click [DHCP Server] -- DHC Server Settings] and set [Address Pool Start Address] to; Set the End Address of the Address Pool to Click Save to restart the main router. The main router is set up.

Wireless repeaters, in a wide space environment, the coverage of the wireless signal is more important than bandwidth and speed. Undoubtedly, the use of repeaters to extend the coverage of the base station is the best option. In the network, the wireless repeater can be simply said to be a wireless AP.

AP stands for Access Point, which is the equivalent of a hub or switch in a wired network, but it is a hub with wireless signal transmission capabilities that provides a conversation meeting point for multiple wireless Internet devices.

Configuration of the router:

1.Enter " in the address bar, and then in the pop-up window, enter the default username: admin and password: admin 2, and in the WAN port settings, set the current Internet access mode, in this case, PPPoe dialing.

2.Set the basic wireless information, change the default SSID to AP1, enable the bridge function, and enter the wireless MAC address of AP2 in the box below.

3.The router keeps DHCP enabled.

Configuration of the router:

In the LAN port settings, change the LAN port IP address to , and then click Save.

The WAN port settings remain the default and unchanged.