How to solve the problem with the adapter wired network?

There may be a problem with the cable connecting to the computer, change the crystal plug.

If it is a broadband problem, please call the broadband customer service ** and ask them to check for you. If it is a router problem, please call the brand router customer service for **consultation, they have **guidance.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, from the new strict according to the manual settings can be used, I don't understand, it is not recommended to set it at will (this is under the premise of the correct physical connection, sometimes the router is slow or failed to find the IP address, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

win7810 restore the system, right-click on the computer to select the attributes, on the right side of the system protection, system restoration, follow the steps to do it, if there is restore software, the image backup that comes with it, and the backup, you can also use the software, image backup to restore the system.

Summary. Yes. You can open Device Manager, locate the network adapter, right-click and select Update Driver, or open the adapter manufacturer's Adapter and install the latest driver.

3.Reset the network: If the connection and drivers are normal, but you can't access the Internet, you can take some network reset measures, such as typing "ipconfig release", "ipconfig renew", "ipconfig flushdns", and so on in the command prompt, which can reset the network and fix the network problem.

4.Check your firewall and security software: Sometimes, your firewall and security software may also prevent your network adapter from working properly.

You can temporarily disable these security software and try to connect to the network, and if you can use the network, you will need to reconfigure the firewall and security software to ensure that it does not prevent the network adapter from functioning properly. It should be noted that if the problem cannot be solved, you can consider replacing the adapter or contacting the manufacturer for consultation. At the same time, it is recommended to regularly update the drivers of the network adapter to ensure its proper operation, and at the same time, you should also pay attention to network security issues and strengthen network protection measures.

If you're having trouble with the wired network adapter you're using, here are some things you can do to fix it:

Fellow, I really didn't understand, I can be more specific.

Yes. You can open Device Manager, find the network adapter, right-click and select "Talk about the new driver", or open the adapter manufacturer's license and install the latest driver. 3.

Reset the network: If the connection and drivers are laughing back to normal, but you can't get online, you can take some network reset actions, such as typing "ipconfig release", "ipconfig renew", "ipconfig flushdns", and so on in the command prompt, which can reset the network and fix the network problem. 4.

Check your firewall and security software: Sometimes, your firewall and security software may also prevent your network adapter from working properly. You can temporarily disable these security software and try to connect to the network, and if you can use the network, you will need to reconfigure the firewall and security software to ensure that it does not prevent the network adapter from functioning properly.

It should be noted that if the problem cannot be solved with a return, you can consider replacing the adapter or contacting the manufacturer for consultation. At the same time, it is recommended to regularly update the drivers of the network adapter to ensure its proper operation, and at the same time, you should also pay attention to network security issues and strengthen network protection measures.

Summary. Dear, how to solve the problem of the adapter wired network1Check whether the hardware switches of the computer's wireless network card are all turned on.

2.Check whether the wireless network card driver is installed normally, and sometimes you have to consider whether the power management software is still installed normally (whether it is installed or not, you can generally use the function key (fn) + wireless switch to build a hotkey (f) to press it to see if there is a response, and if you can't call the hotkey, you have to install the corresponding software). 3.

Make sure you can't get a signal or you can't find the signal you want.

Pro, how to solve the problem of the adapter wired Qingtan network 1Check whether the hardware switches of the computer's wireless network card are all turned on. 2.

Check whether the wireless network card driver is installed normally, and sometimes you have to consider whether the power management software is normal and installed (whether it is installed or not, you can generally use the function key (fn) + wireless switch to build a hotkey (f) to press it to see if there is a response to try, if you can't call the hotkey, you have to install the corresponding answer to the next tong software to start). 3.Make sure you can't get a signal or you can't find the signal you want.

If that doesn't work, you'll need to reinstall the system.

It says that the adapter is having a problem with the wired network.

I've reinstalled the system.

Kiss, can you take a picture for me.

I'm good at analyzing.

There's no place to take pictures here.

Delete it after asking. You click on this plus sign to shoot, dear.

Apple doesn't. Dear, I'm an iPhone, so there will still be.

1.Check whether the network connection is normal: Check whether there is a problem with the wired network line, check whether the network card is correctly inserted into the wired network, and check whether the power supply of the wired network line is correctly connected.

2.Check the drivers for the network adapter: Check that the operating system has installed the drivers for the network adapter correctly, and if not, follow the adapter's instructions to install the drivers.

3.Check if the network is valid: Run the network connection viewer to check if the network card shows that it is connected to the network, if there is a network card status is disconnected or unavailable, please restart the machine.

5.Reinstall the system: If you can't check the cause of the problem before solving the problem, it is recommended to reinstall the system.

If you're having trouble with your wired network adapter, try the following steps:1Check that the computer and router are properly connected; 2.

Check whether the wired network adapter is properly connected to the computer and plug it in again. 3.Check whether the network code adapter bridge bucket matcher is turned on and whether the latest driver is installed; 4.Try replacing the network adapter; 5.

It depends on whether the problem is a hardware problem or a software problem.

1. If it is a software reason.

That is to say, if the driver file of the network card is lost or damaged, you can reinstall the network card driver.

2. If it is hardware damage.

That is, the network card or network card chip is damaged. If the NIC damage does not affect the system startup, you can uninstall the driver of the original NIC and then shield the damaged NIC (integrated NIC. If it is an independent NIC, you can remove it), and then install an independent NIC on the PCI slot, and install the driver before you can continue to use it.