What is stable, I have the same configuration as my classmates, but my CPU temperature is 7 or 6 deg

The temperature of the CPU is constantly changing, and it may be that your CPU usage is higher than that of your classmates

Or if you're compressing a file and your classmates are on standby, if you're too worried about the temperature, it's recommended that you switch to a better fan or don't overclock it

It is normal that the uneven application of silicone, the accumulation of excessive dust in the heat sink, and the slowing down of the speed caused by the dust in the fan may increase the temperature.

Just because the configuration is the same doesn't mean that the temperature is the same. It also depends on factors such as the running program, the contact between the CPU and the fan, the location of the machine, etc.

My machine also has a problem.,It's exactly the same configuration as the classmates on the edge of the dormitory.,But my was once as high as 80.。。。 Her maximum is 70 ...

Both of us may have problems with our machines.

Later, I dismantled my machine, and the result was that the contact between the CPU and the fan was not good, and the heat dissipation silicone was too little.

Now my machine has been around 50 degrees... It's normal.

I cpu yes.

There could be two reasons.

1 The fan is too dusty.

2 Problems with the software.

For example, there are too many programs loaded on the boot, and the CPU usage caused by viruses is too high.

The cooling system may not be the same. The materials of computers are different.

The quality of CPU and CPU is not the same, they are all normal people, and there are tall and short.

There are probably two reasons:1The problem with the fan may be that the fan is not installed properly;

2.There is some software running in the background.

1. The ambient temperature is too high.

Second, there are too many running programs.

3. The fan does not run well and there is too little heat dissipation silicone.

4. The data traffic is too high due to CPU overclocking.

Fifth, machine poisoning.

Is your system exactly the same? What's inside is exactly the same? Hehe.

Hello CPU temperature is generally stable in the range of 20-30 degrees above the ambient temperature.

If the CPU temperature is too high, the following checks should be done:

1. Check if the CPU fan is still rotating, or check whether it is still rotating at the normal speed, because sometimes, when the fan is aging, it will not work properly, resulting in insufficient wind pressure of the heat sink, which will cause poor heat dissipation and too high temperature. Solution: Replace the fan on the heatsink.

2. If the fan is running normally, check whether the heat sink and the CPU fit tightly, and try to replace the thermal grease between them, which can have a certain heat dissipation effect.

3. If the heat sink has limited heat dissipation effect, you can consider replacing the whole CPU cooling system of the heat sink (including the fan). It is best to choose one with copper pillars, or heat pipes, so that the effect is more obvious.

4. Try to install an air duct to the CPU radiator part, and the current new chassis is basically bringed. If it is an old machine, you can buy one and install it yourself.

5. If the overall temperature of the computer is too high, try to improve the air duct, such as CPU fan dust and internal dust of the case; Air intake at the front and exhaust at the rear to speed up internal air circulation.

6. Check whether the power supply is stable, and whether there are some uneven or too high voltages, which can easily make the CPU heat up or even burn the CPU. Add a voltage regulator.

Is it the highest? It's still as soon as it's turned on, and if it's the highest, it doesn't matter, it's normal. If it is 60 degrees as soon as it is turned on, then you have to check the fan and clean the dust.

Some high recommendations clean up the CPU fan dust and the dust inside the case.

If the normal standby situation is 67 degrees, you should consider whether the CPU cooling fan is working normally, whether the silica gel on the contact surface between the fan and the CPU is dry and cracked, if you only have such a temperature when playing games, depending on the situation, the high-power CPU should be normal, if you need to reduce the CPU temperature, you can consider changing the CPU heat pipe radiator, CPU tower radiator, and then the water cooling of enthusiasts.

Temperatures below 80 degrees are considered normal, so don't worry. AMD's CPU is often seventy or eighty degrees, and I haven't seen any damage in five or six years.

38 degrees is a bit of a.,Now the room temperature in summer is 30 degrees.,The CPU itself is also heating.,4 50 degrees must be there.,As for how much to keep it, it depends on what you do for it.,If you're on standby above 50 degrees, it's definitely not good.,If you're playing games or running large programs, the temperature is 67 degrees Celsius is acceptable.,No matter how high it is, you need to pay attention.。

If you need to strengthen the heat dissipation of the fan, then replace the heat dissipation silicone, clean the fan dust, and increase the fan speed.

My computer also has a lot of temperatures, this one is a bit on the high side, and you can use a radiator to cool it down.

The CPU temperature is generally around 30 degrees Celsius 70 degrees, if the no-load temperature reaches 67 degrees, this is abnormal, and there may be the following reasons:

1. The internal silicone grease of the CPU has expired, resulting in the heat of its CPU core cannot be transmitted to the outside in time, and the lid needs to be opened to replace the silicone grease.

2. The CPU radiator has low performance, which causes its heat to be unable to be sent away in time, and can only be replaced with a better radiator.

3. The thermal grease material of the CPU is not good, resulting in its heat cannot be transmitted to the heat sink in time, it is recommended to replace it with better silicone grease.

38 degrees is the best, use a fan, or turn on the air conditioner.

1.Clean up the fan dust 2Wipe thermal conductive glue, 3Replace the heatsink and fan.

If there is no problem in use, it is normal, usually the software test is not very accurate, he tests the temperature generated by the CPU, not the temperature after the heat dissipation fan, the general computer motherboard has intelligent temperature control protection, and the motherboard will automatically power off if the temperature is too high.

If the temperature is a little higher, check whether the CPU fan is working properly, if it is working normally, check whether the CPU radiator fastener is installed firmly.

The temperature is a bit high, and the temperature at which the CPU works normally is about 30 degrees to 40 degrees. However, when the system has large resources, the temperature is likely to reach 69 degrees, as long as it is not kept at 69 degrees for a long time, it will be fine.

The power consumption of 8450 is not low, and the temperature is normal when playing games.

The temperature is a bit high, as long as the CPU fan is removed, the ash is removed, and the silicone is on it, and the high temperature has nothing to do with the speed, but it depends on the temperature of the fan with more than 1000 revolutions.

How long have you been buying your computer? Is it a brand or a DIY?Has the CPU ever been turned on? Whether it is 69 degrees when running too many programs. Has it stayed in this range all the time?

4000 rpm is basically considered high.

Second, open the task manager to check the performance. See if the U is frequently used, and only continuous load can make the temperature of the U not come down.

It is recommended that you go to customer service to clean up the dust.

It is not normal, it is recommended to check the cooling system.

Check if there is a virus occupying the CPU, and if not, check whether the CPU fan is normal.

As long as the CPU temperature does not break 90, there is no pressure, you can use it with confidence!

The problem is big, 1Graphics card,C61G chip is GeForce6100 series,If your display is not onboard,Then a 6150 is 0 effect。

The processing power of the motherboard is very low, it is not equipped with 5200+, and it is not used with 5200+, and it is enough to use an athlon 3200+ for this board.

Or choose to upgrade the motherboard, at least MCP68 above the chipset 3, your configuration of the motherboard is the bottleneck, hoping that the temperature will not be smooth to 90 degrees, and it will not be able to play the charm of 5200+, it is recommended to replace it to 785 or the current mainstream 880, and the second-hand market, at least with a 690G level.

If you need second-hand motherboard information, I can introduce trusted merchants to you.

This machine is quite old. CPU56 degrees is quite normal.

If the case air duct has not improved, then it is recommended that you replace the CPU cooling fan.

...Fan problem, it has nothing to do with the usage rate, find a repair computer to remove the dust, you can do it yourself, the fan doesn't work and change it.

Change to a fan with a large air volume and do a good job of cooling the computer.

It's not a big problem if it's not 80 degrees.

After a long time, this temperature is also normal, and the heat dissipation capacity of different notebooks varies greatly, as long as it does not exceed 75°, there is no problem.