What kind of floor material is good for floor heating?

The special floor heating floor must meet strict requirements: the density of the substrate should be high, the internal bonding strength should be good, and the expansion rate of the water absorption thickness should be less than or equal to the thickness of the water to ensure that it will not crack or deform at high temperature for a long time; In addition, the formaldehyde emission should be low, because the higher the temperature, the more formaldehyde is released, especially in the winter in a relatively closed room, which is more likely to exceed the standard.

Now there are many types of flooring on the market, including solid wood flooring, laminate flooring, etc., generally speaking, composite flooring is more suitable for floor heating flooring. Because the standard thickness of the floor heating floor is, the thickness of the composite floor is mostly 6 9mm, of which the laminate floor is mostly 6 8mm, and the three-layer solid wood parquet is 8 9mm, the heat transfer performance is better, and there is a layer of aluminum oxide wear-resistant layer on its surface, which is conducive to the rapid diffusion of heat on the surface.

First, the dimensional stability should be good: this point depends on the density of the substrate and the internal bonding strength of the floor, the higher the internal bonding strength, the better the ability of the floor to withstand temperature changes, and the phenomenon of cracking will not occur, only the floor with relatively dense wood can ensure that it does not crack and deform at high temperature for a long time. 2. Not afraid of humid environment:

That is, the expansion rate of the water absorption thickness. The floor used for radiant heating of the hydrothermal floor requires little dimensional change and the expansion rate to be less than or equal to the expansion rate in the high humidity state. In general, the smaller the expansion rate, the better the moisture resistance of the floor.

3. Fast heat transfer: At present, there are not many brands on the market that can provide thermal conductivity, and consumers should pay attention to it when purchasing. In general, products with high coefficient perform better in terms of thermal conductivity.

Fourth, not afraid of high temperature: because the geothermal floor has to withstand high temperature heating of about 30 degrees for a long time, the performance of the product decorative layer is required to be stable, and there will be no fading and rough light under the condition of high temperature for a long time.

There are many types of flooring on the market, especially after installing underfloor heating, we will face difficulties in choosing flooring. At present, the most common floors on the market are solid wood flooring and parquet flooring, and below, we will introduce you to what these two types of flooring have.

1. Solid wood flooring

Oak

The surface of oak wood has a good touch, the structure is firm and reliable, can be made into various surface lines, and has a long service life. Oak has a distinct mountain wood grain to:

The price of oak as the base material of floor heating solid wood flooring is generally not too high, and it is more suitable for Nordic or modern home decoration, which is deeply loved by the younger generation of consumer groups.

Longan

The appearance is smooth, the texture is clear, and the corrosion resistance structure is uniform. There are two types of longan on the market: golden and reddish-brown. Longan flooring is more suitable for European or Chinese style home decoration, and it is also moderate.

Eggplant wood

The surface is glossy, the structure is uniform, there is no special smell, the stability is increased, and the corrosion resistance is added. It is suitable for Chinese or European style home decoration decoration, but due to the print.

Eggplant itself is a relatively rare wood species, so eggplant solid wood flooring** is more expensive than oak**.

Teak

Teak is known as the "king of ten thousand trees", when the domestic precious wood species, the stability of the floor made of teak is particularly good, the internal oil content is also very heavy, the oil spots on the surface of the floor will slowly fade with the extension of time and become more beautiful and good-looking, not only that, teak floor heating solid wood floor also has the characteristics of moisture-proof and insect-proof. Therefore, teak flooring is the best and most expensive of these types of underfloor heating flooring.

Second, parquet

There are three types of common parquet on the market, namely parquet, laminate flooring, and multi-layer laminate flooring.

Parquet

Solid wood parquet has the advantages of beautiful and natural, comfortable foot feeling and good thermal insulation of solid wood flooring, and has the shortcomings of customer service solid wood flooring due to the shrinkage of the monomer and easy to warp. Hardwood parquet is divided into three categories: three-layer solid wood composite four classes, multi-layer solid wood parquet, and parquet, and the furniture decoration is the most.

Commonly used is three-layer parquet. Moreover, the parquet does not need to be keeled, but the ground needs to be chiseled.

Laminate flooring

The hardness is high, the wear resistance is good, the paving is simple, convenient, and the ** is low, but the foot feeling is slightly worse.

Multi-layer parquet

Multi-layer parquet is improved on parquet, and in the case of its own and parquet advantages, the hardness and wear resistance have been improved, and it has excellent performance in public places, geothermal and humid environments, and is gradually used in many modern places.

You can choose wooden floors, which have better thermal insulation, so that the floor heating can play a role, so that the room will be particularly warm, and the wooden floors are more suitable.

You can choose solid wood flooring, you can get a particularly good feeling, in life can also achieve warm in winter and cool in summer, and it is also very suitable for floor heating. It also looks particularly aesthetically pleasing.

Wooden flooring is an option. In this way, the overall home decoration style can be more lofty, and it is also very durable and very strong.

You can choose solid wood flooring, because this flooring looks very natural and can be warm in winter and cool in summer.

Installing a floor heating system can make the whole room warmer and more comfortable, but if you don't choose the right floor material, it is not only easy to reduce the use of floor heating, but also may cause damage to the floor, resulting in a shorter service life. So, what material is suitable for floor heating? How to choose underfloor heating?

Let's take a brief look at it together.

1. What material is suitable for floor heating?

After the installation of the floor heating system, it is suitable for the use of composite wood flooring, solid wood floor heating floor and laminate flooring, of which laminate flooring is more popular, whether in terms of performance, but also in terms of color and texture, it will be better than the other two, but the formaldehyde content of laminate flooring is relatively high, so after decoration, pay attention to ventilation before moving in.

Second, how to choose floor heating.

1. Pay attention to the size of the floor.

When the floor heating is used, the floor will be in a high temperature environment for a long time, so when choosing the floor, not only need to choose stable performance, but also its shape and size, thickness also need to be carefully considered, especially the thickness, in order to reduce the loss of heat energy in operation, we must follow the principle of choosing thin and not thick, and choose the right floor heating floor.

2. Pay attention to environmental performance.

When choosing a floor heating floor, we should pay special attention to the quality of environmental protection, because if you choose a floor with poor environmental performance, it will emit a large amount of formaldehyde after decoration, which is very harmful to the health of residents.

Summary: When choosing a floor heating floor, it is necessary to take into account not only the size and thickness of the floor, but also the performance, it is recommended that it is best to choose a brand floor. The above about what material is suitable for floor heating and how to choose floor heating floor is introduced here, I hope it will help you.

Floor heating has become a new type of heating with many advantages such as economic and environmental protection, cleanliness and hygiene, and space saving. Underfloor heating pipes are hidden under the ground, so be sure to ensure ***. When installing underfloor heating, the construction team will use a lot of materials, and most owners do not know what materials are needed to install underfloor heating.

The following is a brief explanation of which material is good for floor heating, I hope it can help you.

1. Marble.

Marble is a natural stone, its thermal conductivity is not good, and the texture of marble is naturally formed, without deliberately designing can also be very beautiful, it looks very high-grade. The heat resistance, water resistance and wear resistance of marble are not comparable to other floor heating floor materials, and the general high temperature and humid environment will not cause problems unless the ground is artificially damaged.

Second, ceramic tiles. Generally, the floor material selection of floor heating is ceramic tile, because the ceramic tile is general, the performance is relatively good, its hardness is better than other materials, and its heat transfer is better. The water absorption rate of ceramic tiles is also very low, and the bucket pure water absorption will not be deformed by the rubber grille, and there will be no mold, corrosion, deformation for a long time, and the tiles have no toxic gases.

3. Wooden flooring.

Wooden flooring has a very strong sense of comfort, it fits the human body relatively well, and it will feel very soft when you step on it. And the texture of the wooden floor is very beautiful, which is very suitable for decoration. However, the wooden floor is prone to moisture, and if it is damaged and not repaired, it will crack and arch.

Although wooden floors are more environmentally friendly and comfortable, they are not recommended to be used as floor heating, and it is highly recommended for rooms that do not use floor heating.

With the increasing awareness of professional underfloor heating units, many home users will choose to install professional heating systems in their homes for home heating. The living room, dining room, high room and study are all professionally heated underfloors. Cold winter.

So what kind of floor materials are recommended for professional floor heating installation?

1. Tiles

When choosing underfloor heating materials for professional underfloor heating installations, the preferred material is ceramic tiles. The hardness of ceramic tiles is better than other materials, and due to the material, good heat dissipation performance can increase the indoor temperature in a short time after the professional heating device is turned on, without worrying about moisture and heat. After this, it can cause ground problems such as deformation and lifting, and there is no need to worry about the tiles releasing harmful gases or radioactive materials when heated, which is easy to clean and environmentally friendly.

2. Laminate flooring

In addition to ceramic tiles, laminate flooring is another popular material for flooring for professional underfloor installations.

Bare feet feel softer on wood floors due to the higher fit and foot comfort of laminate flooring. Insulation is much better than tile. When the same temperature is reached and professional underfloor heating units are turned off, wooden floors can keep the inside warm for a long time.

3. Marble

Of all the professional materials for the installation of professional underfloor heating, marble is the more expensive. Marble heads are metamorphic rocks formed by the high temperatures and pressures of the original rocks in the earth's crust. It originally referred to the white-black limestone produced by Dali in Yunnan.

This outline can be formed into a natural ink landscape painting. The limestone used as a decorative material for friendly nuclear buildings is collectively referred to as "marble". If it's a professional underfloor heating installation, consider using marble as your flooring material.

The thermal conductivity of marble is better, and the thermal insulation performance is slightly better than that of ceramic tiles. Natural marble heads have a natural texture and are a unique home décor that looks very good. At the same time, the heat resistance, water resistance and wear resistance of marble are more obvious than other floor materials.

Don't worry about all sorts of ground problems caused by moisture. If it is not deliberately damaged, there will be no scratches on the surface of the marble.

The above are some introductions to professional floor heating installation materials, I hope it helps.

You can get it for free

1. Look at the main material, the first thing to look at the low temperature hot water floor heating is the pipe, PERT pipe and PB pipe are the world's first recommended floor heating pipeline system, the anti-permeable oxygen pipeline avoids the corrosion of oxygen on the metal parts of the floor heating system, prolongs the service life of the pipeline and the system, and also avoids the damage to the normal operation of the system after scaling in the pipeline.

2. The use of intelligent thermostats for intelligent temperature control or other auxiliary devices can improve the comfort of floor heating and effectively reduce energy consumption. It is also recommended to have a secondary water mixing device, which can: one is to directly reduce energy consumption, the other is to protect the pipeline from excessive water temperature, and protect the life of the floor and furniture in the later stage.

3. Installation design, design is a good construction foundation, whether the design is reasonable or not is directly related to and affects its use effect, ground cracking and a series of problems, will also affect the smooth and quality level of other work. The design of the underfloor heating system should be carefully calculated and carefully studied.

4. Look at the thermal insulation, the high-density and high-strength ground insulation materials can not only minimize the downward loss of heat, but also avoid the aging of thermal insulation materials under long-term use, the ground materials should first be selected more than 2 cm of extruded insulation board, if you choose polystyrene foam board, the density should not be less than 30kg m3. In addition, it is very important that the insulation board should be fuel-resistant. There must be an aluminum foil film on the insulation board, which not only reflects the heat, but also plays a safe role in protecting the local overheating of the heating pipe.

Also, be sure to have corner insulation and expansion seams in large areas!

5. Look at the commitment of technical support and after-sales service, the procurement of heating system should not only pay attention to good products, but also pay attention to good support and lasting and stable after-sales service behind the products. The best supplier of the floor heating system should provide a complete construction paper and material details to reassure the customer. Pay attention to the free warranty period of your products, and you can see more added value behind the products.