GAC Trumpchi GS4 cruise speed control rules

<> rules and instructions for use say that there is no can only say a rough speed to the speed that needs to be controlled, press the cruise button, you can let go of the throttle, there is an electronic throttle to automatically control the speed, step on the brake to cancel the speed (cruise press the cruise button, the speed of more than 40 kilometers per hour can be fixed, when you reach the speed you want to sail, press the minus button, you will sail, to accelerate on the long press the plus button will speed up, when you step on the brake and press the plus key will increase the speed to the original fixed speed, Press the minus key to reduce the naming speed, in general, the plus key function is the naming reply, the naming speed, the minus key function is the naming and deceleration).

cruise (on and off).

set minus sign (constant speed deceleration setting).

res plus (acceleration setting resume cruise).

cancel (pause cruise).

Turn on cruise and speed control:

Press Cruise first to turn on the cruise function, the dashboard will light up the white cruise light, when the speed of the car is increased to the cruise speed you need (above 40km h), press the set minus button, the cruise light on the dashboard turns green to set the speed, release the throttle and drive at the set speed.

Reduce cruise speed:

In the cruising state, press the set cruise speed again each time to reduce the speed, hold down the set, and the cruise speed continues to decrease.

Increase cruise speed:

In the cruising state, press the res cruise speed again each time to increase the speed, hold down the res and keep going, and the cruise speed continues to increase.

Acceleration overtaking: In the cruising state, you need to accelerate to overtake and step on the accelerator directly, and release the accelerator after overtaking, it will slowly slow down to the set cruising speed and continue cruising. (If the acceleration speed is higher than the cruise speed for 5 minutes, the cruise will be automatically canceled).

Pause Resume cruise:

Hit the brakes or press cancel to temporarily stop the cruise, at this time the cruise light changes from green to white, at a speed not less than 40km h, press res to continue to cruise at the previous speed, when the speed is less than 40km h, the stored speed disappears, and the previous cruise speed can no longer be restored. (It should be noted that pressing res to resume the previous cruising speed is a rapid acceleration process, if the current speed is very low, it is best to use caution, and press set to start the cruise when the throttle accelerates to the appropriate speed).

Turn off the cruise: Press cruise to turn off the cruise and the cruise light is off. (Avoid the cruise system malfunctioning, when you don't need the cruise function, please turn off the cruise completely, not temporarily stop the cruise) If it helps.

GAC Trumpchi GS4 cruise speed control rules are:

1. Turn on cruise and speed control.

2. Reduce the cruising speed.

3. Increase cruise speed.

4. Accelerate and overtake.

5. Pause and resume cruise.

6. Turn off the cruise.

Detailed explanation of the Terms of Use:

1.Turn on cruise and speed control:

Press Cruise first to turn on the cruise function, the dashboard will light up the white cruise light, when the speed of the car is increased to the cruise speed you need (above 40km h), press the set minus button, the cruise light on the dashboard turns green to set the speed, release the throttle and drive at the set speed.

2.Reduce cruise speed:

In the cruising state, press the set cruise speed again each time to reduce the speed, hold down the set, and the cruise speed continues to decrease.

3.Increase cruise speed:

In the cruising state, press the res cruise speed again each time to increase the speed, hold down the res and keep going, and the cruise speed continues to increase.

4.Acceleration overtaking:

In the cruising state, you need to accelerate to overtake and step on the accelerator directly, and release the accelerator after overtaking, it will slowly slow down to the set cruising speed and continue cruising.

5.Pause Resume cruise:

Hit the brakes or press cancel to temporarily stop the cruise, at this time the cruise light changes from green to white, at a speed not less than 40km h, press res to continue to cruise at the previous speed, when the speed is less than 40km h, the stored speed disappears, and the previous cruise speed can no longer be restored.

6.Turn off cruise:

Press cruise to turn off the cruise and the cruise light is off.

Hello friends! The cruise use of the Trumpchi GS4 is to press the cruise button and the speed is more than 40 kilometers per hour before it can be used. Then step on the throttle and see the cruise button on the dashboard turn green after accelerating to the speed you need to release the throttle.

It can be used, when you step on the accelerator or clutch, the cruise function disappears automatically. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, you can drive at a speed of more than 25kmh, and you can lift it when you step on the brakes.

I hope mine is helpful to you, thank you, have a nice ride! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Press Cruise first to turn on the cruise function, the dashboard will light up the white cruise light, when the speed is increased to the cruise speed you need (40km h to the shirt as above), press the SET minus button, the dashboard cruise light turns green to set the speed, release the accelerator and drive at the set speed.

The Trumpchi GS4 cruise switch is in the functional area on the right side of the steering wheel, and the keys are used as follows; cruise (on and off).set minus sign (constant speed deceleration setting).res plus (acceleration setting resume cruise).cancel (pause cruise).

Pause to resume cruise: step on the brakes or press cancel to temporarily stop cruising, at this time the cruise light changes from green to white, which start at a speed of not less than 40km h, press res to continue to cruise at the previous speed, when the speed is less than 40km h, the stored speed disappears, and the previous cruising speed can not be restored. (It should be noted that pressing res to resume the previous cruising speed is a rapid acceleration process, if the current speed is very low, it is best to use caution, and press set to start the cruise when the throttle accelerates to the appropriate speed).

Turn off the cruise: Press cruise to turn off the cruise and the cruise light is off. (Avoid the cruise system malfunctioning, when you don't need the cruise function, please turn off the cruise completely, not stop the cruise temporarily).

Press the fixed speed start button first, then press the minus sign, and the dashboard will display a white symbol. When the constant speed is successful, the constant speed can be increased or decreased by pressing the plus or minus keys. Then, press the plus key to resume the current speed and press the start key to exit the cruise.

Keep in mind that constant speed cruise can only be used at speeds above 40 km/h.

The Trumpchi GS4 cruise control switch is located in the functional area on the right side of the steering wheel, and the buttons are used as follows

Cruise (cruise on), set minus sign (constant speed deceleration setting), res plus sign (acceleration setting resume cruise), cancel (pause cruise).

Open cruising and constant speed:

First, press Cruise to turn on the cruise function, and the dashboard will light up with a white cruise light. When the speed increases to your desired cruising speed (more than 40 km/h), press the SET minus button and the cruise light on the dashboard will turn green to set the speed. After releasing the throttle, drive at the set speed.

Reduce cruise speed: In the cruising state, press the SET cruise speed again, reduce the speed every time you turn slowly, and hold the SET, the cruise speed will continue to decrease.

Increase cruise speed: In the cruising state, press the res cruise speed again, each time you increase the speed, press and hold the res, and the cruising speed will continue to increase.

Acceleration overtaking: In the cruising state, you need to accelerate to overtake and step on the accelerator directly. After overtaking, you will slowly slow down to the set cruising speed and continue cruising. (If the acceleration speed is 5 minutes higher than the cruise speed, the cruise will be automatically canceled).

Pause Resume cruise: Temporarily stop the cruise by pressing the brakes or press cancel. At this point, the cruise light changes from green to white.

When the speed of the vehicle is not less than 40 km h, press the res to continue cruising at the previous speed. When the speed of the vehicle is below 40 km/h, the stored speed disappears and the previous cruising speed cannot be restored. (It's important to note that the cruise speed before resuming by res is a rapid acceleration process.)

If the current speed is low, it is best to use it sparingly. When the throttle increases the speed to the speed of the Embedding Acer, you can press the setting to start the cruise again. )

Turn off the cruise: Press the cruise to turn off the cruise, and the cruise light turns off. (To avoid cruise system failures, turn off the cruise completely when you don't need the cruise function, instead of temporarily stopping the cruise).

Millions of car purchase subsidies.

Press the key (cruise) on the upper left side of the steering wheel, that is, the "cruise constant speed on/off" button, display a green "cruise constant speed mark" on the dashboard, and then press the key (set-) on the lower right side of the steering wheel to start cruising, and then the dashboard displays the current cruise speed.

The appearance of the new Trumpchi GS4 has been significantly upgraded, which is more in line with the aesthetic concept of urban young people, and the most obvious changes are the headlight cluster and LED daytime running lights. **The side of the Trumpchi GS4 has not been greatly adjusted, but the waistline has been re-modified, which is more powerful than the old model.

The all-new Trumpchi GS4 is equipped with a turbocharged engine with a maximum power of 152 PS and a maximum torque of 235 Nm, mated to a 6-speed manual or 7-speed dual-clutch transmission. This engine has a dual variable timing system for intake and exhaust Changsui, a variable oil pump, a dual-mass flywheel and a GCCS combustion chamber control system with Trumpchi's independent specialized front Xunhaili technology, which has reached the level of domestic main silver sail flow in terms of technology.

Millions of car purchase subsidies.

Summary. Hello dear, the fixed speed cruise of the GAC Trumpchi GS4 2017 model is used as follows: 1. When the vehicle reaches the speed you want to maintain, press the "Cruise" button on the dashboard.

At this point, the "cruise" indicator on the dashboard will illuminate to indicate that the cruise has started. 2 If you need to increase or decrease your cruise speed, use the "+" and "-" buttons on the steering wheel to adjust. These buttons are usually located on the left or right side of the steering wheel.

Hello split family, the GAC Trumpchi GS4 2017 model model speed cruise control use method is as follows: 1 When the vehicle is driving to the speed you want to maintain, press the "cruise" button on the dashboard. At this point, the "cruise" indicator on the dashboard will illuminate to indicate that the cruise has started.

2 If you need to increase or decrease your cruise speed, use the "+" and "-" buttons on the steering wheel to adjust. These buttons are usually located on the left or right side of the steering wheel.

Hello dear, to exit cruise control mode, press any of the brake or clutch pedals, or press the "Cancel" button on the steering wheel. At this point, the "cruise" indicator will turn off, indicating that the cruise has stopped. Please note that cruise control can only be used with a group member with a steady speed, and is not suitable for driving in urban traffic jams or complex road conditions.

Also, when using cruise control, always be aware of road and traffic conditions and maintain control of your vehicle.

Summary. Hello dear, 3If you need to adjust the cruise speed, you can use the "+" and "-" buttons on the steering wheel to adjust it. 4 If you need to cancel the cruise, you can press the brake pedal or press the cancel button on the steering wheel.

It should be noted that cruise control is only suitable for use on relatively straight roads with stable traffic such as highways. When used in other road conditions, it is necessary to be alert and adjust the speed according to the actual situation.

Hello dear, the steps for Trumpchi GS4 to turn on cruise control are as follows: 1. During driving, accelerate the grinding rock tomato to the speed that the vehicle needs to maintain, and maintain stability. 2. Find the cruise control button on the steering wheel of Zaoqing, generally on the left or right side of the steering wheel.

3Press the cruise control button, and the vehicle will automatically maintain the current speed.

3. If you need to adjust the speed of the return cruise, you can use the "+" and "-" buttons on the steering wheel to adjust. 4. If you need to cancel the cruise, you can press the brake hand pedal or press the cancel button on the directional leaky disc. It should be noted that cruise control is only suitable for use on relatively straight roads with stable traffic such as highways.

When used in other road conditions, it is necessary to be alert and adjust the speed according to the actual situation.

This kind of thing. Manual transmission.

Hello dear, did you see the second icon above, that is.