There is no driver for the main version, and the machine is very stuck, who can help me provide a ma

First of all, after looking at the results of your CPU-Z detection, I determined that yours is an 865 series motherboard, and now you need to do the following two things:

1.Open the case and look at the manufacturer of the motherboard (it is basically written between the motherboard, CPU and memory).

2.Use the official ** of the manufacturer to find the corresponding driver.

Here are a few drivers for your reference:

Manufacturer: Top Star.

Elite Phoenix Technologies, Ltd you provide is not the brand of the motherboard, you have to open the case to see, or you take the motherboard with a camera to take a picture and send it down, I will help you see it.

It is best to know the model of the motherboard you are using, so that you are in the driving home.

Find the driver of the corresponding motherboard model.,Find it yourself.,Go to the driver home to find Intel's 865 motherboard driver.

Will you look at the model?,Look at the list when you buy the board.,Or there's also on the motherboard.,After seeing the model, you can go directly to the Internet to search for this kind of driver.。 You try to find out. It's a bit of a hassle, but that's the way it can be!

The SF card is driven, and it is in the card, so you don't need to install it. That's why 4G cards only.

After changing the motherboard, you must reinstall the system, even if it is the same model, it is recommended to reinstall it again, because the port configuration and driver of the original motherboard are all retained, so that after booting, it is equivalent to loading the information of 2 motherboards, resulting in a lack of system resources, which of course will become a card.

1 It may be that the BIOS is not set up properly, or you have not turned on the L2 cache.

2 After replacing the motherboard, have you ever done the system from the system? It's not a repair, it's a reinstallation.

What is the main version, all explain 1 point to help you see

To flash the machine, you must first back up the memory card and then format it, otherwise you will have such a problem.

If you back up, try to format the memory card and then try to start it anew, generally I don't recommend flashing a root, once rooted, the hardware and software functions of the fuselage are not compatible, because now many mobile phones are Unicom or mobile company customized version, once flashed, the system is unstable and easy to fail.

The driver is in the phone, and it has nothing to do with the memory card, try to restore the phone to factory settings after backing it up.

It could be that the printer's driver and some software program in your computer are at odds. In"Run""sfc /scannow"You can check if your computer has a big problem.

Don't kneel, the man is ** under his knees.

The problem is that the phone's cache has already run the installer of the 360 assistant, and it will stop when it is loaded again, the phone's RAM is small, the conversion space is limited, and the running program cannot be exited.

After restarting your phone, clear all programs in the cache, restart it, and reinstall it.

Write it stroke by stroke, you have to oh. After that, explain in detail.

Take a look at how much RAM you have left on your phone.

I advise you to change your thumb to play with the pea pod, and use both together. Much easier to use than 360.

I rarely use 360's mobile phone assistant, you can QQ Butler mobile assistant.

Uninstall it and try it again.

Try to change it with a data cable, the interface may be worn.

No, because the driver will only be activated when the mobile device (mobile phone) needs to read! If your phone is not plugged into the computer, it will not affect the speed.

360 software management, if it doesn't work, one-click restore.

Insert the SD card and see if the system prompts you to install the driver. Or if my computer has a new drive letter popping up. Drive the words of the drive sprite.

If the drive is fine, but there is no response, maybe the internal cable is not connected or loose, or it is broken.