How do I make a boot disk?

Generally refers to floppy disks for DOS.

Now there are also discs that can be used without an operating system.

Do some low-level operations on the computer.

What kind of startup disk is it.

There are 98's and 2000's.

Insert the floppy disk, click the icon - right-click - menu to select Format, select the Make Startup Disk checkbox in the format dialog box, click OK, OK.

3. Install the software: Double-click to open the software, select the installation and storage path, click to agree to the agreement, and then wait for the installation to complete.

4. Then find the software on the desktop, click to open, insert the USB flash drive into the computer, and the program will automatically detect the device.

5. After the U disk is detected, we click on one key to make, and at this time, it will prompt to clear all the data of the U disk and format it to ensure that the U disk has no data or has been copied. Click OK.

6. Immediately after the start of the U disk startup disk production, in this process, please do not move the computer, let the program be completed, otherwise it is very likely to interrupt the production of the U disk, the production fails, do not move the U disk, follow the prompts.

7. After about dozens of minutes, it will be completed, please wait patiently, after completion, there will be a prompt, whether to carry out the U disk test operation, click Yes.

8. At this time, the computer simulation will be started, and when the interface of the installation system appears, it means that our USB disk boot disk has been successfully made.

9. Later, you can use your own USB flash drive to operate the system or enter the PE system or other operations, such as cracking passwords, restoring the system, etc. When you turn on the machine, you want to select the USB flash drive to start, and you can see the screen and operate.

A computer with a Windows system (for making a boot disk) and a USB flash drive of 4G or more.

Windows 10 system package.

Floppy pass Ultraiso software.

<>5. Click "Install":

6. Installation completed:

7. Open the Ultraiso software you just installed (you need to right-click the Ultraiso icon to select Run as an administrator under Windows7 system), and click "Continue Trial".

8. Now start to make the U disk version of the system disk.

Open the floppy drive software and plug in your USB flash drive.

<> click Boot --- write to the hard drive image.

Select your USB flash drive in the hard drive.

Click Write and you're ready to go.

Be patient: <>

Success, you now have a USB flash drive version of the system disk.

Follow the above steps, and the USB flash drive boot disk of the Windows 10 image is completed.

It's easy to make, but it's a bit complicated to use correctly:

How to make and use a USB flash drive boot disk (you can use your existing operating system to complete the creation and learn how to use the tutorial)!

1) System disk space requirements:

1、xp：15-20gb

2. Win7 Win8: 50GB is recommended

2) Introduction to the function of the U disk boot disk:

1. Install, back up, and restore the operating system.

2. Lossless partition [partition assistant.

3. Hard disk detection and repair.

4. Data recovery.

5. Commonly used DOS toolbox.

6. Cracking and clearing of operating system passwords.

With a plate in hand, everything is worry-free (it is very convenient to upgrade the PE maintenance tool).

3) The production and use of the U disk boot disk.

1. How to make a USB flash drive boot disk:

2. Operating system image installation package**: recommended to the system city** (from XP to Win7 Win8, there are many versions and rich inventory), generally in ISO format, decompressed. Save the system image installation file with the suffix of gho to another partition!

3. How to install the operating system:

Insert the U disk boot disk, restart the computer to enter the BIOS, set the U disk as the first boot, restart the computer again to enter the U disk boot disk PE menu bar, select to enter the PE system (recommended lite version, conducive to fast loading data), open the ghost application, put. Deploy the image file with the suffix of gho to the system disk, and finally restart the computer, unplug the USB flash drive, and the computer will automatically complete the installation of the operating system!

P.S. Ghost App Terminology:

1. local-partion-from image. The image installation file with the suffix gho can be deployed to the system disk (primary), which is the standard procedure for installing the operating system!

2、local-partion-to image。Select the system disk, here are the steps to make and backup the operating system image file!

3. local-partion-check, find. The gho image file is the standard procedure to check whether the image file is complete (in case the operating system installation fails due to an error in the image file).

If you want to use the U disk as the startup disk, you can ** "Youqitong" U disk startup program, run, specify the U disk to be processed. At present, the U disk startup program of "Youqitong" has not found the Trojan horse and the imposed program.

How to make a USB flash drive boot disk.