How to make the content of a computer monitor display on a TV?

1--- Your TV must have a VGA interface (digital TV basically has it).

2--- There must also be a connecting wire, which is the kind with nine needles at both ends.

If it's a digital TV, it's just a direct connection, just like connecting a computer monitor.

Buy a fifteen-pin cable, there is an interface behind the TV, just connect it to the computer, provided that the TV must have an excuse to connect to the computer.

Buy one. vga

The connection line will be fine, 20 yuan.

Just one. vga

Lines will do the trick.

If you're going to display both on a monitor, buy a VGA splitter. One out of two).

It's ready to use.

There are a variety of interfaces,The most commonly used S port,To have an independent graphics card,Just buy a cable,You can also buy a card,Connect to the TV,Just ask the merchant,Connect like VCD。

Just buy a cord and plug it in.

Take Midea TV as an example:

1. First of all, use HDMI connection to connect the TV and the computer, it should be noted that when connecting for the first time, the TV may not recognize the computer, you can turn the TV off and turn it on, or restart the computer.

2. Then pay attention to the choice of source, if it is directly unplugged from the set-top box to connect to the computer, then the computer should choose the source of the set-top box, if it is another line, remember to switch the computer to another line of source.

3. If the TV screen is still incomplete after the above operations, it may be a problem with the computer display settings, search for "display" in the lower left corner of the computer desktop"and click Open, then select Duplicate Display in the multi-monitor settings, and the TV screen and computer screen are synchronized. However, at this time, the computer monitor is deactivated, and the content of the computer is only displayed on the TV screen.

4. Then open the TV menu, find and select the screen ratio, and finally select the panorama, and the picture can be displayed normally.

This method is suitable for Midea, Gree, Haier and other brands of TVs.

Take Haier TV as an example,How to use TV as a computer monitor:

2. Then connect one end of the cable to the computer and the other end to the TV.

3. Then turn on the TV, click the menu on the remote control, and select the source of the TV.

4、After the adjustment, you will find that the TV and the computer have synchronous screens,This is a successful connection。

Meaning:

TV and computer all-in-one,Set the functions of TV and computer in one,Zao Quiet is not only a computer with outstanding performance,It is also a perfect LCD TV。 The built-in AIDBOARD VGA TV digital chip realizes leading functions such as automatic dynamic noise reduction, picture adjustment, and noise cancellation, so that the picture is like water filtered by multiple layers, and finally achieves the purity and freshness of returning to nature, showing the best picture quality close to reality for users. The picture is natural and realistic.

Look at what interfaces your computer output and TV input have.

These 2-3 years of TVs usually only have HDMI input, especially those with Android, only HDMI input.

Looking at the computer, usually the graphics card has VGA and HDMI output, the old computer graphics card only has VGA output, and the new computer only has HDMI and DP output.

Therefore, you have to wire according to the actual situation. If the wiring is not successful, you need to equip it with a converter such as socks.

If the computer only has VGA output, and the TV only has HDMI input, you need to buy a VGA to HDMI converter on Jingdong, and an HDMI cable, convert the computer's sound muffled oak frequency, VGA to HDMI, and connect to the TV through the HDMI cable.

On the TV, use the remote control of the TV to switch the signal input source, for example, your TV HDMI-1 is connected to the set-top box, HDMI-4 is connected to the computer, then switch to DHMI-4, and you will see the computer screen. When you want to watch TV, then use the remote control to switch the input source to HDMI-1.

In practice, 99% of people never know what a signal input source is.

It's been a long time on it.,It's actually a computer connection.,TV remote control switch input.。

How to use a TV as a computer monitor: 1. You can find the available input socket next to or behind the TV. HDMI input sockets are now generally available.

2. Connection**. If you don't have HDMI input and HDMI output connected, then you have to check whether the two plexus are connected to Tan Zheng Qingkou. This makes it possible to use a separate ** cable before that.

3. Go to the settings of the TV and modify the output on the computer.

4. Go to the computer settings and modify it to use the TV as the monitor.

5. Adjust the resolution, so that we have completed the TV as a monitor.