Is it appropriate to make an open pipe or a hidden pipe for a gas pipe?

It is recommended to make the gas pipeline into an open pipe, which is more convenient to repair, and if something appearsSafety hazardsAble to detect in time,And now the gas company is not allowed to go through the hidden pipe.

Do you know the installation process of household gas pipes? Gas pipes are typically installed in hallways, stairwells, kitchens, or auxiliary rooms. It is not allowed to place them indoors or on the ground floor of bedrooms and bathrooms. They are not allowed to pass through the distribution room.

flues, air intake pipes, etc. They can be installed secretly when there are special requirements. The open tube is directly visible and exposed to the surface.

An obscurated tube is one that is wrapped, covered, or buried in the ground, and the covered object must be opened in order to be seen.

Open pipes are pipes along walls, beams, columns, and ceilings.

Under and surface-mounted next to the floor. Its advantages are low cost and easy installation, maintenance and repair. The disadvantage is that the surface of the pipe is gray, which will produceCondensate, affecting environmental sanitation and hindering the aesthetics of house decoration.

Concealed pipe refers to the concealed installation of pipelines on the ground, under the ceiling or in indoor tube wells, pipe trenches and pipe trenches. The advantage of dark clothing is that it is hygienic and has a beautiful appearance. The disadvantage is that the project investment cost is high and the construction and maintenance are inconvenient.

Because it's a hidden project.

If drinking water pipes or construction issues cause water leaks, the consequences are even more serious and new renovations can be damaged.

Some people think that open fittings are not good for the aesthetics of the house, so they choose hidden fittings when installing water supply pipes. Another part of the owners considered the safety of the water supply pipeline and chose the open installation method. In fact, otherwise, the advantages and disadvantages of surface-mounted fittings and concealed pipe fittings will change under certain conditions, which mainly depends on which water pipe is chosen by the user as the material of the surface-mounted fittings.

However, for the sake of safety and convenience, I still prefer open pipe installation.

To make an open pipeline, it is convenient to detect its gas concentration, and it will have great potential safety hazards when it is made into a dark pipeline.

Bright tube! The open pipe installed by the gas company is not allowed to be wrapped during the decoration, otherwise the property management company will not pass the acceptance! Safety is more important than pretty.

I think it's better to make the gas pipe into an open pipe, so that it is easy to observe from time to time in life.

If the gas pipeline is made into an open pipe, it is still more convenient to use and observe on weekdays, and it is easy to troubleshoot and solve problems when they occur.

Whether the gas pipe is suitable to be made into open pipe or dark pipe depends on the structure and decoration style of the house.

If it is installed by the gas company, there is no problem, but you have to remember the location, and these places are not allowed to be eyed.

This has a professional personnel installation, and it is not a matter for you to decide, so you can consult with professional personnel.

Summary. Hello, I'm glad to answer for you, about your question "Is it better to install a bright pipe or a dark pipe for wall-hung gas furnace pipes" has been inquired: Kiss the wall-hung gas furnace pipes are installed on a good road, and the maintenance is convenient and low.

The open pipe is directly visible and exposed outside, and the dark pipe refers to the one that is wrapped or covered or buried in the ground and needs to be opened to be seen, the national gas law has passed the gas pipeline that can be used in the wall, and the corresponding way is that the gas pipeline in the wall must use the national standard galvanized pipe, and the casing must be installed for the wall pipeline, and the gas pipe as long as it is seen, it is the open pipe that cannot be seen is the dark pipe.

Hello, I'm glad to answer for you, about your question "wall-hung gas furnace pipe installation is better or dark pipe" has been queried: kiss wall-hung gas furnace pipeline installation road is good, maintenance is convenient ** low. The light and dry pipe is directly visible and exposed outside, the dark pipe refers to being wrapped or covered or buried in the ground and needs to open the covered object to be visible, the national gas law has been slowly passed, the gas pipeline can be used in the wall, the corresponding way is that the gas pipeline in the wall must use the national standard galvanized pipe, for the wall pipeline must be installed casing, as long as the gas pipe is seen, it is the open pipe that cannot be seen is the dark pipe.

The hydrophilic furnace is a national standard energy-saving periodic operation furnace with an ultra-energy-saving structure and an energy-saving effect of 65%. The trolley adopts anti-impact sealing bricks, and the furnace door adopts a spring-type compression mechanism, which automatically seals the sensitive trolley and the furnace door, and integrates the rails, without the need for foundation installation, and can be used by high hands when placed on the level ground. It is mainly used for quenching, annealing, aging and heat treatment of various mechanical parts such as high chromium and high manganese steel castings, ductile iron, rolls, steel balls, 45 steel, stainless steel, etc.

Summary. The heating water supply pipe is well piped, and the pipe of the radiator is surface-mounted.

Is it better to use open or hidden pipes for heating water pipes? Is the pipe of the radiator installed openly or concealed?

The heating water supply pipe is well piped, and the pipe of the radiator is surface-mounted.

It is very important to take the open pipe to find hidden dangers in time during the pressure test and future maintenance, and the open pipe also plays a certain role in the indoor temperature.

The use of hidden pipes is mainly for aesthetics, hiding the pipes in the wall, but when encountering problems such as heating pipe blockage and suppression, the hidden pipe is not very good for maintenance and operation. If the house is renovated, it is recommended not to use this method, which will cause secondary damage to the house.

It is very important to take the open pipe to find hidden dangers in time during the pressure test and future maintenance, and the open pipe also plays a certain role in the indoor temperature.

Summary. If you choose the advantage of the surface-mounted method, it is more time-saving and convenient to install, and if there is a problem in the later stage, it is relatively simple to repair, and you will find it in the process of driving. There is no occlusion, and the effect is even better.

If you choose the benefits of the way to install it, it is convenient to install it in a more time-saving way, and if there is a problem in the later stage, it is relatively simple to repair, and you will find it in the process of driving. There is no occlusion, and the effect is even better.

How to choose the concealed installation method, it should be in the wall, if there is a problem in the future, it will be more troublesome to repair.

Summary. The gas pipe can be installed with half open pipe and half dark pipe, but it is not safe, and it is not recommended to install half open pipe and half dark pipe for gas pipe.

The gas pipe can be installed with half open pipe and half dark pipe, but it is not safe, and it is not recommended to install half open pipe and half dark pipe for gas pipe.

It is best not to, after taking the hidden pipe, the corrosion of the pipeline is unknown, and the storage is clear in the safety hazard, and it is not easy to maintain. Pipelines that transport natural gas (including associated gas produced in the oil bridge maeda) from the extraction site or treatment plant to urban gas distribution centers or industrial enterprise users, also known as gas pipelines. The only way to transport natural gas in large quantities on land is to use natural gas pipelines to transport natural gas.

Of the total length of pipelines in the world, gas pipelines account for about half.

The branch pipeline can be buried in the wall, but try to use the pipe simmer bend directly without pipe fittings in the middle, connect the stove, water heater, and gas meter pipe fittings should be extended out of the wall.

Gas companies now make it mandatory to go through open pipes! It is best to modify the gas pipeline to the local gas company for the record, and the gas company will construct the gas company, which may be a little more expensive, but it is safer and saves you from being fined during the gas inspection in the future!