How do you reverse the library? Urgent, how to pour the positive and negative library

1. Before getting on the car, confirm that the left side of the car body is kept at a distance of meters from the sideline.

2. Get on the car, adjust the seat, start the vehicle, hang into the reverse gear, observe the small triangle glass of the right rear door from the inside of the car, when the front middle bar appears in two-thirds of the small triangle, hit the direction to the right, this is to continue to observe, when the front middle bar appears in the upper right corner of the rear windshield, stop and make a circle to the left, continue to observe the front center bar from the rear windshield to the right and disappear when the stop to the right to kill the direction. (If the current center bar is not visible in the small triangle position, but when the rear windshield has not appeared in the rear windshield, then there is no need to return to the left in a circle direction, only need to observe whether the line is parallel to the car body from the outside) continue to reverse backwards, from the left side of the car outside the observation library left side line and the left side of the car body is parallel to the left side of the car body (the distance is kept at 40 cm) stop and will be in the right direction, continue to reverse backwards, from the outside observe the left rear wheel to the corresponding point and stop.

3, one in and one out, hang into a gear, to the right to kill the direction, observe the left front wheel just pressed over the center line when parking, immediately to the left to kill the direction and observe the car body and the left side line to keep parallel to the car can be stopped, if the front of the car and the middle rod is still a distance, then should go back to the right direction, forward and stop at 5 cm from the middle bar. Engage in reverse gear, hit the direction to the right, observe the left rear wheel, stop when the left rear wheel just touches the center line, continue to reverse to the rear in the direction of the left kill, and observe that the left rear wheel is parallel to the center line when the stop (30 cm distance).

4. Two advance and two retreat, back to the right direction, hang into the first gear and walk forward for a distance, after hanging into the reverse gear, the car is reversed to the inside of the garage, and stop.

5. Diagonal out of the warehouse, hang into a gear, play a circle to the left, go to the front of the car really good between the two rods when the right is right, continue to drive forward, at this time should observe the distance between the left and right rearview mirrors and the two rods, you can turn the steering wheel to adjust. When the rearview mirror.

After two strokes, observe the left side of the tail, when the tail just out of the left front bar after parking, to the right to kill the direction, then continue to drive, when the body and the left side line parallel to the stop back to the positive direction.

6. Hang into the reverse gear, observe the left front bar and the right rear bar 80 cm behind a straight line, stop. Kill the direction to the left, reverse the car, observe the tail and the middle rod to keep at about 20 cm, pour into the warehouse (the distance is not 20 cm when the direction of the right circle continues to drive to the left when 20 cm to the left to kill the direction to continue to reverse), when the car body is parallel to the right side line when the stop, back to the right direction, out of the library is completed.

I was up to date when I took the exam :

When reversing, the nearest lever and the farthest lever are aligned, just like the left quickly kill the plate, and wait until the car is 20 cm away from the middle bar to return to a circle (put the head out of the window to look at the body) The car is back to the second lap, how not right, which side is wide to which side to hit the steering wheel! Remember not to hit too hard or for too long! So as not to touch the pole or sweep the line on the other side!

My heart breaks when I hear you say that, and I think of two weeks ago. I haven't taken the test either. 555555

Actually, this one. You should ask the coach. The coach will explain it to you in detail.

Such. I can't tell you clearly.

Is there still such a test? We're allowed to stop here!

What kind of car are you using, the model is different, and the point of view is also different.

Reversing warehousing operation skills:

1. Control the driving speed and idle with 1 gear or reverse gear throughout the whole process, and drive at what speed you start.

2. The control bureau should carefully observe the timing of the steering and reverse the process, grasp the key points of the steering, and turn in a timely manner.

3. When controlling the driving route test, the driving route of the car mainly depends on the speed and speed of rotating the steering wheel.

The commonly used reversing and warehousing methods are as follows:

1. Plan the path: find a suitable parking space first, and make sure that the length of the parking space is long enough to accommodate your vehicle. Before starting, observe the vehicles on either side of the parking space to make sure there is enough space to operate.

2. Choose a starting point: Park your vehicle about one parking space away from the front of the parking space. Then, turn on the right turn signal and get ready to start reversing.

3. Perform reversing: Rotate the steering wheel to the left to the bottom and slowly retreat. At this point, your vehicle will begin to turn right into a parking space.

4. Control direction: During the reversing process, maintain a slow and stable speed. Use mirrors and reversing cameras to see how far and where your vehicle is from a parking space. Adjust the steering wheel to ensure that the vehicle is reversing along a suitable path.

5. Pay attention to the angle: when the front of the car is parallel to the parking space, immediately rotate the steering wheel to the right, so that the vehicle gradually approaches the other side of the parking space.

6. Correct parking: When the vehicle enters the parking space and is parallel to the parking space, continue to reverse slowly until the vehicle is completely parked in the right position. Then switch to Forward gear and fine-tune the vehicle to ensure it is in the correct position.

Precautions for reversing and warehousing

1. Observe the surrounding environment: Before reversing into the garage, be sure to observe the surrounding environment, especially the vehicles and pedestrians on both sides of the parking space. Make sure there are no obstructions and enough space for reversing.

2. Use rearview mirror and reversing camera: In the process of reversing and warehousing, observe the distance and position between the vehicle and the parking space with the help of rearview mirror and reversing camera. This can provide a better view and help you stay on top of what is happening when you're reversing.

3. Slow operation: Reversing into the warehouse requires precise operation, so please keep it slow. Gradually tighten and weaken the throttle and gently adjust the steering wheel angle to maintain control of the vehicle.

4. Pay attention to blind spots: Pay special attention to blind spots during reversing, that is, areas that cannot be directly observed by vehicles behind you. When reversing into the garage, make sure to use reversing mirrors and side-view mirrors to observe blind spots, and use assistive devices such as reversing sensors to ensure safety.

5. Pay attention to the rear and side of the vehicle: When reversing into the garage, pay special attention to the rear and side of the vehicle to prevent collisions with parking spaces, walls or other obstacles. Make sure you leave enough space and prevent your vehicle from rubbing into nearby objects.

Reverse Preparation: The vehicle is parallel to the bottom line (the front wheel is positive, you can see whether the steering wheel and left front wheel are correct).

Inverted left library 1, hang the reverse gear, release the handbrake, slowly lift the clutch to semi-linkage, stabilize the clutch after starting, adjust the speed, and reverse backwards slowly; Turn back to the right rear to observe the right rear door triangle window, when the front center bar reaches the front of the triangle window, quickly hit the direction to the right (pay attention to keep the speed of the car at the slowest speed when hitting the direction).

2. If you observe that the right rear of the car may touch the middle bar, quickly turn back to the left in a large direction, wait for a while, and it is estimated that the rear of the car will not hit the middle bar, and continue to hit the right direction.

3. After the rear of the car enters the garage smoothly, observe the left body line through the left reversing mirror and the left side line of the garage is parallel, and quickly turn the direction to the left. After the front of the car smoothly enters the warehouse (at this time, the front of the car should not touch the rods on both sides), look back at the left reversing mirror body and the side line of the flat ** condition to correct the direction, wide, to the left repair, narrow, to the right, (you can also look back at the rear window center sign and the two rear rod center sign is aligned, if the right deviation, to the left repair, left deviation, to the right repair.) Keep the direction after repairing.

4. When the body reaches the stop sign position, stop.

Invert the right library 1, after reversing smoothly, when the No. 3 and No. 4 poles still have 20 cm to coincide (or when the body reaches the position of the kill mark), the direction is quickly killed to the left.

2. After approaching the middle pole, when the left rear is likely to touch the middle pole, quickly return to the right in a large direction, wait for a while, and it is estimated that it will not touch the middle pole, and continue to hit the left direction.

3. After the rear of the car enters the garage smoothly, observe the left body line through the left reversing mirror and the left side line of the garage, and quickly turn the direction to the right.

4. Adjust the left and right appropriately, and stop the stop sign.

Tips: 1. Try to reverse as slowly as possible, but don't stop in the middle.

2. The first time you die, you can play early than late, you can go back a little early, and you can't adjust it after taking a taxi late.

Stabilize the pressure after starting.

Commonly used points, the distance between left and right is between 1.5 and 2.5 meters, and the dotted line can be aligned.

Both sides of the positive and negative library explanation method, this library is not difficult to learn!

On the contrary, it is relatively easy to point (than the positive inverted), the main thing is that you are pouring out of the warehouse is to be in place, the right side of the body is about to leave the sideline, otherwise the impact will be reversed;

On the contrary, look at the lower edge of the rearview mirror to cover the yellow line and immediately kill to the left, and then observe the left rearview mirror, observe the distance between the body and the corner of the trousers when it appears, if it is less than 30 cm, it should go back to a little direction (about 3 4 circles), and if it is more than 30 cm, do not go back. If it is back in the direction, when the corner disappears in the rearview mirror, it will be killed to the left immediately again (if you don't go back in front, you won't do this). Continue to observe the left rearview mirror, when the body is parallel to the side of the library, immediately return to the positive direction, pay attention to the left and right observation of the rearview mirror, which side is wide to the direction of the correction.

Parking should be considered after two corrections, otherwise it is easy to miss the parking opportunity.

The distance on the left is likely to be when reversing, and the direction is late when looking at the point.

After coming out, it is a circle and a quarter, that is, after the steering wheel is played a circle, it is hitting, until the left hand is down and the right hand is on top.

The first point: the starting point.

Slowly release the clutch and reverse, look back at the right rear, when the middle column (black bar) of the right rear window just touches the edge line of the right library, or when you look under the rearview mirror, about 2 fingers, start to kill the direction. (Pay attention to the relationship between speed and position).

The second point: start the correction point.

Observe the position of the right front handle of the door against the rear end, and start to correct when this point is about to touch the corner of the library (about (5-15 cm)), usually half a circle correction. (Assuming that the direction is a circle and a half to kill, it is also called a straight, and the left hand and right hand start to play the direction of the pendulum).

The third point: the point where the correction is completed.

This point is hung up by many people).

Observe the front end of the front handle of the door (note that it is the front end, just the rear end) just enters the corner of the garage or when the extension line of the right side line of the garage is considered: 1. The right continues to die; 2. Do not kill directly back to the right (a circle direction), these two situations depend on how far the end of the body is from the right library edge line (more than 30 cm to the right to kill), less than 30 cm do not need to die, directly back to the right.

The fourth point: drag the body point.

This point is for the situation when the third point is full on the right, if the third case is not full on the right, you can jump directly to the fifth point).

This point depends on the left rear mirror, when the entire left library edge line has just appeared, immediately return to the body.

Fifth, the parking spot.

Some people look at the left rear mirror just to cover the bottom, and some people look at the middle of the left door front handle into the middle of the bottom line of the library, and the specific habits are just up to each person.

Note: The above five points are the same except for the first and fifth points due to the changes in the front and back of the seat, the height of the person, and the rearview mirror.

Dumping teaches you how to find the right point.