What is the outline of bathroom sanitary ware maintenance content

On the original top surface of the bathroom, there is a sewage pipe for upstairs, and the height of the ceiling will be restricted by the pipe. Therefore, the distance from the bathroom ceiling to the ground is about 250 cm, and less than 230 cm will appear depressing. The common toilet on the market now occupies an area of 37 cm to 60 cm.

Among them, 30cm and 50cm are the standard width of the toilet, the standard height is about 70cm, and the length is about 70cm. A hanging or cylindrical sink can take up an area of 70 cm to 60 cm, while a floor-standing sink measures 90 cm to 105 cm, just enough for another person to wash next to it.

In addition, the mirror height of the dresser should be 135 cm, so the height is facing the human face. The square shower has an area of 80 cm 80 cm. A standard bathtub generally occupies an area of 160 cm to 70 cm.

Also, even if the bathroom is narrow, leave room to move around when installing the bathtub. Therefore, the distance from the bathtub to the opposite wall is generally 100 cm. The size of the door leaf is about 150 cm to 235 cm.

Although the bathroom is small, some space must be set aside, and the width from the shower room to the door is not less than 76 cm. The size of the aluminum gusset used in the ceiling of the bathroom is relatively strict. The unity of the square is 30 cm 30 cm.

The rectangular one is unified to 30 cm and 60 cm, and there are some individual aluminum gusset sizes of 30 cm and 45 cm switch sockets, and the specifications are also very clear, mainly 86 series, 120 series and 118 series. Take the 86 series as an example, the length is centimeters, the width is centimeters, and the common square switches and sockets are all 86 type column basins. Basically, it is about 600mm wide and 450mm deep.

1. A small blockage of the toilet blockage.

Many toilets will have a slight blockage at the beginning, this kind of small blockage we only need to add a little water to the toilet, take a "water puller" to the toilet mouth poke a few times, hear the "knock" sound on the pass, when it has not been passed, this operation is repeated, if there is no "water pull" at home, you can find an old cloth mop, with the "dun cloth method" to operate, the principle is the same as the "water pull", it is a good way to take materials on the spot.

2. The toilet is clogged.

Prepare a roll of wide tape (or plastic wrap), wipe the toilet around it, and then wrap the wide tape (or plastic wrap) tightly around the toilet mouth, press the flush button, and press down when the middle of the wide tape (or plastic wrap) bulges up, and use strong pressure to flush away the blockage blocked in the toilet pipe, this principle is similar to a water puller, but it is too troublesome to operate and a little impractical, so it is not recommended.

3. The toilet is clogged.

If the toilet is moderately clogged, you can find a wire, it is recommended to take a drying rack from local materials, bend the wire into a hook, poke it into the toilet pipe, and hook out the blockage such as hair. You can also find a glue pipe, connect one end to the faucet, and stuff the other end into the toilet, and seal the toilet mouth tightly with rotten cloth and old clothes, open the faucet and use the strong water pressure to flush away the dirt and dredge the toilet.

4. The big blockage of the toilet blockage.

The toilet is seriously clogged to the extent that these small methods can not be solved, and there is no other way than to ask professionals to come to dredge it? It is recommended to have a toilet dredge artifact at home, basically any situation of toilet blockage can be solved in the future, and it is not expensive, the important thing is that the operation is simple and the effect is leveraged.

What tools to use when the toilet is blockedIf you want to dredge the toilet at one time, it is true that the tools are easy to use, no matter what the reason is, with these tools at home, when the toilet is blocked, it can always be used.

1. Iron wire, long soft snorkel wire can hook out things such as rags and paper towels blocked in the toilet, and the snorkel is mainly used to inflate the toilet bowl to increase pressure and achieve the purpose of dredging.

2. Pi Zhenzi (toilet suction bowl) is sold in daily grocery stores, a few dollars a piece, for all kinds of toilet blockage and incurable diseases, it can be passed as soon as it is sucked, and the operation is simple and effective.

3. The mop is mainly used to press the toilet with a mop when the toilet is full of water, mainly for the toilet blockage caused by pressure.

1. In the process of home decoration, the decoration company is only responsible for sending workers to carry out on-site construction and the management of the construction site, while the responsibility for material procurement is not borne; All materials are procured by the owners themselves.

2. The term contractor and material in home decoration refers to the fact that the decoration company will bear all the work related to construction, and the role of the owner is only to pay and accept the project.

3. Contractor accessories are a common cooperation method in the process of home decoration, which refers to the main materials that the owner is responsible for purchasing, such as wall and floor tiles, floors, sanitary ware, lamps and lanterns, etc.; In addition to the construction, the decoration company should also be responsible for the procurement of auxiliary materials, including cement, sand, glue, hardware, wood and products.

Energy saving and environmental protection decoration I believe that the owners and friends who are ready to decorate are no strangers, Huaxia decoration network for you to sort out some energy-saving and environmentally friendly decoration knowledge, I hope to help your decoration: green decoration must grasp the six points.

Pay attention to energy-saving decoration first to be more environmentally friendly.

Energy-saving decoration can play a role in creating an environmentally friendly home. For example, the full use of gypsum board and other lightweight partition wall materials, energy-saving lamps, water-saving sanitary ware, etc., materials play an effective role in decoration energy conservation and environmental protection and protection of the environment. As Chengdu's 18-year-old brand enterprise Huada Decoration has recently taken the lead in launching the promotion measures of "energy-saving decoration is more environmentally friendly", they have advocated a large number of "energy-saving decoration and environmental protection" measures in design, materials, construction and supervision, such as in the construction, the full use of wire connectors for power connection operations, abandoning the traditional construction of bare wire power connection, more safe, power-saving; Promote the use of finished assembled cabinets, doors and door sleeves and other wooden seat products in home decoration, and reduce the use of traditional chainsaws and paint oil indoors, which is not only environmentally friendly but also reduces the ...... noise pollutionAll these can achieve effective energy saving and environmental protection.

Feeling energy savings starts with design.

How to ensure that the real "energy saving" is achieved is inseparable from professional design. In this regard, Huada Decoration, a first-class decoration design qualification enterprise that took the lead in carrying the banner of rebellion in the industry, put forward a series of suggestions to start with the design of comprehensive energy-saving decoration.

Three <<< to pay attention to to create an environmentally friendly home

Suggestion 1: In fact, the complex "full do" of hard decoration is not equal to luxury, and the design of ceilings, ceilings, wall decorations, etc., even if the room seems depressed and dull, it is also a waste of materials.

Of course, simplicity is not simple, it requires designers to have professional design skills, skillfully use design skills and decoration materials to improve the decoration taste of the owner's bedroom, create a good home atmosphere, and minimize the waste of materials.

Suggestion 2: A good design scheme relies on lighting to create an effect. Movement - most light sources should be turned on when guests come and when they have a meal; Quiet - when watching TV or chatting, design a few highly decorative modeling lamps (with energy-saving lamps) on the top or behind the sofa, turn on at this time, there is naturally another "quiet" atmosphere, so that it can not only achieve the effect of luxury house but also meet the energy-saving plan.

Suggestion 3: Use lightweight partition wall materials such as light steel keel and gypsum board, energy-saving materials such as plastic steel doors and windows, energy-saving lamps, and minimize the use of clay solid bricks, spotlights, aluminum alloy doors and windows, etc.