Server Boot Error? 50

Error message: Windows Server 2003, Enterprise Edition with Service Pack 1 Integrated Required for this installation

insert a cd/*** with the required service pack and click "ok" to continue the installation.

otherwise,click"cancel" to return to serverguide.

Ask the experts to help find a solution.

I don't know what the reason is that the remote connection of the rented server can't be connected, and I asked the rental company that it was a system crash and I wanted to reinstall the system. Then it is said that it is to format the C drive, because the data application is generally not placed in the C drive, so it doesn't matter much. But later, I said that because the system was installed with a boot disk, it would be formatted to reinstall, and I went to .........Doesn't this mean that all the information is gone?

I would like to ask what to do, does this system installed with a boot disk have to be installed in full grid? Or is it a prevarication from the technician of the rental company? If I really have to be full, is there any way to get the data back?

Error message: After booting, the screen displays a message indicating error, loading, operating system, or missing operating system, or disk io error, replacing the disk, and then pressing any key.

Fault Analysis: The cause of this failure is usually an error in the DoS boot record. The dos bootstrap record is located in the logical 0 sector and is generated by the advanced formatting command. After checking that the partition table is correct, the main bootloader will send the DOS boot record to the memory 07c00h, and then check whether the last two bytes of the DOS boot record are 55AAH, If these two bytes are not the case, a missing operation system prompt is given.

Solution: Positive core: These problems can be solved using ndd, but there are different solutions depending on the error prompt.

1.The error message is invalid system disk, replace the disk, and then press anykey. In this case, it is usually because the system boot file is deleted or corrupted, and the system boot file can be transferred to the C drive with sys a c.

The loading system error message is displayed. This kind of prompt indicates that the start position of the active partition indicated in the partition table is wrong or the DOS boot record is wrong, and can only be fixed with NDD.

An error message is displayed in the operating system. Use diskedit the boot area of the corresponding active partition and change the last partition end flag to 55aa

This should be the bootstrap file to take the hail and not found. One may be corrupted by a virus, and the second may be that the data cable is not connected properly. The third possibility is that there is a bad sector in the location of your hard drive.

It's also possible that you deleted it when you shut down your computer the last time you used it or accidentally deleted other files. You use the system disk to detect and fix the boot file and the bad sail lane. If it doesn't work or you can't, you can reinstall it.

Time was about the same. If the hard disk is badly broken, you can only replace the hard drive.

It's probably a virus, I just tried it the other day. You try to remove the motherboard battery for a few seconds and put it back on. It's very simple, and it won't be soso again.

Or leave a message. If it's not a virus, then there is a disk boot sector error. If this is the case, it is usually necessary to re-repair the disc or format guess the aged hard drive and then re-follow the sensitive and coarse system.