Want to know how to fold the triangle plug, how to fold the triangle plug?

I'm a newbie and I'll give you a little advice based on my experience. The paper with a triangular fold should have a length to width ratio of two to one, or the paper is better, and it is okay to use four to one directly, without folding it in half first. As for what kind of paper to use, of course, it should not be too soft or too brittle, for example, the texture of printing paper is good, you can go to a place that specializes in selling handmade paper.

Of course, you have to cut it yourself to buy a large piece of paper, and it is better to use a knife than to use scissors, and the lines are straight. You can also choose the square paper of the origami crane, and then cut it, which is more convenient, but the cost is high. Hope it helps you a little.

The reason why it is two to one is that it is first folded in half to become a more slender four to one, and then folded, and four to one is the standard size of the triangular plug (you will always fold it). As for folding in half first, it is because the follow-up project of the triangle plug is relatively large and strong, so it is slightly thicker and more solid. If the paper itself is thick, you don't need it, and if it's too thick, it won't be folded well.

The square paper of the origami crane is square, that is, one to one, and it is not the raw material for two triangle inserts, if the paper is good, you can cut it into four. It's cheaper to buy large sheets of paper, but it's hard to cut them into small strips little by little!

For example, a rectangular paper like a playing card, take the long side and fold it in half, and then take out the center point and fold it in half, there will be a little excess after folding, and then fold the corners in half into a triangle, and put the excess into the middle of the length.

The triangular interpolation method is briefly described as follows:

Fold the long side of the rectangular paper in half, and then fold the short side in half.

The left and right sides are folded upwards along the creases, the paper is turned over, and the upper two corners are folded inward.

Fold the extra part upwards and fold it in half along the midline.

Triangular insert, also known as three-dimensional origami, 3D origami, is a kind of origami, making triangular origami works can exercise your brain, delight your body and mind, and can bring convenience and fun to life.

A rectangular piece of paper, cut into an average of 8 sheets, can be folded with unwanted book paper;

Select the longest side and fold it in half;

A crease is folded in half on the left, and two triangles are folded smoothly to the middle.

On the back, the extra edges can not be cut, and 2 small triangles should be folded.

Then, fold upwards to hide the small triangles.

Now it's still a triangle, a little bigger than just now, folded left and right in half.

The above folding method is to fold out these 2 holes, which will not be loosened when used to be inserted.

You need to fold a lot of triangles to make it boring.

9.The most basic spelling method is like this, 1 up, 1 down, 1 up...Let's prepare....And so on and so forth. But it must be tightly inserted, and the tight insertion will not be loosened.

10.To make a base for this patchwork, friends who are patient and interested can try it.

How to do the triangle plug is introduced as follows:Take, for example, a blue paper the size of a dime note:

1. Fold in half before and after, and then fold left and right, and see a crease in the middle.

1) Step 1:

2) Step 2:

3. Fold the extra inward, and again, fold both sides.

1) Step 1:

2) Step 2:

3) Step 3:

5. Fold the triangle in half to the middle, and it will become a triangle with a good cavity.

6. The two triangle plugs are combined together in this way, and many of these triangle plugs can be folded at ordinary times.

<> can also choose different colors of paper to combine them into a variety of colored objects.

Triangular origami can be used to make crafts. For example, the triangle swan, triangle fruit, etc., the design of the work is novel and unique. In addition to making origami work "stand", three-dimensional origami will also look more cute and challenging than ordinary origami, because with enough creativity, imagination and patience, you can make fun pieces of any shape out of triangular parts.

Making triangular origami works can exercise your brain, delight your body and mind, and even bring convenience and fun to life, such as triangular vases, triangular penguins, etc. are very interesting decorations. Frame home decoration with flat works made of triangular inserts, which is more of a flavor. It is even more innovative to make some small mobile phone accessories.

With the triangle plug can make a variety of ornaments, in the process of making the finished product, it is the best choice for a hobby.

The practice of triangular origami is as follows:

1. First of all, take out a piece of ordinary A4 paper. You can choose different colors of paper according to the color and style of the finished product you want to get.

2. Fold the A4 paper in half along the short side of the paper, rotate the paper and face the short side towards you.

3. Fold in half in that direction.

4. Fold in half in the above direction. This is the last time to fold in half.

5. Paper, and rotate the paper so that its long side is facing you.

6. Then fold in half along the long side.

7. Fold in half again.

8. Paper, and then cut paper along the creases to get 32 squares.

9. Take out one of the squares so that its long side is facing the maker.

10. Fold in half in the horizontal direction.

11. Fold in half in the vertical direction, and pay attention not to fold hard in this step.

12. Fold the right half of the paper upwards so that the bottom edge and the crease in the middle coincide. The same is true on the left, and the resulting figure looks like an upside-down house.

13. Flip the origami paper over, and then fold the outer corner down.

14. Then fold the top two pieces down to get a triangle.

15. Fold it in half again.

16. Fold many identical triangles according to the above method, and then stack them together.

17. Done.

Triangle insert, also known as three-dimensional hand origami, 3D origami, is a kind of origami, first use paper to make small triangular parts, and then use this small insert to put together more styles of large items.