Where is there a professional cleaning and repair shop for car radiators

Updated on Car 2024-04-28
11 answers
  1. Anonymous users2024-02-08

    How to clean the car water tank If the water tank is not cleaned properly, a large amount of scale will be generated, which will greatly affect the heat dissipation of the water tank. Because the thermal conductivity of scale is very low, only 1 25 of cast iron and 1 50 of brass, the scale formed in the lining of the cylinder block and the water channel of the cylinder head, the temperature of the local area rises due to the poor heat dissipation, which will lead to cracks in the weak parts of the engine and deformation of the cylinder head. It not only worsens the heat dissipation performance of the cooling system, but also worsens the lubrication conditions, increases the engine temperature, and accelerates the wear of the engine system; It also blocks the heat dissipation pipe or cooling system pipeline, which greatly reduces the heat transfer efficiency and makes the engine overheat directly endanger the safety of the driver.

    1. Manual cleaning method: the car water tank needs to be disassembled, and the scale is removed with a manual hammer, scraper, shovel, etc.; The descaling efficiency is low, the labor intensity is high, it is not easy to clean, and it is easy to cause secondary damage to the water tank. ?

    2. Ordinary scale cleaning agent: the water tank needs to be disassembled, and the removal is not thorough, the odor is large, and the corrosiveness is strong, which is easy to cause the aging of the water tank and shorten its service life. 3. Professional car water tank descaler:

    It can be cleaned without disassembly, and can also be cleaned without stopping. The special scale cleaning agent can be directly poured into the automobile water circulation system, let it soak, idle cycle or drive for 20-30 minutes, the water tank and the descaling agent inside the system are discharged, and the water can be rinsed repeatedly to effectively remove scale, rust, mud and various harmful substances in the engine water circulation system. ?

    In addition, to avoid the formation of scale, it is necessary to pay attention to the selection of coolant in the water tank. Many drivers don't pay attention to the use of coolant and its merits, and usually just plain water is added to the tank. The calcium and magnesium ions in the water can easily form inorganic salt scale in the cooling system.

    When these scales form in the cylinder block lining and cylinder head waterways, it can affect heat transfer efficiency, create localized high temperature zones, deteriorate lubrication conditions, and accelerate wear on the engine system. High-quality engine coolant is composed of polyester grade ethylene glycol, distilled water, scale inhibitor and other raw materials, which can effectively prevent the formation of scale, and can partially remove the original scale and improve the efficiency of the cooling system.

  2. Anonymous users2024-02-07

    Please ask about the car washing tank around here.

  3. Anonymous users2024-02-06

    100-300 yuan.

    Stop the vehicle and turn off the engine, after the coolant temperature cools down, open the expansion kettle and fill the water tank cleaning agent, start the engine until the cooling fan works, then idle for 5-10 minutes, turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure that all the fixing screws have been unscrewed, and then slowly disassemble from both ends to the middle, and do not break the fixing buckle.

    Ensure that the coolant temperature is completely cooled and then drain the water tank cleaner with the coolant, and finally replace the engine coolant with a new one, because the use of water tank cleaner needs to replace the engine coolant, and the operation of replacing the coolant requires a lot of professional tools and equipment, so we recommend that you go to a 4S shop or repair shop for treatment.

    Car water tank precautions.

    When driving the car, when it reaches 20,000 kilometers, it is necessary to change the antifreeze, and the specific time to add it must be decided according to the use and environment of the car. However, it is necessary to learn to have regular checks on antifreeze.

    For some car owners, it is necessary to run at high speeds frequently. Before we want to run at high speeds, we must first check whether the antifreeze needs to be added. You can't add too much antifreeze, and you can't forget to add it.

    If you don't add it in time, the engine will burst due to overheating. If the engine does not receive antifreeze support in time and initiates a temper strike, it will be very troublesome.

  4. Anonymous users2024-02-05

    1. If you go straight to a small repair tank shop, it is about 120. The large repair shop is about 100 yuan, and the roadside water tank stall is 50-60 yuan;

    2. Make sure the engine is cooled down and turned off. Remove the radiator cap and make sure the engine is cool. If the radiator cover is too hot to touch, it means that the engine has not cooled down;

    3. Open the drain plug at the bottom of the radiator and let the coolant flow into a bucket. Coolant should be disposed of properly to avoid environmental hazards.

  5. Anonymous users2024-02-04

    Car water tank cleaning** is about 500 yuan. Since the use of tank cleaner requires the replacement of engine coolant, and the operation of replacing the coolant requires a large number of professional tools and equipment, we recommend that you go to a 4S shop or repair shop for treatment.

    Question: The water temperature gauge of the car does not come up, or the temperature rises slowly, and sometimes it is not up or down, whether the water tank is blocked.

  6. Anonymous users2024-02-03

    Car washing tanks doesn't cost much money, but about 50 100 yuan.

  7. Anonymous users2024-02-02

    How much does a car wash tank cost, how much does a car wash tank cost.

  8. Anonymous users2024-02-01

    Normal disassembly and assembly, the store is different, ** is different. Dozens of bottoms, hundreds of highs. For maintenance, if the car is very old, it is recommended not to do cleaning, the water tank cleaning agent is highly corrosive, and it is easy to wash the aging car box and leak it.

  9. Anonymous users2024-01-31

    After the car water tank is fouled, it can be cleaned and removed with a tank cleaner. Most cleaning agents do not completely remove limescale and acids from the waterway, and sometimes they can soak large pieces of limescale that have fallen off, but this will clog the waterway, and sometimes the tank needs to be removed for cleaning. If you use a powerful cleaning agent, the scale will be suspended in the antifreeze in powder form and will not clog the water channels in the engine.

    What are the benefits of using a car radiator descaler? Let's see how the car water tank is being cleaned.

    Introduction to the descaling method of automobile water tank.

    The car radiator tank needs to be dismantled, and the limescale is removed with a hammer, scraper, and shovel. The descaling efficiency is low, the labor intensity is high, it is not easy to clean, and it is easy to cause secondary damage to the water tank.

    The water tank needs to be disassembled, the water tank is not completely disassembled, there is a strong odor and corrosiveness, which can easily lead to the aging of the water tank and reduce the service life.

    It can be cleaned without disassembly, and it can be cleaned without stopping the car. Special limescale cleaners can be poured directly into the car water circulation system. After soaking, idling or driving for 20-30 minutes, the descaling agent inside the water tank and system can be discharged, and through repeated water washing, it can effectively remove scale, rust, mud and various harmful substances in the engine water circulation system.

    Introduction to the descaling method of automobile water tank.

    First, you need to make sure that the engine is cooled down and turned off. Remove the radiator jujube cover to make sure the engine is cold. If the radiator cover is too hot to touch, the engine has not cooled down;

    Second, open the drain plug at the bottom of the radiator to let the antifreeze into the bucket. Antifreeze should be properly disposed of to avoid harm to the environment;

    Third, close the drain plug and fill the radiator with water;

    Fourth, turn on the engine, turn on the heater regulation system (this operation will open the heater regulation valve), add cooling system cleaner, and dry turn the engine for 30 minutes (or follow the instructions on the cleaner bottle);

    Fifth, turn off the engine and let it cool for 5 minutes. Drain the liquid in the air of the radiator;

    Sixth, close the drain plug, add water to the radiator, and let the engine run idle for 5 minutes. Then, re-inject 50 50 of the antifreeze mixture of water and ethylene glycol antifreeze (the antifreeze used in the car before is required).

    Well, today's friends of the car will briefly introduce so many places about car radiator cleaning. I don't know if my friends have any further understanding of the whereabouts of car radiator cleaning. I hope Bian Xiao's introduction to the car stool can be helpful to friends.

    Millions of car purchase subsidies.

  10. Anonymous users2024-01-30

    Causes and emergency measures of car water tank leakage If the owner finds that the water tank is leaking, you can bend to the repair shop to check and replace the new water tank. If the water leakage still exists, the main considerations are: 1) check whether the water tank cover has been fastened; 2) Try to fill the water tank with air to see the water in the tank seep out of ** when under pressure, and then decide on the repair plan; 3) Unscrew the oil cap to see if there are traces of organic oil emulsification.

    If so, disassemble the engine and replace the cylinder head gasket; 4) There is a problem with the quality of the water tank. Emergency measures for car water tank leakage If the water pipe of the water tank is broken and the water pipe is buried and leaking due to vehicle vibration or vehicle accident during driving, measures can be taken according to the specific situation: (1) When the water leakage does not exceed 1mm cracks or 2mm holes, add a bottle of strong water tank plugging agent to the water tank and start the car.

    2) 5 10 minutes after the cooling water is turned on to start the big circulation, if there is a leak in the cooling system, whether it is a water tank, rubber pipe or pad, the leakage will be stopped. It does not need to be put after the leak is stopped, and it will not affect the heat dissipation and blockage. (3) If there is a slight leakage in the individual heat pipe without a plugging agent, the loose tobacco can be temporarily put into the water tank, and the tobacco can be blocked at the leakage of the heat pipe by using the water circulation pressure for temporary use.

    4) When the water leakage of the radiator tube of the water tank is serious, the leaking radiator tube can be cut from the leakage, and the cut radiator tube can be blocked with a cotton ball coated with soap, and then the cut radiator pipe head can be clamped flat with pliers, and then crimped to stop the water leakage. (5) If the rubber pipe joint leaks, use a screwdriver to clamp the rubber pipe joint around the rubber pipe joint twice, and then tighten it with pliers. If the rubber tube is damaged, the broken area can be bandaged with tape for temporary use.

    If the water tank is leaking, it must be solved in time, otherwise it may have a bad effect on the engine work. In addition, in daily use, it is necessary to pay attention to the inspection and maintenance of the water tank, and the choice of high-quality antifreeze coolant is also a kind of protection for the water tank.

    Millions of car purchase subsidies.

  11. Anonymous users2024-01-29

    After the car water tank is fouled, it can be cleaned with tank cleaner. Most cleaners do not completely remove limescale and acids from the waterways, and sometimes they can soak off large chunks of limescale, but this will clog the waterways, and sometimes the tank must be removed for cleaning. If you use *** strong cleaner, the limescale will be suspended in the coolant as a powder and will not clog the water channels in the engine.

    What are the benefits of using dish soap for car tanks? Let's take a look at the car water tanks are all being cleaned in **.

    How to descale a car radiator: an introduction.

    It is necessary to disassemble the car water tank and remove the scale with a hand hammer, scraper, and shovel. The descaling efficiency is low, the labor intensity is high, it is not easy to clean, and it is easy to cause secondary damage to the water tank.

    If the water tank needs to be disassembled, the cleaning is not thorough, there is a strong odor and corrosiveness, which can easily lead to the aging of the water tank and shorten the service life.

    It can be cleaned without disassembly or without stopping. You can pour the special descaler directly into the car water circulation system, let it soak, idle cycle or drive for 20-30 minutes, and then drain the descaler from the tank and the system. Repeated rinsing with water can effectively remove scale, rust, mud and various harmful substances in the engine water circulation system.

    How to descale a car radiator: an introduction.

    First, make sure the engine is cooled down and turned off. Remove the radiator cover to ensure the engine is cool. If the radiator cover is so hot that you can't touch it, it means that the engine has not cooled down;

    Second, open the bleed plug at the bottom of the radiator and let the coolant flow into the bucket. The coolant should be properly disposed of to avoid harm to the environment;

    Third, close the drain plug and fill the radiator with water;

    Fourth, turn on the engine, turn on the heater control system (this operation will open the heater control valve), add the cooling system cleaner, and idle the ** rolling motor for 30 minutes (or follow the instructions on the detergent bottle);

    Fifth, turn off the engine and let it cool for 5 minutes. Empty the radiator of the liquid;

    Sixth, close the drain plug, fill the radiator with water, and let the engine idle for 5 minutes. The large dust source is then re-injected with 50 50 water and glycol antifreeze A mixture of coolant (the kind of coolant used in previous cars).

    Well, today's friends of the car maintenance side Xiao introduced so many places for cleaning the car water tank. I don't know if my friends know where to clean the car water tank after listening to Bian Xiao's introduction to car maintenance. I hope the introduction of car repair can be helpful to friends.

Related questions
40 answers2024-04-28

Your main upfront expenses are probably these.

Rent? (depending on the size of the geographical location). >>>More

16 answers2024-04-28

The car auxiliary water tank is an integral part of the engine cooling system, which plays a role in balancing the pressure of the water tank. The main function of the automobile auxiliary water tank is: when the engine temperature is high, the liquid expands, then a part of the antifreeze flows into the auxiliary water tank through the lid of the water tank; When the temperature drops, the cooling system pressure is negative, and the system sucks the antifreeze from the auxiliary tank into the cooling system through the tank cover. >>>More

9 answers2024-04-28

You can go to any of the stores and ask for a list of stores that are closer to you >>>More

21 answers2024-04-28

Automobile School is a subsidiary of China Oriental Education (parent company) under the education brand - Automobile Education, which is a national designated training base for automotive technical talents, a national automotive industry demonstration vocational education group, an executive director unit of China Automotive Vocational Education Group, a governing unit of the Society of Automotive Engineers of China, and a national demonstration base for the cultivation of automobile repair talents.

21 answers2024-04-28

Valve gelding, winter cars, especially after the use of unclean gasoline, the non-combustible gum in the gasoline will accumulate near the intake, exhaust valves and combustion chambers, which will cause hard starting, or even no fire in the cold morning. Emergency method: You can drop some oil into the combustion chamber, which can generally be started. >>>More