What should I do if the Huawei Band keeps showing that it is being reset?

When the bracelet cannot hear the sound, cannot connect to the phone, and fails to synchronize data with the Huawei Wear app, you can try to restore the bracelet to factory settings.

Calories in the bracelet.

Press and hold the side button for 2s to enter the information page, click the side button to cut the screen to switch to the factory reset interface, and press and hold the side button for 2s to start the factory reset.

Note: After the bracelet is restored to factory settings, the sports, sleep and time data on the bracelet will be cleared, and you need to re-pair and connect the phone when you use it again.

HUAWEI Band keeps showing that it is resetting, so you can try to connect it to your phone after it is fully charged, see if you can clear all the data, and look at the bracelet after clearing the monitoring, can it return to normal.

The HUAWEI Band keeps showing that it is being reset. The status of the bracelet before the list needs to be reset to restore the initial state.

Your situation should be that your bracelet is stuck, right?,It's not a big problem.,In general, it should be okay to restart it.,You can do it yourself.。

HUAWEI Band keeps showing that it is being reset, which means that there is a problem with the display screen, find after-sales and repair.

HUAWEI Band keeps showing that it is resetting, you can reset it once, then turn it off and then turn it on.

If the Huawei Band keeps showing reset it, then you reset it, and you can go to shut it down, restart it or set it up again.

What should I do if the Huawei Band keeps showing that it is being reset? It is estimated that there is a problem with the Huawei bracelet, you can bring the bracelet to Huawei after-sales inspection, if it is within the warranty period, it can be repaired for free.

The Huawei Band keeps showing up in the reset, and you can restart the band for this.

Summary. Hello dear, happy to answer for you; The steps are: 1. Uninstall the recently installed third-party software and eliminate the cause of system software conflict.

2. Take out the external SD card and test whether there is still restart. 3. Update the system version of the mobile phone and try to see if there is any improvement. 4. Back up your phone's data (**book, SMS, **, etc.) and restore your phone to factory settings.

5. Take the mobile phone to a professional repair point for maintenance.

Hello dear, happy to answer for you; The steps are: 1. Uninstall the recently installed third-party software and eliminate the original cause of system software conflicts. 2. Take out the external SD card and test whether there is still restart.

3. Update the system version of the mobile phone and try to see if there is any improvement. 4. Back up your phone's data (**book, SMS, etc.), and restore your phone to factory settings. 5. Take the mobile phone to a professional repair point for maintenance.

HUAWEI Bracelet Feast 6 is a smart bracelet product released by Huawei on April 8, 2021. HUAWEI Band 6 has a total of 4 colors, respectively, Brother Lu is obsidian black, cherry pink, red tea orange, Qingshan Dai. It features an all-in-one AMOLED screen, weighs 18 grams, and is paired with a silicone strap.

Based on Huawei's fast charging technology, the HUAWEI Band 6 can be used for 2 days in 5 minutes, and can last up to 14 days in typical usage scenarios.

After restoring the factory settings of your Huawei Band, you need to set it up again, here are the steps:

1.First, turn on the Huawei Band, make sure it is fully charged, and make sure that the Huawei app of your phone is connected to the device.

2.Then, in the HUAWEI app, select your HUAWEI Band and go to the device details page.

3.In this page, find the "Factory Reset" option under "Device Control" and tap "Start". Next, your Huawei Band will perform a factory reset.

4.Once the restore is complete, go to the Device Control differential menu again and make sure that you have selected your device model correctly and that you have done the correct binding.

5.After that, you can go to the submenu and set the features you want to use, such as sleep monitoring, heart rate monitoring, step counting, etc.

It should be noted that a factory reset will erase all data from your device, please make sure that all data has been backed up, and **the latest software version to ensure the functionality and stability of your device.

Summary. The bracelet can be restored to factory settings, and it needs to be operated according to the specific model, taking the Honor Band Zero as an example, there are 2 ways to restore factory settings:

1.Factory reset via the bracelet. 1) Swipe the main interface of the bracelet to find it.

and click Enter;

2) Swipe the bracelet screen to find and tap the factory reset icon.

3) Tap on the bracelet screen.

Enter the band settings menu and click "Factory Reset".

How to use the Huawei Band after factory reset.

The bracelet can be restored to factory settings, it needs to be operated according to the specific model, taking the Honor Band Zero as an example, there are 2 ways to restore factory settings:1Factory reset via the bracelet.

1) Swipe the main interface of the pure ring to find the beam stool and click to enter; 2) Swipe the bracelet screen to find and tap the factory reset icon 3) Tap on the bracelet screen to find it. 2.Factory reset through the app, the version number starts with 15) Setup method:

The version number starts with 20) to set the method of calling for hail: 1) Open the Hefan Huawei Wear app, enter the Device interface, and click the Honor Band ZERO icon. 2) Click "Factory Reset" and click "OK".

After the bracelet is restored to factory settings, the sports, sleep and time data on the bracelet will be cleared, and you need to re-pair and connect to the phone when you use it again.

Hope it helps, dear.

Hello, the Huawei Band keeps restarting can be caused by a variety of reasons, here are some possible reasons and solutions:1The power is not enough:

If the battery level of the bracelet is low, it may cause the bracelet to keep restarting. At this point, you can try to connect the bracelet to the charger to charge it, and let the bracelet be fully charged before using it. 2.

Software issues: If there is a problem with the software of the bracelet, it may cause the bracelet to restart without stopping. At this point, you can try to restore the bracelet to factory settings, or update the firmware version of the bracelet.

3.Hardware issues: If there is a problem with the hardware of the bracelet, it may also cause the bracelet to keep restarting.

In this case, we recommend that you contact Huawei customer service or go to a professional repair shop for repair. 4.Other reasons:

In addition to the above reasons, the constant regrouping of the Jian-or Brigade bracelet may also be caused by other reasons, such as physical damage to the bracelet. In this case, we recommend that you contact Huawei customer service or go to a professional repair shop for repair. ☺

Hello, there may be the following possibilities: 1. The protection circuit in the lithium battery is too sensitive, so the current will be powered off as soon as it is large; 2. The battery of the sports bracelet itself has aged; 3. There is dirt in the metal sheet at the contact point of the battery, resulting in poor contact of the power supply; 4. The joint between the battery and the mobile phone is easy to loosen. Workaround:

1. If the first two problems are found after inspection, they should be sent to a special repair shop for repair; 2. If the latter two problems are caused by the dirty oxidation of the battery metal sheet, as long as it is wiped clean with a glue stick, the situation will be improved;

Summary. The reasons and solutions for the HUAWEI Band to keep turning in circles after upgrading are as follows:

The bracelet upgrade is still in progress. It is recommended to wait for the watch upgrade to finish, which is five minutes to half an hour.

There was a problem with the system update. It is recommended to go to the after-sales service for repair.

The Huawei Band 5 has been rotating in circles since the upgrade.

The reasons and solutions for the HUAWEI Band to keep turning in circles after upgrading are as follows:1The bracelet upgrade is still in progress.

It is recommended to wait for the watch to upgrade and turn to the shirt brigade for five minutes to half an hour. 2.There was a problem with the system update.

It is advisable to go to the after-sales service for maintenance.

So how to deal with it.

These are the two solutions above.

If your watch is still in the process of being upgraded, you will need to wait about half an hour.

See if the bracelet improves.

If you are still occupying, you need to get the offline after-sales service point and let the special maintenance personnel help you repair it.

This is the problem of the bracelet system.

If your Huawei Band is powered off, you can try the following methods:

1.Charging: The first stove needs to confirm whether the bracelet has power. Connect the bracelet to the charger and wait for a while before trying to turn it on again.

2.Force Restart: Press and hold the button on the side of the band for about 10 seconds until you release the button when the "Huawei" logo appears on the screen. At this point, the bracelet will automatically restart.

3.Factory reset: If the above two methods don't work, you can consider a factory reset.

Find the device in the Huawei Health app, select More on the device details page, and then select Factory Reset. Note that this operation will erase all data and configuration information, so please proceed with caution.

If none of the above methods solve the problem, we recommend that you contact Huawei customer service or go to a customer service point for repair.

Q: How do I do it when the HUAWEI Band is turned off? : If the Huawei Band is turned off, you can try the following methods:

1.Charging: Connect the band to the charger and plug it into a power outlet, wait for a while before trying to turn it on.

2.Restart: Press and hold the button of the bracelet until the Huawei logo appears on the screen, release the button, and wait for the bracelet to restart.

3.Factory reset: Press and hold the button of the band until the words "Factory Reset" appear on the screen, release the button, and follow the prompts.

If the above methods still do not solve the problem, we recommend that you contact our customer service or go to the after-sales service center for help.

Dear Glad for your question HUAWEI Band keeps showing reset, When the bracelet can't hear the sound, can't connect to the hand judgment machine, and the synchronization data with the Huawei Wear app Huawei Health app is missing and missing, you can try to restore the bracelet to factory settings. Press and hold the side button on the calorie interface of the bracelet for 2s to enter the information page, click the side button to cut the fiber to call the screen to switch to the factory reset interface, and press and hold the side button for 2s to start the factory reset. Description:

After the bracelet is restored to factory settings, the sports, sleep and time data on the bracelet will be cleared, and you need to re-pair and connect the phone when you use it again. I hope mine can help you <>