What should I do if the meter speed is abnormal?

How to check if the electricity consumption is obviously excessive:

1. Pull down the main switch under the meter, and the meter should be stopped, otherwise there is a problem with the meter.

2. Find leakage after confirming that the meter is normal: unplug and turn off all electrical appliances, and use the multimeter RX10K file to measure the resistance of the live wire to the ground wire and the live wire to the neutral line of the main switch, if the resistance value is infinite, it indicates that the line is intact and does not leak. If there is a leakage resistance value in the measurement, indicating that the line is leaking, it is necessary to disconnect each branch one by one to find it in sections, and the common leakage parts are:

Toilets, wet parts of the kitchen, wires, switches, sockets. High-power switches, sockets, wire connectors. The wire is bent and moves.

Scratch area. 3. If the circuit is in good condition after testing, finally use the multimeter RX10K file to check whether the insulation of the electrical plug wiring to the metal shell is good, and focus on checking the electrical appliances that come into contact with water such as washing machines, water heaters, etc.

If the customer has any doubts about the accuracy of the meter or the electricity charge, he should first pay the electricity bill in full, and then apply to the power supply department for the validity of the meter or find out the reason for the doubtful electricity charge. If the meter is indeed inaccurate (beyond the calibrated range), the power department shall add or reclaim the electricity to the user according to the actual difference. If the meter is indeed within the calibration range, then the user will have to bear the cost of the meter.

Sometimes we think that the meter is fast, and it is not necessarily a problem with the meter, it may also be a leakage at home, or someone steals their own electricity, or just feels faster than the original meter. All I can say is to be cautious, find out your reasons first, and then apply if there is no problem.

First of all, you need to check whether there is any leakage in your home. If not, you can find the power bureau to apply for the test of the meter, if it is indeed a meter problem, the power bureau will bear the meter and your electricity bill, if there is no problem with the test meter, then you will have to bear the cost of testing.

If the meter goes too fast, you can solve it by: testing whether there is leakage, saving power, changing the meter, and finding a professional to monitor. If you suspect that the meter at home is going fast and there is a problem with the meter, then you need to check the meter, and you can go to the power supply company to check whether the meter is abnormal.

The meter is going too fast and can be solved by the following methods:

1. Test whether there is leakage: This is a must-do, once the leakage is not only the meter goes fast, but also there is the possibility of danger. If you don't know how to operate it yourself, call someone from the power supply company to help, so it's safer.

2. Try to save electricity: how to use electricity on weekdays, start to use as little as possible this month, so deliberately save electricity and then take a look at the meter, if you go very fast, then find the power supply to deal with it, this is a problem of the power supply.

3. Change the meter: After replacing a new meter, the meter will return to normal. You can contact the staff of the power supply station to buy a new meter and replace it, which is generally not a big problem.

4. Find a professional to monitor: If you change the meter with a new meter and confirm that there is no leakage at home, then you must find the relevant local departments to complain, and then there will be professionals to check at the door.

There are three main reasons why the meter is going too fast, and it is necessary to investigate the three aspects of line leakage, high-power electrical appliances and meter abnormalities. For the current home meter to go fast, carefully judge whether the meter suddenly goes too fast, or usually goes too fast, if the home leakage then find an electrician to solve, if the meter is abnormal, then find the power supply company to solve it.

How to solve the problem that the meter is going too fast? Hello dear, I'm honored to answer for you. The information you have found here is:

1. Check whether the electrical appliances consume electricity, and turn off all electrical appliances of large and small power in the home, including the socket switch. If the meter is going very slowly at this time. That means that the electrical appliance forgot to turn off and has been running at a higher power.

In the face of this situation, we only need to turn off the electrical appliances that we forgot to turn off, and remember to turn them off next time we use them. 2. Check whether the circuit is leaking, if all the electrical appliances are turned off and the meter is still going fast, then it is necessary to check whether the circuit is leaking. Inspection method: The insulation resistance of the circuit in each area can be detected with a clamp meter.

Especially in bathrooms and kitchens that use a lot of water, it is necessary to focus on testing. If the insulation resistance is too low, it proves that there is leakage in the line. In this case, it is necessary to replace the line with the insulation resistance as soon as possible.

3. Check whether the meter is abnormal, the current meters are all smart meters, sometimes the meter is not calibrated, or the meter error will also cause the meter to be abnormal. Under normal circumstances, if all the electrical appliances in the home are turned off, there is no leakage in the line. Then you have to wonder if this is the case.

In the face of this situation, we should call the service of the power grid company as soon as possible** and let the power grid company arrange for an electrician to check the meter. If it is indeed a problem with the power company, they will take care of the repair and refund the corresponding overcharged electricity bill. According to different phenomena, we can judge where the problem may occur, and finally solve it in a targeted manner.

Summary. If you suspect that the meter is going too fast, you can take the following steps: Check your electrical equipment:

First of all, check whether the electrical equipment at home is normal and whether there is any abnormal situation, such as aging, damage, etc. If there is a problem, replace or repair it in time. Check the meter:

You can observe whether the readings of the meter match the actual electricity consumption, or ask a professional to check whether the meter is normal. Contact the power department: If you still suspect a problem with your meter, you can contact the power department to check and repair it.

Saving electricity: Saving electricity is a good habit regardless of whether there is a problem with the meter.

If you suspect that the meter is going too fast, you can take the following measures: Check the electrical equipment: First check whether the electrical equipment in your home is normal and whether there are any abnormal conditions, such as aging, damage, etc.

If there is a problem, replace or repair it in time. Check the meter: You can observe whether the reading of the meter is consistent with the actual electricity consumption, or ask a professional to check whether the meter is normal.

Contact the power supply department: If you still suspect a problem with your meter, you can contact the power supply department for inspection and repair. Saving electricity:

Regardless of whether there is a problem with the meter, it is a good habit to save electricity.

There are many dials in the community, how to recognize the gate knife of your own home.

If there are multiple dials in the community, you can follow the steps below to recognize the gate knife of your home: Find your own meter: First of all, you need to find the meter of your own home, which can be confirmed by looking at the number or address on the meter.

Observe the gate knife next to the meter: After finding the empty meter in your home, you can observe the gate knife next to the meter, usually the gate knife will have a number or logo, which can be compared with the number on the meter to confirm whether it is your own switch. Open the blade cover:

If you can't confirm the number or identification of the blade, you can open the blade cover plate and check whether there is a wire connection to your home on the blade to confirm whether it is your own knife. Ask a professional for help: If none of the above methods can confirm your own switch, you can ask a professional to help, and they will use professional tools to detect and confirm the switch.

Summary. Hello, your problem I have seen, please wait a moment, give me a little time to type, I will do my best to solve your problem.

Hello, your problem I have seen, please wait a moment, give me a little time to type, I will do my best to solve your problem.

1.Test whether there is leakage of household appliances, once the leakage not only the meter will go fast, but also there is a possibility of danger. If there is a leakage, you can repair the appliance.

2.If there is no leakage, first cut off all electrical appliances in the home and observe the speed of the meter. If you still know the rotation of the fast key code and the consumption of the draft for mold rolling increases, contact the power supply company for door-to-door calibration.

3.If the speed of the meter is not abnormal, you can observe for a period of time to reduce the electricity consumption at home, if the electricity is very large, print the electricity voucher first, and then contact the relevant department to check the door.

4.You can contact the staff of the power supply station to buy a new meter and replace it, which is generally not a big problem.

Precautions: 1. When using electricity, you must pay attention to whether there is leakage and electricity safety.

2. Many electrical appliances at home are in standby mode, which requires power consumption, and standby is not disconnected from the power supply. The computer and the road chamber file device can be closed in time when not in use.

3. It coincides with the arrival of the peak of electricity consumption in summer or winter, it is recommended to check the electricity consumption in the same period in previous years, and the gap may not be as big as it feels.

Do you have any other questions? I can go on and answer for you about Chirochi 3I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again.

Wishing you well; Have a good life, let everything go smoothly! 4.If you are satisfied with my service, please give a thumbs up, and once again wish you all the best!

Peace and joy, please give a compliment, I wish you a happy life, dear.

Please give a thumbs up, I will sincerely wish you good health, all the best, and a happy family.