How to prune spring flowers? How to prune

What do you want to cut? Look at the tree, follow the person's point of view.

1. Prune the mantra for spring: "Cut after flowering, leave a bundle (about 15 cm)".

2. The flowers for spring are distributed on the old branches of last year, so pruning should be carried out after flowering, otherwise the flowers will be cut off.

3. After flowering in spring, it is necessary to leave about 15 cm of short pruning of old branches, so that more new branches (cut can be cuttings), and apply a rotten cake fertilizer or base fertilizer, and apply manure every half month in the growing season. Then remember to add some phosphorus and potassium fertilizer in the later stage of growth, so that after pruning, you can promote more strong branches.

The pruning of spring flowers is very important, which determines how many flowers open in spring, generally when the flowers wither within 10 days, in addition to the withered, diseased branches need to be cut off and the old branches also need to be cut off, to avoid consuming nutrients in vain, because the old branches will not bloom again, but also pay attention to the branches that seem to be densely distributed also need to be cut off, which helps to germinate new branches.

In order to avoid the new branches only care about the growth of too long, so generally in May to July when the heart needs to be plucked 2 to 3 times, when the topping, only need to keep the next two pairs of buds, of course, also depending on the specific situation, for the growth of weaker branches to less topping or no topping, through this method can make the tree shape more beautiful, while promoting the branching flowering.

If you want to prune the spring flowers, you can do it when the spring flowers are withering, when pruning, you need to cut off the withered branches and leaves, and you need to provide nutrients for them after pruning, you can use nitrogen fertilizer fertilization, fertilize every 10 to promote the finch bush to make the spring flower buds quickly form flower buds and bloom in the next spring.

1. Pruning method

If you want to prune the spring flowers, you can do it when the spring flowers wither, and when pruning the spring flowers, you need to cut off the withered branches and flowers to save nutrients for the spring flowers, and you also need to keep 2-3 flower buds on each flower branch, which is conducive to the next flowering of the spring flowers.

2. Provide nutrients

After pruning, you need to provide nutrients for the spring flowers, you can use nitrogen fertilizer to fertilize, prefertilize every 10 months, so that the plant has sufficient nutrient absorption, so that the flower language of the plant can quickly form flower buds, so that it can bloom in the next spring.

3. Provide light

After pruning, you need to provide sufficient light for the spring flowers, you can put the spring flowers in a sunny environment, let them receive no less than 6 hours of natural light exposure, so that the plant can resume growth as soon as possible.

4. Precautions

When pruning the spring, the pruning tools need to be disinfected to avoid pruning, resulting in the infection of bacteria in the spring, and after pruning, the wound also needs to be treated with anti-virus and sterilization to prevent the plant from being infected with germs in the process of recovery.

After the spring flowers are gone, the residual flowers should be removed in time, and then some old branches should be cut off, and the buds should be pruned during the growth period, and the top of the branches that grow faster should be cut off to prevent the growth from being too long.

After the annual spring flowers are gone, the residual flowers should be removed in time, the flowers that are lost have no value, and they will only waste nutrients on the branches, after the end of the flowering period, you can cut off some old branches that have grown for a long time and have ceased to bloom, and such branches will not continue to grow.

How to prune the spring flowers in the growth period, the spring flowers in the growth period should be topped, and the top buds of some fast-growing branches should be cut off to prevent the growth from being too long, and it can also promote the rapid growth of other slower branches, and the buds can be picked repeatedly 2 3 times.

Before the spring flowers enter the winter dormancy, the branches and leaves fall, and a weak branch pruning is needed to prune the diseased branches and weak branches of the spring flowers, which can not only save nutrients, but also reduce the occurrence of diseases.

As an ornamental potted plant, ornamental is also very important, modeling pruning can make the spring flower plant more beautiful, more ornamental, but also to increase the number of the next flowering, modeling pruning will first cut off the long branches and dense branches, and then cut into the desired shape according to preference, in the peak growing season, the spring flower can recover the wound faster.

The methods of pruning spring flowers include branch pruning, topping, pruning of weak branches, modeling pruning, etc.

1. Prune the branches

The pruning of spring flowers is very important, which determines how many flowers open in spring, generally when the flowers wither within 10 days, in addition to the withered, diseased branches need to be cut off and the old branches also need to be cut off, to avoid consuming nutrients in vain, because the old branches will not bloom again, but also pay attention to the branches that seem to be densely distributed also need to be cut off, which helps to germinate new branches.

2. Perform topping

In order to avoid the new branches only care about the growth of the long so that it is too long, so generally in May to July when the heart needs to be plucked 2-3 times, when the topping is carried out, only need to keep the next two pairs of buds, of course, depending on the specific situation, for the growth of weaker branches to less topping or no topping, through this method can make the tree shape more beautiful, while promoting the branching flowering.

3. Pruning of sick and weak branches

Before the spring flowers go dormant in winter, the branches and leaves fall off, and a pruning of the sick and weak branches needs to be carried out, and the diseased branches and weak branches of the spring flowers are cut off, which can not only save nutrients, but also reduce the occurrence of diseases.

4. Modeling pruning

As an ornamental potted plant, ornamental is also very important, modeling pruning can make the spring flower plant more beautiful, more ornamental, but also to increase the number of the next flowering, modeling pruning will first cut off the long branches and dense branches, and then cut into the desired shape according to preference, in the peak season of growth, the spring flower can recover faster and change the mouth.

Points to note after pruning spring flowers

After pruning, it is necessary to provide appropriate water for the plant, and after waiting for the plant to regain its vitality, it can provide the right amount of nutrients for the plant, supplement the consumption of the plant in the flowering period, and at the same time, it is best to use more nitrogen fertilizer when fertilizing, and provide the fertilizer to the plant after dilution, so as to improve the growth rate of the plant.

In the pruning process, it is necessary to pay attention to the disinfection and sterilization of filial piety. Generally, the pruning tools need to be disinfected and sterilized before pruning, so as to avoid the plant being stained with bacteria and causing diseases during pruning, and at the same time, the pruning wound of the plant needs to be disinfected and sterilized after pruning, so as to avoid the bacteria in the air infecting the plant and causing the plant to fail to grow normally.

Spring flowers can be pruned to adjust the tree's momentum, can save nutrients, is evenly distributed branches, beautiful plant shape, and most importantly is conducive to flowering. The time and method of pruning spring flowers is a key part of raising spring flowers.

Within 10 days of flower decay, the flower branches are pruned, leaving 2 3 flower buds per flower branch.

After pruning, nitrogen fertilizer was applied twice every 10 days to promote the growth of new shoots. When the new shoots grow to 15 cm, apply phosphorus fertilizer again 3 times, once every 7 days. It can promote the formation of flower buds and bud flowering.

Note: The flower buds of spring flowers are formed on the branches of the first year, and should not be pruned in autumn and winter. Pruning in autumn and winter will cut off the flower buds that form in the summer, resulting in the inability to bloom.

The pruning of spring flowers is mainly divided into modeling and root pruning. Here are the specific pruning tips:

When planting, the basin has sufficient base fertilizer, and the water and fertilizer are raised until mid-July, and the pruning is just right. Control watering after pruning and water after seeing the leaves roll. Apply phosphate fertilizer twice in September, and normal maintenance in October.

In November, you should ensure sufficient sunshine, prune again after seeing the flower buds in January, and the branches should be about 10 cm when flowering, and the flowers and branches should be full.

It is usually pruned twice, once in the spring after flowering, and again after a period of growth. In order to ensure the beauty of the shape, in late March and early April, the side buds can be shortened, and after the side buds are grown, a little bit of the side buds can be removed.

If it is not pruned or truncated for a long time, the branches and leaves will be sparse, and the flowering will gradually decrease, which will affect the appearance.

Cut off the buds of the spring flowers to promote the second flowering of the plant. 3. Branch pruning: During the growth of spring flowers, it is necessary to cut off all weak branches, diseased branches, dead branches, long branches, and over-dense branches of clear oak.

4. Precautions: The tools for pruning the spring flowers of Yinglu liquid need to be disinfected, and the nutrients need to be supplemented appropriately after pruning.

The growth habits of spring flowers

Spring flowers are suitable for growing in loose, fertile and breathable sandy soil, and an appropriate amount of base fertilizer can be applied to the soil before planting, and the soil can be disinfected.

Spring flowers like a warm growth environment, its suitable growth temperature is about 15, when the outside temperature is too low, need to do a good job of protective measures.

Spring flowers like light to answer the side, avoid strong light, insufficient light will cause the leaves of the plant to grow, daily maintenance in the astigmatism irradiation can be.

Spring peanuts need to be applied twice a month for a long time, and an appropriate amount of phosphorus and potassium fertilizer needs to be applied before flowering, and the fertilizer concentration should not be too high.