The laptop can t connect to other networks

Summary. Hello, the specific handling method of your own laptop cannot be connected to your home is as follows:

1. Check whether the wifi switch on the computer is turned on. Some computers will have 2 switches, one on the side of the computer, one through the keyboard to achieve the switch, generally if these two switches are not turned on, the wireless network will display the X number, after confirming that both switches are on, try to connect to the Internet again.

2. Check the wireless network card again. Right-click on my computer - Device Manager - Network Adapter to see if the network card driver is good.

4. If there is no problem with the above, and you still can't connect to the wifi network, then you can re-enter the wifi password to try to connect. This is done by right-clicking on the wireless network signal - Properties. Then re-enter the password and connect again.

6. After that, click Manage Wi-Fi.

7. Then, the name of the wifi signal that the computer has been connected to before will be displayed here.

8. Right-click on the wifi signal name to delete the network.

9. Then the network will be deleted from your computer, you can search for the wifi signal again, and then enter the password to try to connect.

Why can't my laptop connect to my own network?

Hello, the specific handling method of your own laptop cannot be connected to your home is as follows:

1. Check whether the wifi switch on the computer is turned on. Some computers will have 2 switches, one on the side of the electric service Yuanxin's brain, one through the keyboard to achieve the switch, generally if these two switches are not turned on, the wireless network will display the X number, after confirming that these two switches are in the open state, the old wheel tries to network again.

2. Check the wireless network card again. Right-click on my computer - Device Manager - Network Adapter to see if the network card driver is good.

3. If the wireless mountain stove network card is not enabled or the driver is not installed, enable the wireless network card or install the wireless network card driver.

4. If there is no problem with the above, and Dajin Town is unable to connect to the wifi network, then you can re-enter the wifi password to connect and try. The method is to right-click on the wireless network signal - properties. Then re-enter the password and reconnect again.

6. After that, click Manage Wi-Fi.

7. Then, the name of the wifi signal that the computer has been connected to before will be displayed here.

8. Right-click on the wifi signal name to delete the network.

9. Then the network will be deleted from your computer, you can search for the wifi signal again, and then enter the password to try to connect.

Reset the network.

Press win+r on the desktop to enter cmd and click OK to open the command prompt window, win10 press win plus x to open the command prompt directly, enter in the command prompt, netshwinsockreset, later, there will be a successful prompt, successfully reset the winsock directory, restart the computer to complete the reset.

Before 1999, a network was generally considered to be a random structure of a network consisting of a number of nodes and links connecting them, representing objects and their interconnections.

Hello dear! We'll be happy to answer your questions! If you can't connect to the wireless network, you can check it by following the steps below:

1. Confirm whether the wireless function is turned on, and turn the wireless function on or off through the shortcut key (hotkey) 2. Confirm whether the wireless network device in the device manager starts abnormally -- > the console -- > the device manager and view"Network adapter"Whether there is an exclamation mark in the figure below is a normal network card, and an exclamation mark in the red box is an abnormal network card If an exclamation mark appears on the device, you can first go to the official website**The latest network card driver and install it. 3. Open the Network and Sharing Center for troubleshooting There is no exclamation mark in the Device Manager, which means that the network card should be normal, and the problem may be caused by system settings or other network devices Start--> Control Panel--> Network and Sharing Center, enter the Network and Sharing Center, and you can see the basic network information If there is an exclamation point or X, you can click to execute the built-in network troubleshooting in Windows 4. Restore the network settings to the default value Start--> search program and file input"cmd"And press enter, click cmd, execute netsh winsock reset, and press enter, you need to restart the computer <>

Summary. Hello, dear. <>

I'll answer that for you. Please wait a minute.

The laptop can't connect to the network.

Hello, dear. <>

I'll answer that for you. Please wait a minute.

1.Open the Windows Settings window of your computer and click on the Network & Internet option.

2.Open the Network & Internet window interface and click Change Adapter Options.

3.Open the network connection window, select the network adapter in the options, and then right-click to open the options, and click Properties.

4.After opening the WLAN dialog box and selecting the Network tab, click on the Internet Protocol version 4 option in the list of items used in this connection.

5.Open the Internet Protocol version 4 Properties dialog box and select the General tab and select the Get IP address automatically option.

6.Then click the OK button in the dialog box and finally restart the computer.

Dear, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood! <>