If you want to ask a friend who knows about routers, please come in and take a look?

Personally, I feel that the signal is definitely not strong when you put the third floor on the first floor, and it is better to put the first floor than the third floor, because the transmission ability of the signal antenna downward is a little weaker than upward. Of course, it is best to put it on the second floor. And the Tengda N300 is still quite weak, and Mercury's gives me the feeling of average stability.

You can try the current Huawei, Honor and other smart routers. Try to place the router on the second floor.

The signal strength of the router is not directly related to the size and number of antennas, but it is related to the transmitting power of the router.

It's definitely going to improve. However, the following ones are more cost-effective.

d191gac2100

7660 Gigabit Edition.

The router is on the third floor and your signal is very weak on the first floor, this is a normal thing, don't say buy a router with four antennas, you are buying an octopus with eight antennas, your signal on the first floor will not improve, the best way is to solve the problem of weak signal by sending a network cable from the optical cat to the router on the first floor.

Antenna sensitivity is very important, the location of the router is also important, the antenna sensitivity and how many antennas have nothing to do with it, and the transmission power of the reason device has been limited, and the multi-antenna equipment on the market is just cool, the antenna design of many devices is not strictly detected, and the effect does not reach much theoretical data. Slightly more penetrating than 5G. So I think you can buy a slightly more expensive router in the upper middle level, and try it out with a longer antenna.

Whether there is a good signal or not also depends on the location of your router and the material design of your house, good luck.

The router feels like a more complicated thing, and this kind of thing is generally of interest to men, but may not be so interesting to women.

The router is on the first floor.

Routers now have gigabit, high power, strong ability to penetrate walls, your 300 is too small, it should be replaced, Mercury router, is a very good brand, quality assurance is no problem, it should be much stronger than the previous one, but it is best to install the router on the second floor, so that the signal will be strong up and down the stairs, and it will be much better than if you put it on the third floor.

The router is the router used for broadband, and only with the router can you receive network information, if you want to install broadband at home, you need to use the router.

This is the router where broadband is installed.

The router is a kind of network equipment, its function is to connect a broadband to the home, if there is no it, then you can only connect a network cable from the broadband cat to a computer to use. Well, with a router, you can connect multiple computers and use a single broadband network at the same time.

It is to transmit the network transmitted by wires in the form of electromagnetic waves, that is, wifi, but the propagation distance is limited.

bia.Refers to the MAC address, which is an identifier solidified into the network equipment by the manufacturer, which is fixed, and the first one can be changed, but the BIA cannot be changed.