How to sew handmade books, how to sew thread bound books

Awls, cotton threads, coarse needles. Tie the hole, thread the thread, and finally punch the knot in the hole and cut the thread end. Come to an end.

You can start at the top of the spine and thread the two threads down in turn like tying a shoelace, and finally knot in the bottom hole. The paper should be neatly clamped with a clamp and then punched, and the poor technology is easy to make the hole skewed, so the line should be drawn first (try not to see the line), point hole. Finally, I will tell you that modern machine-made paper is too brittle and hard compared to ancient high-quality paper (not top-of-the-line).

It is very uncomfortable to look at the bound book, so leave enough white space close to the grating line according to the thickness.

The processing process of wire-bound books is as follows;

Material, folding, page matching, checking and arranging, flattening, column punching, piercing paper nails, gluing covers, matching books, cutting schoolbag corners, compound mouths, punching and threading, stapling, thread-bound books.

Sticky signature strip Print the root word.

Piercing the needle. After the book is equipped with full columns, the manager checks that it is correct, and then drills and threads the paper nails to ensure that the pages do not move and the columns are neat.

The paper needle eye is hit in two, and the upper and lower positions are 1 3 places in the length of the book, 6 9mm from the spine. The hole is vertical, no cracks, and the diameter of the needle eye is subject to the ability to enter the needle and thread.

The paper is made of the same material as the paper of the booklet, and the vertical pattern is used. The needle should be crisp, firm, and have a diameter that matches the eye of the needle.

1. Arrange the pages of the bucket digging book and clamp the two sides with small clips.

2. Use a ruler to draw the perforation position and keep it in a row with equal distances. Empty focalclei.

3. Use a hammer and nail to pierce the painted position.

4. Sew from the beginning after piercing the hole.

5. After sewing the upper left corner, it can be sewn alternately in turn.

Thread-bound books refer to the type of books bound by thread, also known as ancient thread-binding, which is an important invention of the ancient Chinese working people. Ancient Chinese paper books went through two stages: scrolls and albums. The scroll is assembled from a roll, a scroll, a thread, and a belt.

1. Straighten the pages and clamp both sides with small clips.

2. Use a ruler to draw the position of the perforation, keep it in a row, and the distance is eliminated.

3. Use a hammer and nail to pierce the painted position.

4. Sew from the beginning after piercing the hole.

5. After sewing the upper left corner, sew it alternately anyway.

Thread-bound books refer to the type of books bound by thread, also known as ancient thread-binding, which is an important invention of the people of ancient China. Ancient Chinese paper books went through two stages: scrolls and albums. The scroll is assembled from a roll, a scroll, a thread, and a belt.

Materials required: non-woven fabric, scissors, needle and thread, brushes, white paper.

1. Cut the non-woven fabric of different colors to the same size as the cover and sandwich page of the cloth book.

2. Decide on the theme of the book, which can be numbers, letters, fruits, animals, etc.

3. Draw the outline of the pattern you want to make in the clip on a piece of white paper, take out a piece of non-woven cloth of the corresponding color, put it behind the white paper where the pattern is drawn, and use scissors to cut out the corresponding outline of the paper and the non-woven cloth together.

4. Sew the cut non-woven fabric pattern on the clip page with a needle and thread, in order to highlight the pattern to look better, you can use a black pen to outline the corresponding outline.

5. After all the clips are done, sew each two clips together with needles and threads (need to be sewn on the top, right and bottom sides), and then sew all the pages with the cover like a bound book.

The practice of handmade books.

Material preparation: A4 paper, glue, scissors, coloring pen.

The steps are as follows: 1. Take 1 piece of white A4 paper and divide it into 4 horizontal equal parts and cut it into 4 long strips.

2. Fold each strip of paper in half, then in half, and three in half along the length direction to fold it into a small rectangle.

3. Reopen all folded notes.

4. Take any 2 strips of paper, and glue together the last grid of the previous one and the first grid of the next one. Connect 4 strips of paper into a long strip in this way.

<>6. Spread the long strip of paper flat and apply glue on one side.

7. Arrange the paper strips into a stack according to the original creases. Because one side sticks to the other side and opens on the other, it forms the shape of a book.

8. Take another piece of A4 paper of different colors to make the cover, fold it in half along the two middle lines, and cut off a quarter for use.

9. Fold a quarter of the rectangle in half longitudinally to find the midpoint of the two narrow sides. Fold the right side inward until it is about 2mm away from the midpoint.

10. Fold the left side in the same way to a distance of 2mm from the midpoint of the narrow side, so that the paper becomes a slender strip.

11. Fold one end of the slender strip (end A) upwards until it is 2mm away from the other end (end B).

12. Fold the B-end to 2mm away from the A-end.

13. In this way, the part between the two broken lines (the shaded part in the upper right picture) is folded as the spine.

14. Align the spine of the inner page of the small book with the spine of the cover, so that the cover wraps the inner page.

15. Fold the cover inward to wrap the first page. The back cover also folds inward to wrap around the last page.

16. Insert the first and last pages into the mezzanine of the front and back covers respectively.

17. A beautiful and complete little book is ready.

Here's how:Material tools required: cardboard, scissors, double-sided tape.

1. Cut three rectangular pieces of paper with a side width of 4cm.

2. Fold them in half 2 times in a row.

3. After that, open it and fold it backwards.

4. Take a piece of colored cardboard and cut it into a long strip with a side width of 4cm.

5. Fold the color cardboard in half at both ends and paste double-sided tape in the middle.

6. Fold the white paper on the front and back and press it tightly in the middle with your hand.

7. Then use double-sided tape to paste the separated places, and then fold the two sides of the color cardboard inward to the side.

8. Write a written picture on the cover.

3. All Material Tools:

Needles and threads, nails, hammers, pages.

Production steps: 1. Arrange the pages of the book and clamp both sides with small clips.

2. Use a ruler to draw the piercing position. Keep in a row with equal distances.

3. Use a hammer and nail to pierce the painted position.

4. Sew from the beginning after piercing the hole.

5. After sewing the upper left corner, sew it alternately in turn.

6. Sew to the end and then back to the seam, and sew the line where there is no thread.

7. Sew to the beginning and knot the beginning of the thread.

8. A thread-bound book is sewn.

Rolex Cellini 18K gold case, sapphire glass, natural mother-of-pearl check. K gold index, K gold scale black glossy hand-stitched South American alligator belt, 18k gold buckle diameter 32mm, thickness 6mm, weight 40gLife waterproof, hand-wound, in-house movement.

Accessories: insurance policy, internal and external combination, manual, tag, handmade edge wipe cloth. Pricing:

HK$32,900.

Many of some party documents are like this.

That's what happens when it's done.

Before. As for now, it may turn into an artistic design. I think if it goes on.

The female red network may have oh, you go and see.

Use a thick thread, that is, the kind of thread that is thicker than ordinary needle thread, which is generally white, with a bit of twine, and then use a special awl, which is also a thicker kind, so that the sewn book is strong and durable. If you don't have it or the book is not very thick, you can also use ordinary needles and threads, even those thin ones, but it is better to make two or three strands like that, that is, fold the thread so that one thread becomes two threads, so that the sewn book has 4 threads through, which is also good. How to thread:

Fold the thread into two strands and pass it through the holed end of the needle, then pull it long enough, cut it, pinch the cut end and wrap it around with your index finger a few times, then use your thumb to push the coil out of your index finger (do not let go), pinch the whole pimple with your thumb and index finger and pull it to the end, so that the knot is tied. Then I have seen many kinds of sewing at one end of the book, one is sewn from one end to the other like a sewing cloth, and another is sewn from the left and right sides of the book, which is about a third point, and then pierces a mouth, and then uses this third point as a symmetrical point to pierce it at the other end, and then passes through these two mouths repeatedly; There are also sewn in from one end of the book and then around the other side of the book and then pierce again, each time with a needle on the same side, and then sew to the end, and then sew it at the other end, so that it becomes a cross; There is also the principle of piercing three eyes in the book, and then constantly passing through the rules of these three eyes, and making it look like a line from the outside. Of course, you can also create your own, how you think it looks good and how to sew I hope my answer can satisfy you. _^