How to set up a mobile phone to connect to WIFI with a network cable and wireless router?

Connect the network cable to the WAN port of the wireless router, and then set up the wireless router

First of all, reset the router initially, restore the factory settings (very important), and then connect the computer network card with the LAN port of the router with a network cable, and turn on the power of the router; PC NIC settings.

Enter the default username: admin and the default password: admin; Click OK.

1. Set up dialing:

Click Setup Wizard in the left rail, click Next;

Click on ADSL Virtual Dialing (PPPoE) and click Next;

Enter the bandwidth, password, and click Next;

2. Set the wireless wifi password

There is also an option on the left in the wireless settings, there is an SSID, this is your wireless, there is a password setting after setting, the password is as complex as possible, and it is best to combine alphanumeric symbols.

3. Set a login password.

Change the default admin and admin login passwords to prevent someone from breaking the password and rubbing the network to modify the router for you.

Click Save and restart, and you're done.

Through the above settings, you can connect your mobile phone to the router's wifi to surf the Internet.

Connect the wireless router to the computer, open the IE browser of the computer, enter most routers are this gateway, some will be different, you can see on the bottom of the router), after entering, the dialog box of entering the username and password will pop up, most of them are admin, and the bottom of the router is there. After entering, enter the router interface. Click on the setup wizard to set it step by step, note that the broadband pppoe and password must be your home.

After setting it up according to the wizard, save it, and restart the router.

Hello, the mobile phone is connected to the wireless signal of the router first, and then open this login address and enter the login password to log in to the management background of the router.

Target. Line connection router and setup steps:

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router.

Settings interface. (If you can't get in, please look at the nameplate at the bottom of the router.)

Or the router instruction manual, the default settings of different models of routers are different. ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Use Wi-Fi.

It is recommended that you use telecom broadband.

Thanks to China Telecom.

The servers and network erection are relatively perfect, and the servers and lines are constantly improving and upgrading every year, so China Telecom's network speed.

It is more stable, the network speed is better, and there will generally be no network congestion during peak hours, so it is a real exclusive broadband, so China Telecom's broadband is the best, and the cost will be relatively high.

China Telecom is the latest operator to open broadband services, and the technology is relatively mature, and other operators generally lease the backbone network of China Telecom, and the general telecom network is more stable than the broadband of other operators.

1. First connect the WAN interface of the router, and then you need to connect the mobile phone to the WiFi signal of the router, as shown in the figure below.

2. Open the browser in the mobile phone, enter it in the browser, open the management page and read this, and then set an "administrator password" according to the page prompts, as shown in the figure below.

3. At this time, the router will generally automatically detect the "Internet mode", and only need to set it accordingly according to the detection results. If it is detected that the "Internet access mode" is: broadband dial-up Internet access, you need to fill in your home's "broadband" and "broadband password" below, as shown in the following figure.

4. After setting up the Internet access method, then set the wifi name and wifi password of the road boy Qi Xun device, as shown next to the figure below.

5. Click OK to complete the setting, some routers may need to manually click the "Done" button.

1. Connect the mobile phone to the router wifi signal.

The prerequisite for opening the management page with a mobile phone is that the mobile phone must first be connected to the WiFi signal of this fast router. If the phone is not connected to the WiFi signal of the router, then no matter how you do it, you will not be able to log in.

Note: When you use your phone to set up a router, it has nothing to do with whether your phone can access the Internet. As long as the mobile phone is connected to the WiFi signal of the router, then you can use the mobile phone to open the router's settings interface.

2. Pay attention to the correct spelling.

Many people can't open their mobile phones because they make a typo when typing in the browser. For example, many users often type: falogincn, etc., and as a result, they cannot be opened.

3. Enter in the address bar of your browser.

Some mobile browsers have a large search box on the homepage after opening, uc, etc.). Many people type in the search box, and the result is definitely not able to log in to the page; Because the location entered in the browser is wrong, this mistake is made by many people.

The correct input position is the position displayed at the top of the browser.

Tips: If the router's wifi can access the Internet, after entering it in the search box of the mobile browser, a series of tutorials will appear, instead of the login screen of the fast router.

Fourth, the speed router itself is a problem.

If the above steps are operated and the operation is correct, the mobile phone still cannot open the management page; Most of the time it is caused by some problems with the fast router itself, unplug the power of this fast router, and after a few minutes, plug it in again, and then follow the above method to see if the phone can be turned on.

If you don't have a computer at home, you need to use Wi-Fi. At this time, we can use a mobile phone to set up, so how to set up a wireless network with a mobile phone for the router? I believe that many people are still not very clear, so I will introduce it to you below.

1. How to set up a wireless network with a mobile phone for a router.

1. Connect your phone to the wireless network you are about to set up. We can open the wireless network in the mobile phone settings to select, and click to connect.

2. We enter the login address of the router in the mobile browser, and then click to enter the page. Next, we enter the login password of the router to enter the settings interface. The login address of the router can generally be seen on the label at the bottom of the router.

3. After we successfully log in to the settings page of the router, open the wireless settings, and you can see that there is the wireless network name and password of the router.

2. What should I do if my phone can't open the router settings page?

3. What should I do if I forget my router login password?

If we open the page and forget the login password when logging in, we cannot enter the settings page. We can see below the router if there is a default login password, and if there is, enter this password. If there is no login password on the label, you can try to enter the wireless password to see if you can log in.

If none of the above methods work, you need to restore the factory settings.

To sum up, when setting up a wireless router with a mobile phone, the most important thing is how to log in to the router's settings page, as long as you log in to this page, you can set the wireless network name and password. I'm sure you already know how to do it. If you still want to know more about it, you can pay more attention to Qeeka Home.