Lenovo 7650 just added powder prompt cartridge error 5

That knob is reset and see.

If it doesn't work, it's broken.

**: Mingrui printing consumables store friendly tips.

There is a small scratch on the left side of the ink cartridge that has not been pushed up Lenovo printer The powder cartridge needs to be reset before it can continue to be used That is to say, it is cleared You look at a small piece on the side of the cartridge, and you have to push that one up,

Hello! In order to solve your doubts easily and quickly, the problem needs a professional engineer background query about the internal data, and then solve the problem through the machine confidence, it is recommended that you contact Lenovo after-sales, after-sales ** consultation:

Other questions can also be compared in these two forums, the idea forum, the think forum.

Hope it helps, thank you.

Lenovo 7216 printer bending and toner after adding toner also shows please change toner cartridge, this is because the printer's state is not updated in time, the specific solution is as follows:

1. First, click on the Device Manager option in the Start menu

2. Then you will enter a new window, find the name of the printer in the printing queue, and click on it:

3. After that, click on Devices and Printers

4. Delete the printer, which is only temporarily removed from the printing queue and will not cause any loss

5. Finally, add the printer to the print queue again, so that there will be no problem of prompting to replace the toner cartridge

1. If the ink cartridge is fine, turn off the printer, and then connect it again, sometimes because of some problems with the system.

2. Or you should pay attention to the location of the printer. If there is a problem with the location of the printer, it will not work.

3. If it doesn't work, just turn off the printer, then take out the cartridge and try to reinstall it. Not good, check the driver, reinstall the driver.

4. If the above problems cannot be solved, it may be that the metal sheet on the cartridge has not been used for a long time. If the contact is poor, the cartridge should be removed and wiped clean with an eraser. The metal sheet on the cartridge will glow. After reinstalling, there is usually no problem.

5. If the problem cannot be solved, it is necessary to consider whether the cartridge is damaged, and it is recommended to replace the cartridge.

6. It is recommended to contact professional maintenance personnel for maintenance.

Lenovo printer M7605D toner is still prompting to replace the toner cartridge after replacement, how to solve it?

Hello and a pleasure for you; Lenovo printer M7605D toner is still prompting to replace the toner cartridge after replacement, solution: 1. You can try to clear the printer to see if you can solve this problem; 2. Generally, there will be a [Clear Return] button on the control panel of the printer, after replacing the ink cartridge, don't close the lid first, press the clear button; 3. After pressing, a query will appear on the display screen to replace the toner cartridge, press the [Start] button, and then press the number button twice; 4. Generally, there will be relevant completion prompts, and the lid can be closed at this time; Hope mine can help you. Have a great day!

Lenovo printer M7605D prompts that the toner is exhausted and the solution to replace the toner cartridge is to remove the toner cartridge and add toner.

Steps:

1. Remove the two screws on the cover;

2. Confirm the position of each second round first;

3. After going to the next round, you will see a black powder cover;

4. Remove the lid and add toner;

5. Re-install the second wheel in the correct position;

6. Re-load the machine after installation.

What should I do if the Lenovo M7206 printer keeps showing replacement toner cartridge? Possible causes and solutions for replacing ink cartridges for M2706 printer:1

Adjust the position of the printer, if there is a problem with the placement of the printer, it will cause it to not work; 2.If that doesn't work, turn the printer off, then take out the cartridge and align it again. If it is useless, check the driver and reinstall the driver; 3.

If the ink cartridge is fine, turn off the printer and link it again; 4.If none of the above can be solved, it may be that the metal sheet on the ink cartridge has not been used for a long time, and the contact is poor, take out the ink cartridge, and then wipe it clean with an eraser, and you will find that the metal sheet on the ink cartridge is shiny. If you install it again, the general fault will be removed; 5.

If none of them can solve the problem, it may be that the cartridge is damaged and it is recommended to replace it. The first step is to open the front cover. Press the OK button for 3 seconds to prompt whether to replace the cartridge, ignore it.

In the second step, press the start button and then press the up button 11 times. Then press the OK button twice. It's ready to go!

Dear, this situation is most likely caused by the fact that you did not clear the printer, you can press the hail ruler on the control panel after replacing the ink cartridge [Clear Sleepy Sakura Return] button to perform the reset operation. 1. You can try to clear the source printer to see if it can solve this problem; 2. Generally, there will be a [Clear Return] button on the control panel of the printer, after replacing the ink cartridge, don't close the lid first, press the clear button; 3. After pressing, there will be a query on the display screen to replace the toner cartridge, press the [Start] button, and then press the number button twice4, there will generally be a relevant completion prompt, and the lid can be closed at this time.