How to check whether the wireless has rubbed the network, how to check whether there is anyone rubbi

1. Open a browser and enter the router address in the address bar. (Usually it is or 2, you can see that you need to enter a username and password in the pop-up window.) Here are a few commonly used usernames and passwords.

Generally, TP-link, fast and other popular brands of routers are mostly the same as the admin password and user name. There are also some routers that use guest. Of course, if it doesn't work, you can check the manual, which is the small note that came in the box when you bought the router.

3. When you successfully enter the routing management page, find "Wireless Settings" on the left side - Host Status. You can then see the number of hosts currently connected to it on the right. This refers to all wireless devices connected to this router, including your laptop, IPTV box, smartphone, tablet, etc.

I believe no one knows better than you how many devices use wireless wifi in your home. So if you find that the number is wrong, then you are rubbed into the net. Then it is recommended to change the wifi password of the wireless router immediately and restart the router.

Here's how:Device: Huawei laptop.

System: win7.

Software: 360 Browser.

2. Click Enter to jump to the router login page, enter the password and click the arrow below to log in.

3. On the page that jumps, you can see the number of "connected devices", if there is a device connected by someone who is not operated by you, it means that someone else is rubbing the network.

4. If you want to cut off other people's networking, you can click the right button of the device connection to disable the network, so that the connected device can no longer continue to use the wireless network.

2. After entering the address, the router login interface will pop up, if you have not changed the login password, the initial password of the general slim router is admin by default.

3. Enter the router management center and find [Wireless Parameters] - [Host Status]. In the host status, you can see the number of currently connected hosts, so that you can judge whether the network is rubbed. For example, if you have a total of 2 mobile phones at home, but it shows that 5 devices are connecting to your wifi, it is obvious that someone is rubbing your wifi.

The network speed has been very fast, but suddenly one day I found that the network speed has slowed down a lot, and the network is poor when I look at it, and the speed has dropped significantly, I believe that many users have begun to wonder whether it is their own wifi wireless network has been rubbed. The following is a method I have collected for you to check whether the wifi wireless network is rubbed against the network, I hope it can help you!

How to check if the wifi network is rubbed?

Enter the router background address on the browser page, the router background address is usually written on the router manual, generally "or", enter the user name and password, enter the operation page, click "DHCP server" to view the "client list", and all devices connected to the wireless router will be displayed. If you don't know the device, then your wireless network is being rubbed.

The DHCP server "view" the list of clients.

How to prevent others from rubbing the wifi wireless network

The tutorial takes TP-Link router as an example, and other brands of routers can refer to it.

1. Lengthen the wireless routing password

On the router's settings screen, go to the "Security" option and select the WPA-PSK WPA2-PSK password, which will allow you to create a password of 8-63 characters. Make sure the user's password is easy to remember but hard to guess.

2. Turn off routing SSID broadcasting

By disabling the SSID broadcast setting, people who rub the Internet will not find out your WiFi name. While wireless network efficiency will suffer, it's worth it in exchange for increased security.

3. Disable the DHCP function

If the SSID broadcast is disabled, you also need to disable the DHCP function, that is, the wireless router cannot automatically assign IP addresses to wireless clients. In this way, even if the other party can find the wireless network signal, they still can't use the network.

4. Change the default IP address of the router

Generally, the management address of wireless routing is to prevent users from easily guessing if it is modified to or other numbers.

5. Reduce the transmitting power

At present, some wireless routers have the function of adjusting the wireless transmission power, and the coverage of the wireless network can be controlled by adjusting the wireless transmission power. This will also prevent you from being rubbed online, as it will be difficult for the other party to search for your wireless signal.

6. Bind the MAC address

Find your Ethernet adapter MAC address, then find the wireless MAC address filter in the routing settings interface, and add your own MAC address, so that other devices cannot use the network without permission.

Here's how to check if the wifi is rubbed:Computer: Lenovo or Min Computer Tianyi 510s.

System: Windows 10.

Software: Microsoft.

1. Open the browser and enter the router settings**, as shown in the figure below.

2. Enter the administrator password and click to log in, as shown in the figure below.

3. In the interface that opens, click "Device Management", as shown in the figure below.

4. At this time, you can see all the devices connected to your own wifi, as shown in the figure below.

5. Check one by one, if you find a malicious device that rubs the network, you can click "Disable" below, as shown in the figure below, so that this device can no longer rub its own WiFi.

1. Behind the router, you can see a**, which can be used to log in to the wifi setting interface when the computer is connected to wifi. Then in the sticker at the bottom of the router, you can see the login address of this router.

2. Enter the settings page, you need to enter the administrator password, this password is generally admin at the beginning After the first entry, it will be changed to your own.

3. After entering the settings page, find the device management page.

4. You can see that there are several clever cherry blossom connections, which will be displayed on the computer and mobile phone.

5. If you find that someone is really rubbing the network, and you don't want him to rub it, you can directly click to disable, even if this IP has a password, or can crack the key wide and vertical password, it can't connect to your WiFi.

To find out if someone is rubbing your home's Wi-Fi, you can take the following steps:

1.Log in to your router's management interface. Typically, enter the IP address of the router in your browser (e.g., to access the admin interface. If you don't know the IP address of your router, you can check your router's manual or contact your network service provider.

2.Look for a list of connected devices or a similar option in the admin interface. This option may be located under the "Wireless Setup Booth", "Network Status" or similar tabs.

3.Check the list of connected devices to see if any unfamiliar devices are connected to your Wi-Fi network. Pay attention to the device name and MAC address, if there is a device you don't know appears in the list, it may be that someone is rubbing your Wi-Fi.

4.If you find an unfamiliar device, you can try to change the Wi-Fi password to block unauthorized access. In the router management interface, find "Security Settings", "Wi-Fi Settings" or similar options, and change the password.

5.Alternatively, you can enable the router's guest networking feature, so guests can use a separate network instead of connecting to your primary Wi-Fi network.

Keep in mind that it's important to secure your Wi-Fi network, as unauthorized access can lead to security issues and network slowdowns.