The wireless network is rubbed against the network, urgently, the wireless router is rubbed against

1. Log in to the router filter and fill in his MAC address, so that although he can search for your network, he can't connect. (If he's not very high-end and won't change his MAC address and can't access the Internet all the time), you can tell him that it might be a system problem with him.

2. Use the software P2P Terminator, this software is very powerful, you can define your own rules, limit the speed of the network he uses or disable P2P, ** tools. There are instructions on how to use it on the Internet.

3. If your router is a little more high-end, you can also set rules, for example, your router is, if you use DHCP to automatically obtain the IP address when searching wirelessly, then you can specify the IP range of your router's DHCP service, such as automatically obtaining it can only be between, and you can specify what the maximum speed of this IP segment is from the router, then he doesn't set his own IP, then there will always be only such a pitiful network speed. It won't affect you.

4. Set the frequency band of the router to only one use, that is, only one host can access the Internet, so that he can't access the Internet.

There are many ways,I'll provide these few useful points,Note that if you set it from the router, the router IP address and login password are best not to use the default and admin admin,Modify it yourself,Prevent him from logging in to your router to view the configuration,He will know that you don't want to give him Internet access。

Changed the name of the wireless cat and then there is a set of SSID broadcast to hide when you want to use it, you can check it by entering the name, and it is impossible for others to receive it without software at all.

It's good to use a network cable instead, or you can hide the signal in the offline software.

There is no way to do it.

What you're struggling with is slow internet speed, so you can find a speed-limiting software on the Internet to try.

Go to MAC address filtering – then add your own MAC address.

Then type ipconfig -all and you'll find it!

The signal can't be hidden. You just switch to wired networking.

1. Check whether the router has been rubbed on the network, you can open the browser to enter, press enter, and then enter the user of your router, as well as the password to log in, check whether there is an unfamiliar device in the corresponding menu, and the IP is inconsistent with the hardware, and it will be rubbed on the network.

2. Let the router speed modulation be maximized, the router is set to 75% rate at the factory, and you can enter the security setting to maximize the rate modulation of the router.

3. The location of the router is not very good, such as the corner of the wall and the dense place of items, which are the root causes of the signal quality.

The method of anti-rubbing is actually very simple, the main thing is that we are too careless, let people take advantage of the loopholes, and the following is divided into several steps to build our line of defense:

1. First of all, don't let those who rub the Internet find you, find the item Hide SSID (or allow SSID to broadcast), select "Yes", if it is in parentheses, then select "No", so that your wireless network will not appear in their search list.

2. The encryption authentication method (also called the security type) should choose WPA2-PSK, this encryption algorithm is currently the most secure, but some computers do not support this encryption algorithm, then you can only use WPA-PSK, which is better than WPA2-PSK compatibility, and the security is only a little worse, it will not have much impact, and some routes will add these two options together (WPA-PSK WPA2-PSK), which is more secure, just like an iron bucket, If you have the option of WPA encryption (or encryption method), select AES.

3. The password should be set up with a strong password, that is, a password of letters, numbers, and symbols, preferably not less than 20 digits, and there should be no easily confused characters such as: 0 or o, 9 or q in this password.

4. There is generally an access control or permission in the wireless, which can be set to allow and prohibit two ways, we now set it to allow, and then open the computer you want to use wireless Internet access, right-click on the desktop to select the properties of the online neighbors, right-click on the wireless network connection, click on the right-click properties, click "Configuration", enter the "Advanced" tab, there is a MAC address in the white box below, write it down, fill in the allow list of wireless routing, indicating that the wireless access rights have been opened to this computer, Others that are not in the table cannot be accessed, if there is another computer to connect to the wireless route, and so on to add to the allowlist.

5. The username and access password of the wireless router should be changed again to avoid being changed.

Do you have a password?

If you don't have one, set one up quickly.

If you set it to WEP, it will be almost impossible to crack if you change it to WPA.

The way a router restricts access to the network for surfers:

1.The system is connected to wifi.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the DHCP client page and view the host name. If an unknown username is found, it means that there is a user who is using the Internet, and the MAC address of the user is recorded.

4.Enter the router security settings interface, click MAC address filtering, and enter the MAC address of the surfer to restrict the network of the surfer.

Hehe, you can't solve such a simple problem? Use the router to play his other functions, the route is not just used to divide the line, well, into the settings, the things in the bar can be set up, there are many ways to restrict, you can see which one you are suitable for, such as: set the route, unlimited settings, cancel the wireless signal broadcast, so that others can not search for your signal, unless he knows your wireless ID, limit the IP of the route allocation, [such as restricting the route allocation IP to:

From the beginning to the end, that is, only 3 valid IPs are allocated, and then the IP address is restricted from binding to the computer MAC, that is, the IP of each machine on the intranet is fixed, so that it is useless for others to search for signals! If you want to play with him, you can also set it like this, go to the IP broadband settings, and then limit the connection speed of all IP addresses except the IP you bind to 1KB, so that he is cracking the password to connect to, and the speed is only 1KB, and it will not affect your Internet access, so that he can't figure out what's going on.

Teach you a bad trick, when you have nothing to do, enter the route to see his intranet IP address, and then use the computer intranet connection, send a gray pigeon over, and then be ruthless, send a panda to burn incense The original virus to him, and then you will slowly steal the fun.

A1When the mobile phone is connected to the router, the DHCP server of the wireless router will assign an IP address to the mobile phone, and it is through this address that the mobile phone establishes a communication relationship with the router, and it is also based on this address that the Internet can be accessed. So how do you find this address?

You first find the [Settings] of the mobile phone, then select [WiFi], and then look at the IP address of the mobile phone connected to the router, and the [Router] address is the login address of the router.

2.Once the address is obtained, the next step is to log in to the router. You can use a browser on your phone to log in to your router.

You enter the login address of the router into the browser, and enter the username and password of the router on the page to complete the login. It should be noted that when logging in, you need to know the login password of your router, in general, the default is admin, unless you have changed the login password before.

In that case, you can only restore the factory settings of the router, and then use the login password on the back of the router to go in and reset your network and wifi.

What to do if the wifi at home is rubbed by someone and the network speed slows down, a trick will teach you to remove the surfer.