Do you want to retake the four items after failing to reverse the library in subject 2?

Subject 2: Do you need to retake the four items after failing to reverse the car into the warehouse?

It is possible to correct the body。In practice, it is impossible to put everything in place, and it is up to you to correct it.

The principle of correcting the direction is subject to the rear of the car, the rear of the car wants to lean to the right, and Qi Wei quietly plays the steering wheel to the right.

The rear of the car goes to the left, to the left, and then to the opposite direction. Inverted inventory.

The correction direction should be about 1 meter in advance, otherwise when it reaches the storage angle, even if it is corrected, there is a possibility of pressing the line. The general principle is that it is better to play early than late, because you still have a chance to correct if you play early, and if you play late, then you will have to retake the test.

Amendment Principles.

After the direction is completed, the car looks at the right (left) rearview mirror before entering the warehouse, and finds that the line angle is getting closer and closer to the body, and the body is not parallel to the line, then we need to correct the direction.

To the far right. Left) After the sideline is exposed, keep the distance between the body and the corner of the library 30cm (as shown in the figure), and adjust the steering wheel less than 30cm back half a circle (the steering wheel is in a horizontal state). If you return too early, the right (left) side of the garage line will be too wide from the body after entering the garage, which means that the left (right) side of the car has been pressed into the line.

The angle between the line and the body is greater than 30cm (that is, the direction is early) to be rescued by half a circle: more than 30cm continue to kill the direction of the right, continue to move back, when the right rearview mirror library edge line is parallel to the body (as shown in the figure), the steering wheel is back to the right, adjust the high slag body of the dry car, and pour the warehouse into the bottom. If the body is still larger than 30cm, it may be that the steering wheel is slow when the rearview mirror is pressed to see if the line, and the next time it will advance or speed up the direction.

The method of account 2 is not put into the warehouse:

1. Hang the reverse gear, release the handbrake, slowly lift the clutch to semi-linkage, stabilize the clutch after starting, adjust the speed, and reverse backwards slowly; Look at the left rearview mirror, and when the right starting point sensing line appears on the lower edge of the left rearview mirror, the steering wheel will be killed to the right;

2, continue to move back, can not stop in the middle, while observing the right rearview mirror, first the left side line of the library appears, until the right side line of the library is exposed, keep the distance between the body and the corner of the library 30cm, (less than 30cm, quickly to the left half circle of the steering wheel adjustment, wait for a while, if it will also press the right corner of the library, the steering wheel needs to continue to return to the direction, until the right rear wheel of the car completely enters the library, at this time, the steering wheel should be full of direction to the right again, observe the left rearview mirror, when the body is parallel to the side line of the library, The steering wheel immediately turns to the left. Take turns looking at the left and right rearview mirrors, hit the steering wheel 90 degrees to the left or right, which side is far from the sideline, which direction to hit, how many times to hit, and adjust the distance between the two sides of the car body and the edge of the library to equal distance;

4. If the distance between the body and the library angle is greater than 30cm, you should continue to play the right full direction, observe the left rearview mirror, when the body is parallel to the edge of the library, the steering wheel immediately returns to the left direction. The body is still larger than 30cm, it may be that the steering wheel is slow to hit at 1 o'clock, and the next time it will be advanced or accelerated to hit the direction speed). After the rear of the car enters the garage smoothly, continue to move back, and when the edge line of the right rearview mirror garage is parallel to the body (as shown in the figure), quickly turn the direction back to the left.

Adjust the body, observe the flat condition of the body and the side line in the left rearview mirror to correct the direction, wide, to the left, narrow, to the right, (you can also look back to see if the center sign of the rear window and the center sign of the two rear rods are aligned, if the right deviation, to the left, to the left, to the right. Keep the direction after repairing.

The mentality of going to the examination room is too nervous, not suitable for the test vehicle, the clutch is released too quickly, the rearview mirror is not adjusted, the seat belt is not fastened, and the reverse car is put into the warehouse and forgets to hang the forward gear and go directly out of the warehouse. Don't pay too much attention to other people's exams, stay calm, and follow the coach's usual teaching methods to revise the physical exam process step by step according to the current situation.

Generally, when students arrive at the examination room, they will be nervous. This is normal. Let go of your mentality, treat it with a normal heart, treat the exam as a training ground, and take out the results of your usual training.

There are two chances, that is, 50% success, and it will not feel terrible if you don't fail in training.

Some students change cars and have to clutch hard to control them, and they panic for a while. In fact, all manual transmission car clutches have several situations, namely high and low, light and heavy. Some students said that they stopped as soon as they stepped on the clutch and let go too quickly.

In fact, when you release the clutch, don't go too fast, but release it slowly. When the car moves, it cannot be released again because this is the best joint for the car. At this time, I feel that the car is too slow, and I can step on the clutch gently.

The clutch was released too quickly during the exam, and it was too fast for a while. The heart was pressed to the end, and the brother stopped selling the car. When the heart is released too fast, the speed is uncontrollable, the heart is too panicked, and all the movements are twisted and wrong.

You should know it's fast. It's hard for you to control the slowness because cars have inertia. If you can't control it for a while, you can use the brake to help you, and then use the brake to drive easily, and then slowly release.

Millions of car purchase subsidies.

Second, why is it always bad to invert storage in a theme?

There are several reasons for not entering the warehouse, it may be that the starting position of the vehicle is too close to the sideline; It may also be that the body is not straightened and the tail is upturned; It may also be due to the poor timing of the steering wheel, sooner or later, etc. There are many reasons that can lead to the failure of a reverse warehouse.

In addition, there are still some differences in the way different coaches and professors of different driving schools enter the warehouse, and there are more reasons for not entering the warehouse. So, if there are no situations listed above, don't worry. Next, Bian Xiao will tell you how to deal with it.

Prevent falling into the warehouse.

The best way to solve this problem is to go to the library right away, and Pacific Auto provides two ways for netizens to prevent this from happening.

One: Stable mentality.

Second, it is normal for students to be nervous before subject exams. Students should learn to adjust their mentality and not bypass the nervous mentality to affect the operation of the exam.

Candidates can try to drink some sweet drinks, take deep breaths, change their thinking, close their eyes, and recall the operation process of reversing into the warehouse several times (see the picture above for the process of reversing into the warehouse)...

2.Prediction of reversing and warehousing.

In the vast majority of cases, by the time we find out that the vault is about to fail, it's already too late.

In this case, we must make sure that the operation meets the requirements before moving on to the next operation. For example, before the start of the test (before entering fingerprints), it is necessary to determine whether the body is sufficiently distant from the sideline and whether the body is straightened. Correct any problems you find, and then enter your fingerprints before starting the exam.

Interim remedies for the reversal of stockpiles:

There may be a variety of unexpected situations during the course of the Subject 2 exam. If the course of the car deviates from your expectations due to some factors, be sure to correct it immediately.

There is no way to hand over the specific correction method of reversing into storage to netizens, mainly because there are many problems and cannot be listed one by one. The best thing to do is to practice more and become more familiar with the car.

Millions of car purchase subsidies.