When the second subject is reversed, how to judge whether the body is correct or not?

Subject 2 when reversing, you can judge whether the body is back to the right by observing the rearview mirror, as long as the rearview mirror of the vehicle shows the rearview mark parallel to the body, the vehicle belongs to the back to the right state. After the car is put into storage, the driver looks back at the left side mirror, and when he sees the left side line of the entire garage appears, he immediately returns to the steering wheel, and stops immediately when he sees the left door handle and the bottom line of the garage from the left side mirror.

When reversing the warehouse to control the driving route test, the driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed, when reversing, to see the sideline, correct the direction in time, so that the car remains upright into the warehouse.

When the rear of the vehicle has been put into the garage, but the front of the car has not yet entered the garage, if the body has been tilted and the rear of the car is deviated to one side, then it is too early for the steering wheel to return to the right, or the speed of the direction is too fast. That is, the middle position of the rear of the vehicle and the middle position of the bottom line of the garage are not in a straight line before returning to the steering wheel.

When reversing slowly, first of all, through the rearview mirror in the middle, observe whether the middle position of the parking space and the middle position of the bottom line of the garage are kept in a straight line, and the range of left and right floating can be within 10 cm. If the deviation between the two points is large, it needs to be adjusted through the steering wheel in time to make the body always in a correct position.

Precautions for account 2 reloading.

Subject 2 reversing storage: library width = vehicle width + 60 cm, judging the direction of correction of 30 cm between the body and the corner of the garage is to ensure that after storage, the body and the edge line of the storage position are infinitely close to 30 cm.

Subject two reversing into the warehouse to correct the body, mainly to avoid the mistake of the body out of the line, the body and the storage location of the edge line close to parallel when the start to return to the steering wheel, the focus is to start to return to the right direction when close to parallel, as far as possible to just return to the steering wheel, just right the body.

The above content refers to the Encyclopedia - Subject 2 exam.

Mainly look at the rearview mirror; If the white line of the library is parallel to the body, it means that the car is positive;

Reversing is a mandatory item to obtain a small car license after 2013. Examine the driver's ability to operate the car on site. Reversing into storage is an assessment point in the driver's test. That is, to maneuver the vehicle in motion to correctly reverse into the garage from both sides.

There is a time limit for reversing into the warehouse at the time of the exam.

Exam content. 1. Pour it into warehouse B from the starting point A and stop it.

2. Go to the return area C and stop steadily.

3. Pour into warehouse B from the return area and stop steadily.

4. Return to A from library B and the exam is completed.

After entering the warehouse, it is best to look at the left rearview mirror to see if the body is correct (whether it is left or right). Because the left mirror is close to you, it is easy to see (it may also be related to the optical properties of the mirror). Secondly, look in the right rearview mirror as well.

In addition, when looking at the left rearview mirror, the action of hitting the direction should be earlier. For example, when the left rearview mirror body is about to be parallel to the sideline but not yet parallel, it is necessary to return to the right direction, otherwise it is more difficult for the body to be aligned.

At this time, we only need to look at our rearview mirror to observe whether the body is parallel to the garage line next to it, if it is parallel, it means that the body is positive, and if it is not parallel, it means that the body is not right.

According to our coach's right storage method: to the first point, the direction to the right to die, has been observing the right mirror, and so on the rear and the right library line of the distance is just 30cm, to the left half a circle, continue to reverse, to the body and the right library line parallel, the steering wheel to the left back to the right, and then according to the width of the body left and right fine-tuning.

Reversing into the warehouse, whether it is the left or the right storage, the direction of the look, in fact, is not difficult, the difficult thing is that the body is not correct after entering the warehouse, and countless students have been unable to pay the line because of this. When the rear of the car has been put into the garage and the front of the car has not been put into the garage, if the rear of the car is biased to the side of the sideline, the reason is that the timing of returning to the steering wheel is too early or too fast. That is, the midpoint of the rear of the car is not yet aligned with the midpoint of the bottom of the garage, and you put the steering wheel back to the center.

There are many ways to judge whether the body certificate is not certified when the subject two is reversed, first of all, you can look at your body and some lines next to it through your rearview mirror, whether it maintains a parallel state, if it is a parallel state, it means that the body is positive, and vice versa.

In fact, first of all, you need a sense of the car, if you have practiced many times in subject two, you may have a general perception, and you can look left and right at your rearview mirror when you arrive, as long as it is parallel to the yellow line, your body is actually positive.

If you want to judge whether the body is correct or not, the most important thing is to experience the feeling of driving for yourself, many candidates will experience this situation when they take this subject two, but some people are very smart anyway, very shrewd, and grasp it very well, such a situation will also happen, so the main thing is to see their own ability.

In fact, first of all, you have to adjust your rearview mirror, and the best position in the rear world is to be able to see the last handlebar in the mirror to occupy a 1 2 position. Then when you go again, you must look left and right, the distance between your body and the yellow, if it is to reach a parallel state, you have to stop quickly in the future, if you do not stop in the process, it is easy to make the car reverse out of the yellow line.

I think that when the second subject arrives, if we want to judge whether our body is back in the center, we can first see if our steering wheel is in a war, if our steering wheel is not planned, then I believe that our car must not be back to the right.

When we are practising Subject 2, we often have to delay our Subject 2 progress due to the arrival of the goods. Because we think that it is very difficult to reverse the library in subject 2. I think it takes constant training to make us look very positive when we arrive.

Do you think that subject two is the most difficult test of all the exams, because many people who have taken the driver's license test say so, subject two is the most difficult test, and every node will be grasped more accurately, so you must pay attention to some mistakes when you take subject two, and try not to avoid making mistakes, because one wrong step and one wrong step, you will not be able to pass at all in the back.

Before officially reversing into the warehouse, practice more straight lines to find the feeling of uprightness of the body. When walking in a straight line, keep the body straight, get out of the car to check if necessary, and then sit in the car to feel what it is like to be upright.

Find a good reference. When the body is upright, find a suitable reference for yourself by observing the things around you, and fix the state of the body integrity in your mind. Be careful to have a wider field of view, and try to refer to distant references.

Learn to look in the rearview mirror and correct direction through the steering wheel. When entering the pile, you should observe whether the distance between the body and the two sides of the library is roughly equal through the rearview mirror, and when you observe that the body is parallel to the library edge line in the rearview mirror, your body is positive at this time. Note that there is a certain visual difference when viewed through the rearview mirror.

When reversing, the distance between the library line and the body is large, and the direction is hit.

Understand the principle of movement of the car and control the speed of the car. Novices are not very familiar with the correction of the direction, so control the speed of the car and buy time for the correction angle.

Because the space that can be adjusted after reversing into the garage and leaving the garage is very small, it is particularly important to correct the body when leaving the warehouse, but there are still many students who have the situation that the body is always crooked when reversing into the garage and leaving the warehouse.

Subject 2: If the body is not correct after leaving the warehouse, it should be that the steering wheel is not well controlled, and the body can be observed through the rearview mirror, so that the direction can be corrected.

In fact, it is very simple to judge whether the body is correct or not, you sit in the driver's seat and turn your head to see if the yellow line on the left is parallel to the body, and then look at the position of the front of the car, look far away to find a reference, and then practice repeatedly to find out the feeling of the body.

Subject 2 After leaving the warehouse, the body is not right, and the general reason is that the steering wheel is not aligned when leaving the warehouse, or it is just a casual steering wheel!

Subject 2: The body is not correct out of the warehouse.

It means that the direction did not return to the right when you parked.

The direction was not adjusted in time when leaving the warehouse.

After leaving the house, you need to adjust the parking space by yourself, if you say that it doesn't look right, you need to correct it, and this depends on your own feelings. It may be that you don't have a good grasp of the control of the car.

When you look at the front of the car after leaving the warehouse, you turn the steering wheel of the car back to the right. If the body is not correct after leaving the garage, it must be that your direction is not well controlled.

Subject 2: The body out of the warehouse is not right, and the direction is not the right time. You can fix the bodywork.

Adjust the rearview mirror for visual problems.

Subject 2: The method of reversing into the warehouse to see if the body is correct is as follows:

1, swing car, the body is 1 meter away from the side of the library, the right rear window is a small triangle, and the corner of the library is the starting point on the right side of the triangle window;

2. Hang the reverse gear, kill the right, lift the hole with the book clutch, open and go;

3. Look at the distance between the rear of the car and the corner of the garage, and quickly return to the direction when it is gradually approaching 30 cm, you can not return to the right, because you have to look at another point at the same time, you will accept the door handle is the door handle, continue to walk, and wait for the front end of the door handle to coincide with the corner of the library, or it is about to coincide, and immediately kill to the right again;

4. Look at the left rearview mirror, the left sideline is all leaking out, quickly return to the left in the positive direction, and the clutch should not be loosened;

5. Observe the left and right rearview mirrors, look at the rear of the car, which side is wider to hit a little direction, and then quickly return to the right, that is, to hit the direction and then come back at the same time.

Look, whether the rearview mirror is a flat mirror or a convex mirror. When the plane mirror is parallel to the edge to look at the body, it is actually parallel. If the convex mirror is a little narrower than the front, it is actually parallel.

You can also judge whether the body is standing upright by looking at the left and right rearview mirrors. The specific method is to observe whether the edges on both sides of the body are parallel to the garage, and whether the distance between the body and the two sides is equal. If you find that it is not parallel, hit the direction that is far from the sideline.

Slow down and adjust slowly until the two sides are parallel equidistant.

How to keep your body upright when reversing into the garage;

1.Practice more straight lines: Practice more straight lines before reversing into the warehouse to find out the feeling of the integrity of the body. When walking in a straight line, keep your body upright. If necessary, get out of the car and check the burning. Then sit in the car and feel what it looks like to stand upright.

2.Find a good reference: When the body is upright, find a suitable reference for yourself by observing the things around you, and fix the upright state of the body in your mind. Be careful to broaden your field of view and try to refer to distant references.

3.Learn to look in the rearview mirror and correct the direction with the steering wheel: when entering the pile position, observe whether the distance between the body and the garage is approximately equal.

When you observe the body parallel to the garage sideline from the rearview mirror, your body is positive at this point. Please note that there will be some visual differences when viewed through the rearview mirror. When reversing, go in that direction on which side of the garage line is farther away from the body.

The scope of the repair direction should not be too large, and it must be corrected immediately when it is about to be parallel.

4.Understand how a car moves and control its speed. Direction correction is not very familiar to newbies. Control the speed and gain time by correcting the angle yourself.

Millions of car purchase subsidies.

Straightening the car when leaving the warehouse should be used when reversing the car into the warehouse in subject 2.

Look straight ahead, and the straight line at eye level is perpendicular to the front of your car.

Many people have a problem with learning to drive, that is, they will unconsciously look at the front of the car, instead of looking at the front. This is not right.

Only look ahead, the farther you look, the more accurate it is; If you just look at the front of the car, you can't see it if it's crooked, so if you want to see whether the front of the car is right, you must first find a point, this point is in the right parking space, if Zheng San and the cross section of the car is vertical, then it is the stove cluster is straight, if it is not vertical, there is no right.