Find a set of XP3 reload system tutorials

1.If it's simpler, use 360's reload master, and if you want to reload it yourself with a disc and USB stick, you still have to learn a little bit.

If you use a CD, you either go to the street and buy a system disk, or burn it yourself (provided that your computer's optical drive has a burning function) and then install the nero software, and then go to the system home**The system image you want. iso, the file is ready, now start engraving:

Double-click the nero icon and click (burn the image to the disc) to appear (Open) dialog box, find the file (it will not be displayed if it is not an ISO file), click on the file and then click the (Open) button. The (Image Burning) dialog box appears, at this time, the ISO file has been selected in the (Image File) column, (Destination Drive) is also selected, (Number of Burned Copies) is selected, (Check the disc data after burning) is checked, and the recorder inserts the CD-R blank disc, wait. Write speed) column is lit, set to 24x or lower, click (next) to open the engraving, and the disc is burned successfully after verifying that the data is correct.

3.To engrave a CD-R disc, the file size should be less than 700MB, and the current CD-R blank disc on the market is labeled as 700MB but is actually 702MB. The nominal 730MB super engraved disk is also 702MB, and the engraved system disk should be selected as a better disk, please pay attention to the choice.

4.On the issue of burning speed, some people say that slower engraving can be engraved deeper, and the storage time is longer, I don't know if it's right or not. I used 40x to engrave, which is also very good, but various file providers require slow burning, which seems to be slower and safer.

The installation version is still the GHO version, and the U disk is still a CD or a hard disk, and it is directly installed.

How do I install the XP system when I reinstall it? In the event of a system failure, it is generally necessary to reinstall the system, and there are also users who want to reinstall the XP system when the computer is too slow, and there are many ways to reinstall the XP system, and generally choose the simplest method to operate, such as one-click reinstallation, here we will take Chunzai** reinstallation as an example to teach you how to reinstall the XP system.

Instructions:

2. If it is more than 4G memory, it is not recommended to install the XP system, if the blue screen problem occurs after installing the XP, refer to the solution to the blue screen 0x0000007b installed XP.

1. The current system can be used normally, and there is a network connection.

2. If you already have a ghostXP system ISO file locally, you don't need to connect to the network.

2. The steps to reinstall the XP system on the computer are as follows

2. Double-click to open the main interface, and you can back up the current system and data in "Backup & Restore";

3. On the "Reinstall System" page, select [Ghost System], click [Reinstall System Now], and if there is an XP system ISO image locally, select [Local System];

4. First of all, reinstall the environment detection, if the detection fails, you can't use this method to reinstall, after the detection is completed, click Next;

5. Check the items that need to be backed up, especially the desktop files, and click [Backup Data to Proceed to the Next Step];

6. Then select the operating system to be installed, under normal circumstances, select XP for single-core processors, select XP for less than 1G memory, and choose to install Win764 bit for more than 4G memory;

7. Scroll down to find the ghostxpsp3 system and click [Install this system];

10. After the boot file is installed, it prompts that the system is ready, and it will automatically restart after 10 seconds;

11. After the computer restarts, the boot manager interface will appear as a [Good installation and reinstall system] boot item, and this one will be selected by default;

13. After the progress bar ends, the computer will restart to enter this interface and execute the XP system component installation and system configuration process;

14. The whole process can be installed in 5-10 minutes, and finally booted into the desktop of the XP system, and the XP system reinstallation is completed.

How to reinstall the XP system is introduced to you here, in the case that the system can still be used normally, you can follow the above method to reinstall the XP system, it is very simple.

Many users are asking how to install the GhostXPSP3 system, and now the XP system has gradually withdrawn from the operating system market, but there are still many old computers still using the XP system. There is a small problem with the user's xp system, and I plan to reinstall the ghostxpsp3 system, but I don't know how to install it. In fact, the ghostxpsp3 method of reinstalling the system is not difficult, you can reinstall it by decompressing it directly, let's learn the ghostxpsp3 system installation tutorial together.

Instructions:

1. The hard disk installation method is only applicable to the computer that currently has a system and the system can be used normally, otherwise you need to use a USB flash drive or CD.

2. XP is suitable for old models, and new models are not recommended to install XP system, because of waste of hardware, and may not be able to install XP system.

Install XP to appear 0x0000007b blue screen solution.

Steps to directly install the XP system on a USB flash drive.

Windows XPSP3 Disc Installation Steps**.

1. Preparations:

2. Decompression tool: winrar or good press, etc.

2. The steps to install the ghostxpsp3 system are as follows

1. Upload the GHOSTXPSP3 system ISO image file to a partition other than the C drive, such as to the D drive, right-click and use WinRAR and other tools to decompress it to the current folder or the specified folder, and it cannot be decompressed to the C drive and desktop, otherwise it cannot be installed;

2. After unzipping, we open the directory and find [Double-click to install the system. exe] program;

3. Double-click [Install System.] exe] to open this installation interface, select [Restore System], select the file file path of the image file, check the location C drive to be installed, if it is not displayed C disk, you should judge the C disk according to the volume label or capacity, and then check [Restart after execution], and finally click [Execute];

4. A prompt box pops up, prompting that the image file is about to be restored to partition C, click OK to continue;

5. At this time, the computer will restart, enter this interface, and select the sysceorecovery item to start automatically by default;

6. Boot into this interface, perform the deployment process of formatting the C drive and installing the GhostXPSP3 system to the C drive, you need to wait for 3-5 minutes;

7. After the above execution is completed, it will automatically restart, enter this interface, and start the ghostxpsp3 system installer;

8. Execute the ghostxpsp3 system driver installation and configuration process, and finally execute the activation process, which takes about 5 minutes;

9. The process of installing the GHOSTXPSP3 system takes 5-8 minutes, and finally boots into the new XP system desktop, and the GHOSTXPSP3 system is installed.

ghostxpsp3 how to reinstall the system is like this, if the current system can be started normally, you can go through the above steps to complete the car and reinstall the system.

The most important thing about reinstalling is backing up your personal files.

First of all, in the operating system of XP.

The personal file should be in the system disk of the document and setting your login name.

Back up everything in this folder, and that's it.

Generally, reinstallation will overwrite the C drive, in addition to the above folders, you also need to see if there are any files that need to be backed up under the C drive.

First of all, it is best to make an image file of the C drive. Back up to another disk. Inevitably, some documents cannot be found. It can also be restored. Make a boot USB stick. Copy the file to a USB flash drive. Set the USB flash drive as the first boot. That's it.

Save the desktop, C drive. Important information in my documentation. Then the next driver wizard with network card driver. It's ready to go.

Installing a 360 will automatically help you reload.