What s the deal with the wireless network on your mobile phone but you can t use it

The reasons why the mobile phone is connected to wireless wifi but cannot access the Internet are:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

Turning off the Wi-Fi is that reset Jian.

The mobile phone can be connected to the wireless network, but the connection can not be connected to the network, the reason why the mobile phone can not connect to the network after connecting to the wireless network is because of the following reasons:

1. The router network is unsuccessful. 2. There is a fault in the broadband. 3. The security settings of the router are affected.

The mobile phone wireless network shows that it has been connected to the network and the solution to the problem is as follows:

Huawei P30

EMUI1: First tap the phone settings.

3. Then you can see that the network is already connected, then click on this option.

4. Then click on IP settings.

5. Finally, set it to static, and it will show the router address to access the Internet normally.

AnswerYou can reconnect to the wifi and give it a try: 1. Enter the settings interface, find and click [Wireless LAN]. 2. Find the network name of your home in the wireless LAN and click on it.

3. After clicking Enter, find and click [Ignore this network]. 4. Click [Ignore]. 5. After [Ignore] is completed, re-enter the password to connect.

It's still not okay to ask questions.

There is also a situation where your wifi is in arrears.

That's a fake lucky number.

First of all, determine whether the **** expires, if you forget to pay the fee, the network will be disconnected, resulting in the wireless network is unable to access the Internet, and secondly, check whether the router is aging and faulty, the life of the router is generally 3-5 years, and the use of too long will cause the wireless network to change the card or no network.

The mobile phone signal is full, but I can't connect to the Internet, what's going on? Let's come in and take a look.

Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot.

If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

6. After the wireless setup is completed, click Save, and then restart the router to use it normally.

1. Check your phone's settings.

Check if there is a wifi icon in the status bar, or go to Settings --WLAN to see if the wifi has been successfully connected. In addition, go to Settings - Other Networks and Connections - Private DNS to see if private DNS is set, if it is enabled, it is recommended to set Private DNS to off and try again.

2. Check WiFi

Please compare whether the same wifi connection is normal with other mobile phones, and confirm whether it is the wifi or mobile phone. If it is due to Wi-Fi, please restart the wireless router to check. Some public Wi-Fi networks require browser authentication before they can connect to the Internet.

3. Check the network permissions.

Please go to iButler on your phone - Traffic Management Traffic Monitoring - Network Management or Settings Application and Permissions - Permission Management to check whether the application network permission has been enabled.

4. Check the environmental causes.

If the phone is far away from the router, although the wifi signal is displayed, it may not be able to access the Internet, it is recommended to adjust the distance between the phone and the router before trying.

5. Reset the network settings.

Go to Settings - System Management - Backup & Reset - Reset Network Settings - Select the corresponding SIM card - Reset Settings, and then use View.

Note: Resetting network settings resets Wi-Fi, mobile data, and Bluetooth connection records.

6. Reset all settings.

Go to Settings - System Administration - Backup & Reset - Restore all settings and follow the on-screen prompts.

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2) It is recommended to search for Restore Network Settings in Settings and follow the on-screen prompts to restore. (Note: This restores the Wi-Fi, mobile data, and Bluetooth connection records and deletes the Wi-Fi and Bluetooth connection records).

If the problem persists, we recommend that you back up your data (third-party apps such as QQ and WeChat need to be backed up separately) and bring your purchase voucher to the Huawei Customer Service Center for testing.

It may be because the signal is not good, especially in some remote places, such as mountainous areas, suburbs, basements, parking lots and other places with poor signal coverage, resulting in 3G, 4G network signal is not good, do not panic in this situation, you need to wait patiently for the network signal to improve, or change to other places to try.

We can also try this method. Click on "Settings" followed by "General".

Find "Restore" in "General" and click on it.

In the "Restore" section, find "Reset Network Settings" and click on it.

But some mobile phones need to reset all the settings, not afraid of the trouble of a delay in the imitation of the step in place directly press to restore all the settings, which is useful for wireless connection or traffic. For traffic connections, if this is not possible, you can call ** to the operator to let the customer service to re-shock the background network, it will be fine. If there is no round line, it is not good, it is a system problem, it is recommended to take it to the mobile phone store after-sales.

Sometimes it's not a problem with the wireless router, it may be, there is no network, contact the network operator for consultation, or look at the settings on the phone, find the wifi to remove this network, and then re-enter the password to try, generally in the case of lead can solve the problem.

1. There is a problem with the wireless network itself

If you find that the mobile phone is connected to the wireless network but can not access the network, then we first need to check whether there is a problem with the wireless network, if it is a wireless router user, please check whether you can use the computer to access the Internet, if the computer can access the Internet, then the network is no problem.

2. The wireless network password is entered incorrectly

In order to ensure the security of the wireless network, the wireless router network used in the home now has a wireless password, the mobile phone to connect to the wireless network, you must enter the correct wireless password to connect, so that it can be used normally, if you find that you can not connect to the network, or some times it shows that it is connected, but can not be on the network, you may wish to disconnect the network connection in the wifi settings, and then enter the password to connect and try.

You need to make sure if your broadband can go online!