If the computer can be turned on and can play games, does it mean that the power supply is fine? 10

Updated on number 2024-04-21
12 answers
  1. Anonymous users2024-02-08

    Yes, the power supply must be fine, otherwise the game will not run.

  2. Anonymous users2024-02-07

    If the computer console can be turned on and can play games, is there no problem with the power supply? I read your description, and your computer restarts in a moment. The motherboard was also sent back to the merchant for overhaul and said it was no problem.

    I also suspect that there may be a problem with your power supply, that is, the lack of power supply causes the computer to restart, the best way is to change the power supply of your computer to try it and see if there is still such a situation, if it is good, it is a problem with the power supply, if the problem continues, then it is a problem with other hardware.

  3. Anonymous users2024-02-06

    Look at whether the voltage in your home is stable, there are many air conditioners in summer, and where the voltage is not good, the voltage will be restarted if the voltage is unstable. When you look at the power supply, or go out to an incandescent lamp, when the voltage is unstable, its brightness will change significantly, and the lamp and LED lamps and energy-saving lamps cannot be seen. You look at the voltage, make sure it's the voltage problem, change the full voltage power supply, 100-240V input voltage power supply.

  4. Anonymous users2024-02-05

    The reason for the wireless reboot of the computer may be due to CPU overheating or some other system failure, of course, it is more likely to be some problem with the power supply, such as insufficient power supply wattage or some power supply. Fault.

  5. Anonymous users2024-02-04

    Power problems generally appear in old communities or rural areas, caused by aging wires. If you're not in such an area, you can rule it out.

  6. Anonymous users2024-02-03

    The computer squeaks and squeaks when playing the console, then shuts down. And it can't be turned on, you must unplug the power plug and wait for more than 3 minutes before it can be turned on. I can't hear the squeaky sound coming out, the specific situation is that the sound will get louder and louder when you want to turn it off.

    Now I'll bring my configuration sheet, and the gods will help me look at it. Thanks, wow, we're both in the same configuration.。。。 But you have to judge whether it's the ** sound, whether it's the motherboard, or the power supply, or the hard disk.

    You open the side panels and take a closer look. If it's loud when the power is off, see if it's a sound from the hard drive. If you said that you need to unplug the power supply when shutting down and wait for 3 minutes to turn it on, that is to pay attention to the power supply.

  7. Anonymous users2024-02-02

    The system should have been rebooted to protect the hardware.

  8. Anonymous users2024-02-01

    I say the following things you can try:

    First, first of all, check whether the socket is energized, pull out the wire connected to the computer, there may be static electricity, whether the "electric fusion" of the motherboard is burned out, second, check whether the CPU radiator is hot, and whether the radiator fan can rotate.

    3. Whether the power supply of the chassis is good, the connecting cable is unplugged and plugged in again.

    Check the above points, if they are all normal, it may be a problem with the motherboard. Let's see if the power supply of the case is turning.

  9. Anonymous users2024-01-31

    What's wrong with plugging in the power supply is generally a problem with the host hardware.

    Check whether the connection cable between the monitor and the main unit is loose.

    If not, it may be a malfunction caused by poor hardware contact.

    1. Turn off the power, open the case, clean up the dust, especially the dust of the CPU fan, and check whether the CPU fan is rotating normally.

    2. Plug and unplug the memory, wipe the gold finger part with an eraser, and re-insert it (don't reverse it).

    3. Plug and unplug the graphics card, wipe the part of the gold finger with an eraser, and reinsert it tightly (the buckle should be buckled).

    4. Unplug the power cord, cut off the main Qinchun button battery, wait for three minutes, and reinstall it on the motherboard.

    5. If the above operations cannot solve the problem, it is recommended to send it to the maintenance center.

  10. Anonymous users2024-01-30

    The reboot is mainly due to the fact that the graphics card is running fast now, and the corresponding power consumption is very large, accounting for more than 50% of the power consumption of the entire computer at full load.

    If the power supply is insufficient, the CPU will detect the abnormality if the voltage is low, which will be manifested as a protection restart.

    The selection of power supply, mainly the selection of power, generally the old power supply is designed to meet the power consumption configuration of the old computer in the past, and the new power supply can be suitable for the current new graphics card and hosting.

    Choose a power supply. The choice of power supply is mainly based on power, as the computer hardware gets faster and faster, the power will become more and more, just as the higher the speed of the sports car engine to provide more power. Generally, the use of new power supplies can meet the requirements, if you don't know how much power you want, just ask the seller what is the maximum power now you can buy. There are also power supplies that need to be aligned with the motherboard interface, some old motherboards and new power sockets cannot be used universally, and may need to switch interfaces.

  11. Anonymous users2024-01-29

    There is no problem with the configuration, but your processor only gives 4G memory a little small, and it may be a problem with the power supply.

  12. Anonymous users2024-01-28

    A PC reboot isn't necessarily a power issue, you'd better check if your CPU temperature is too high first.

Related questions
8 answers2024-04-21

The computer is arguably one of the greatest inventions of our time. It plays an increasingly important role in our production and life. Now computers have also entered thousands of households and become one of the necessary electrical appliances for every household. >>>More

20 answers2024-04-21

Confirm that the monitor power supply and data cables are correct. >>>More

7 answers2024-04-21

There are many reasons for this.

Virus issues. There are too many installation files on the system disk, and there are too many temporary files on the system disk that have not been cleaned up (so don't always install the C disk with the installation files, and often clean up the temporary garbage). >>>More

24 answers2024-04-21

1. When the computer is first turned on, the screen of the monitor shakes very much, and sometimes even the icons and text cannot be seen clearly, but it will return to normal after a minute or two. >>>More

21 answers2024-04-21

The voice of the long sound is that the memory is not detected, you don't plug in the CPU, hehe, I won't talk about this, of course there is no reaction, the head is gone, do you say people can still talk? >>>More