What should I do if someone breaks the air conditioning outlet in the store?

Hello, there are always people breaking the air conditioning outlet in the store, and the best way is to remove the block, which cannot be adjusted artificially.

You can put a sticker on this air conditioner, prohibit casual movement, I believe they will be very conscious after seeing it, you can also turn down your air conditioner, so that you will feel cool, and no one will move.

You can put a piece of paper on the front of the air conditioner, which says do not touch the air conditioner If there is damage, the original price will be compensated, and there is monitoring indoors. The characters are larger and the colors are eye-catching. This will prevent a lot of people from touching the air conditioner.

Under normal circumstances, there will always be customers moving this air outlet in the air conditioner in the store, which is normal, because some people feel that it is cold, you can paste a warning sign on the refrigerator to remind customers not to do it themselves.

Now the air vent of the air conditioner, if someone is always swinging, you can put some warning words next to it, remind it, and then tell them that it is forbidden to touch it with your hands.

You can put a piece of paper on the top of the air conditioner. Don't break the air conditioner by hand, so that you will pay attention to it when you see it, and always break the air conditioner's tuyere will be broken.

I think if someone always gets it, it proves that the fog is definitely not cool enough, and it would be good to make the air conditioner cooler and let the whole house cool down.

Is it the guest who is breaking? If you see it, you can persuade it, because it is easy to damage the equipment. If the employee is breaking it himself, you can tell the foreman and let him deal with it, which will be better.

Hello, this kind of thing is unavoidable, because every customer will choose the air conditioner when they enter the store, and they can sit down where they can blow, and if they can't blow themselves, they will swing it with their hands, and it is recommended that you write a warm reminder on the air conditioner, be careful of electricity, etc., there is no other way.

Set up automatic shaking up and down, and label the air conditioning outlet, prohibit manual work, otherwise the damage cost will be compensated.

Generally, a small note is posted on the air outlet of the air conditioner, and it is written that it is forbidden to use hands.

That's why some people won't break it with their hands when they see it.

I don't use my hands to adjust the angle of the air outlet.

Hello, you can buy an air conditioner baffle to block it in case someone breaks it.

You can install a guardrail on it, or stick a note on it to warn those people not to break it.

In this case, I suggest that you can use a baffle, as long as you use a baffle, this part will not appear after blocking this situation, which is a very good solution.

This can only indicate that the position of your air outlet is not suitable. It is recommended that you can buy one. The air conditioning outlet baffle can effectively solve the problem of the seal being placed by people.

You can install a bayonet on the air vent of the air conditioner, and the size that your hand can't reach into, you can effectively avoid it.

It is recommended to reinforce and weld the air outlet to death.

There are always people swinging the air conditioning outlet in the store, what should I do? I think you can cut a sign and hang it in that piece, so if someone else has wine, they won't put it again.

You can write a note next to the air conditioner Everyone is responsible for taking care of the air conditioner.

Post a note to remind others to take care of public property.

Some people argue that the air outlet of the air conditioner is because the air outlet is not suitable.

This air conditioner outlet, this you can install a protective fence to fix it so that people can't do it.

Electricity: that air conditioner, the air outlet is always broken by hand, you can put a slogan or add a box to bring it. This keeps you safe.

If someone is going to move the air conditioning outlet in the store, then you must get something to protect it.

The air conditioning outlet in the industry, there are always people who break around, because this kind of air conditioner should not be so cool, and the temperature is slightly lowered.

Why would anyone move the air outlet of your air conditioner?

Power off and then power on, or manually close the pendulum air strip to the closed state, and then press the power on/off.

The air conditioning tuyere is the terminal equipment used for air supply and return air in the air conditioning system, and it is an air distribution equipment. The air supply outlet sends the refrigerated or heated air to the room, and the return air outlet sucks the indoor dirty air back, and the two form the entire air circulation, which ensures the indoor cooling and heating effect at the same time, but also ensures the refrigeration and comfort of the indoor air.

**Precautions for installation of air conditioner tuyere.

1. It is best not to set up a light trough at the air outlet of the air conditioner, which is easy to block the hot air flow from reaching the activity area of the personnel and affecting the heating effect.

2. According to experience and test data, the horizontal louver is adjusted to 45 degrees during winter heating, which is the most suitable angle, and too high or too low may affect the heating effect.

3. The air outlet of the air conditioner is large, which is easy to accumulate dirt, which affects the air temperature and appearance of the air conditioner, and the user should regularly clean the air outlet of the air conditioner to keep the air outlet clean and ventilated.

The fixed shaft of the wind deflector is prismatic, and the corresponding structure is also inlaid with it, you may have broken the fixed shaft, or the inlaid structure was damaged, resulting in an abnormality in the stepper motor drive.

It should be that the wind guide wing has been broken, and it is recommended to find after-sales repairs.

The stepper motor was broken by you.

Let's look for after-sales service, there shouldn't be any big problem.

Hello, thank you for asking the company.

Hello, preliminary analysis, whether the fixed shaft of the wind deflector is broken or caused by falling off, the stepper motor can not be driven normally, it is recommended to check whether the wind deflector falls off and reinstall it.

You are welcome to ask the company questions again.

We wish you a happy work life

The interior is fully snapped, but many of them are one-time cards, and you can only wish you good luck if you dismantle them yourself.

Hello, it is advisable not to do it yourself and find a professional.

This requires a screwdriver to get it, that is, there are four screws in the back. There's a lot of screws to be in there.

Demolished. But there must also be **. And depending on what kind of brand and model you are. The ordinary kind of split air conditioner is heavy to start with, spraying cleaning agent is useless, it is best to borrow a few more starters, and it will be done in one morning!!

If it is a single blade, you can manually break the baffle back to the closed state in the shutdown state, if it is not broken, you can only remove the swing blade motor to reset the gear position, and the latter has certain difficulties.

The wind deflector motor is broken, and there is a position sensor inside the motor, and if it is broken, the position is wrong.

In the shutdown state, manually break the baffle back and close.

It won't be reversed, it's likely that the stepper motor is broken.

This is caused by the misalignment of the swing motor inside and the gear of the seal, and it is necessary to readjust it, but it should be noted that it is easy to be damaged here, and you must be careful when adjusting.

Either the blade is broken, or the stepper motor gear is damaged and cannot be synchronized, so you can replace the stepper motor.

Turn off the power again, look at it at the startup, if it doesn't work, then you broke the link mechanism inside.

It is common for the air deflector to be twisted by external force, and the plastic parts inside are tripping or breaking. Some are the wind deflector motor burned out, and very few are the open circuit of the wind deflector control line or the motherboard failure.

The environmental conditions are not good, the weather is hot, the air conditioner is outdated, the air conditioner is turned on for a long time, and the number of maintenance during the air conditioner start-up process increases, usually once every month and a half.

If the environmental conditions are good, the air conditioner is relatively new, there is less dust in the air, the air conditioner is turned on reasonably, and the electric fan is used alternately, the maintenance cycle can be appropriately extended, from the start of the air conditioner to the shutdown of the air conditioner for maintenance 1-2 times.

Air conditioning maintenance. 1. Remove debris from the vent to ensure proper ventilation. Observe whether the outdoor rack is loose, and clean the outdoor ventilation grille for foreign objects. At the same time, keep the vents unobstructed.

2. Clean the surface of indoor and outdoor heat exchangers to improve the efficiency of heat exchangers. When cleaning the indoor heat exchanger, you should carefully remove the panel, scrub it with a soft rag, and use a small brush to gently scrub the heat exchanger of the internal machine, so as to achieve the purpose of removing dust and harmful accumulation of multiplying germs. However, it should be noted that since the heat sink is a thin aluminum material, it is easy to deform after being stressed, so it should be carefully brushed.

This has nothing to do with the "memory function" of the air conditioner, and the reason why it cannot be restored to its original position now is that the rotating shaft of the air guide strip is misaligned to a certain extent when it is broken by hand.

It is recommended that when the air deflector is open, it should be broken by the same amplitude in the opposite direction to the previous breaking direction, and it can be restored to the original position when it is closed.

When breaking, try to clamp the left and right sides of the air deflector strip with both hands to prevent the air deflector from being damaged.