If the electric switch at home can t be turned on, who should I find to fix it?

Find a property.

Trip. It is generally the switch behind the meter or the air (leakage) switch in your home.

1.The switch trip behind the meter is generally caused by your household electricity load exceeding the reported installed electricity capacity, it is recommended that you apply for "capacity increase" to the power supply company, and you can pay attention to and bind the "China Southern Power Grid" specifically.

95598 "Official Platform" "My Electricity" "Business Handling" "Business Change" Select "Capacity Increase" Fill in the handling information, handler information and SMS verification code, and click "Confirm".

2.The air (leakage) switch trips generally because of the air switch.

The rated current is too small to meet your household electricity load or your household appliances have leakage and short circuit, it is recommended that you entrust a qualified electrician to check for you.

The safe operation of the traction power supply system that supplies power to the electric locomotive should be ensured. In the event of an accident, it is installed in the traction substation (opening and closing station.

partition kiosk) is the short-circuit current generated by the accident.

Activate, automatically disconnect the circuit breaker that supplies power to the accident point to reduce the scope of the accident, ensure the safe operation of other equipment and supply power to the non-accident line normally. This action of automatically disconnecting the circuit breaker due to an accident is customarily called"Trip. "。

If the electric switch is broken at home, it should depend on the situation, first of all, to determine which department the electric switch is under the management, if it is a property, then you must find a property to repair, if it is not closed by the property company, then you have to find a way, or repair it yourself, or ask a door-to-door technician to solve it. Generally speaking, the electric gate in the public area must be the responsibility of the property, if not, you have to deal with it yourself.

First of all, if it is a public area of the electric switch, then there is no doubt that the property needs to be repaired, and it is good to leave it to the property to deal with at this time. If it is not a power gate in a public area, such as your own home, most of these cases are not under the jurisdiction of the property management company, but you can also seek the help of the property company, but you have to pay some additional repair costs. This is equivalent to finding an electrician to repair it, but it is more convenient and faster to find a property.

Secondly, if it is determined that the electric switch is indeed the responsibility of the property, then you can find the property to repair it. However, in some cases, the property is not willing to be repaired. At this time, it is necessary to determine how long the warranty period of the electric gate in the public area is, if it is still within the warranty period, then it is the responsibility of the property to repair the electric switch, and they must be required to repair it.

The trip is usually the switch behind the meter or the air (leakage) switch in your home.

1.It is recommended that you apply for "capacity increase" with the power supply company, and you can pay attention to and bind the "China Southern Power Grid 95598" public platform "My Electricity Consumption" "Business Handling" "Business Change" Select "Capacity Increase" Fill in the handling information, the person in charge and the SMS verification code and click "Confirm".

2.The air (leakage) switch trips, generally because the rated current of the air switch is too small to meet your household electricity load or your household appliances have leakage and short circuit, it is recommended that you entrust a qualified electrician to check for you.

We hope you find ours helpful.

Find a property, the property will send an electrician to help you, don't worry, it's easy to solve. If there is no property, there are electricians in the streets and villages, and electricians are called to check and repair them.

If you can't push the electric switch at home, you should find an electrician to repair it, see if there is an electrician in the property in the community, or find an electrician you know, and let them show you what is the cause of it, whether it is leakage?

Generally, the causes of tripping are divided into: leakage trip, overcurrent trip, short circuit trip, etc. Don't be in a hurry if you trip, you can try to close the switch first, if you can't close it or close it, jump it, then don't deal with it yourself.

You can contact the property electrician to troubleshoot the indoor short circuit fault point, or call the power service**, and the service personnel of the power supply company will assist in dealing with the relevant faults, or you can find a professional electrician platform to arrange the electrician to provide door-to-door service.

If you have a property, you will find a property, and the property will send maintenance personnel to come and see it. If you don't have a property, get an electrician.

If the electric switch at home cannot be delivered, you can contact the property, and the property has an electrician who can come to check. If you don't have a property, you can only find an electrician to inspect it yourself.

Check it yourself first, whether there is a problem with grounding and connecting electricity, first unplug all electrical appliances, and then have a reset button on the switch, press the reset button, and then push the switch up. If it's okay, plug the electrical appliances one by one, and when there is a switch tripping, there is a problem with the appliance. If the switch cannot be reset, you can find a professional electrician to check.

If the switch does not close, the first thing to judge is that there is a short circuit in the circuit, and there must be a professional electrician to find and deal with it in sections. Secondly, the cause of short circuit in electrical equipment should be identified by the method of segmented unloading to achieve a quick solution.

Residential property, or have an electrician you know.

If it's a community, it's looking for a property, if it's a village, it's looking for an electrician.

Find someone from the power supply bureau to repair it.

If the electric switch at home can't be turned on, it should be a short circuit inside. There is a property company that can contact the property company, they have a professional electrician who can repair it, if there is no property, then find a professional electrician to repair it.

If the switch in your home is broken, it depends. First of all, we have to determine which department is responsible for the switch. If it's a property, be sure to find a property to repair.

If it is not sealed by the property company, you must find a way by yourself, or repair it yourself, or ask a door-to-door technician to solve it. Generally speaking, the power switch in the common area must be the responsibility of the property, if not, you have to deal with it yourself.

What should I know before looking for a property to repair the switch?

First of all, if it is a switch in the common area, then there is no doubt that the property needs to be repaired. At this time, leave it to the property. If it is not a switch in a public area, such as a switch in your own home, in this case, most of them are not within the jurisdiction of the property management company.

However, it is also possible to ask the property for help, but there is an additional repair fee. This is equivalent to finding an electrician to fix it, but it is more convenient and faster to find a property.

Secondly, if it is determined that the switch is indeed the responsibility of the property, then you can find the property to repair it. But in some cases, the property is not willing to be repaired. At this time, it is necessary to determine how long the warranty period of the switch in the common area is.

If it is still under warranty, it is the responsibility of the property to repair the switch and must have them repaired.

Dear, hello, I am happy to answer for you who is always tripping the electric switch at home to repair if it is because there is high-power equipment in the community, and the trip is caused by overload, then you can find the property to deal with it. If there is a problem with the line of the community bus, it is also to find the property to deal with. If the electrical appliances used in your home are overloaded or the line is short-circuited, etc., you should find an electrician to repair it.

If there is a quality problem with the product used at home, then find a merchant to deal with it. You can first ask for help from the property in the community, or you can find a professional electrician to help with repairs. The general circuit tripping reasons are as follows:

1. Insufficient voltage: If there are too many electrical appliances and the voltage is insufficient, the power will be cut off at home. 2. Short circuit of the line

The wiring is not planned properly, and there is a short circuit, resulting in tripping. 3. Leakage: If the electrical appliance will leak, resulting in insufficient power supply, it will trip.

If the empty opening and closing does not open and close, follow the steps below to check:

1. There is a small button on the empty opening, and the small button will jump up after tripping, and you must press this small button before closing the brake.

2. If you have done what you have said above, and you still can't close the brake, there must be a serious short circuit or leakage on the above line, which should be carefully analyzed and checked by the line.

3. Knock down all the empty openings below the total empty opening in the distribution box, and then close them one by one: close an empty opening, close the main gate (this step must be done and cannot be omitted), and when you encounter the empty opening that cannot close the main switch, it means that there is a problem with this line.

4. After the problem of the line is solved, it is easy to check the fault point. If there is a ground plug, focus on checking the ground plug, because the ground plug is easy to be easily flooded when mopping the floor. If you really don't know how to check the line, ask an experienced electrician to come to service.

Leakage, or the ground wire and the neutral line of the live wire are short-circuited, or the electric switch is broken, and the modern mainstream household electric switch may not be closed, or it is easy to trip.

In the case of power failure, first use a multimeter to test whether the neutral line and the neutral line of the live wire are short-circuited, under normal circumstances, the three wires are not connected to each other, and all electrical appliances should be disconnected before the test.

Unplug all electrical appliances, turn off the lights, try again, if it can be the cause of the lights or appliances, restore the power supply one by one and check to find the fault. If it doesn't work, the switch is broken, try a new one.

If the electric switch at home does not close, it should be a place where there is a short circuit in the circuit at home, and it is best to find a professional electrician to check it.

Hello, the solution: disconnect the wiring of the main switch at home, try to close if it can be closed, it means that there is leakage in the circuit at home, and the insulation strength of the wire is not enough, it is recommended that you find a professional to repair. Thank you.

It should be a leak or a fuse burned, ask the master to come to the door to see, if you don't understand, just don't move it.

If you don't know how to, you can find an electrician to check it out and see why it suddenly can't close the brake, and only by finding out the reason can you solve it.

Turn off all the electrical appliances in the house, then close the electric switch, and then turn on the electrical switches one by one.

It should be the safety button out, you see that there is a small blue or green raised button, just press it, if it still can't be closed, it is some shorts or light ash burned.

There is a leakage or short circuit.

This is where there is a leakage. If you don't understand, find an electrician to take a look...

Who do you find to fix the frequent tripping at home?

You can first ask the community property for help, or you can find a professional electrician to help with repairs. The reasons for the circuit tripping are as follows:1.

Insufficient voltage: Too many electrical appliances lead to insufficient voltage, and the power will be cut off at home. 2.

Short circuit: The circuit is not planned well when wiring, and a short circuit occurs, resulting in tripping. 3.

Leakage: If an appliance leaks, resulting in insufficient power supply, it will trip.

What do I need to pay attention to when installing a circuit?

1. Paste insulating fireproof tape.

After the wire is installed, simple protective measures should be taken on the surface, and fireproof tape should be pasted at the joint to prevent electric shock. Another way is to use a set of wires. This is a gadget for wiring that protects the wiring from leakage.

2.Independently connect different air switches.

The lighting and sockets at home must be connected to different sockets separately. When the socket is short-circuited, it will not affect the lighting circuit, and it is also easy to repair. If the lighting circuit is faulty, you can connect the lamp to the socket and check the problem in time.

3. The connection should be orderly.

When installing wires, be sure to grasp the order, and different wires should be marked differently to facilitate maintenance and inspection. In particular, high and low voltage lines should be marked, and the types of wires should be carefully distinguished during installation to prevent wiring errors.

4.Wires should be laid with sleeves.

It should also be noted that the laying of wires should have casings, otherwise it is easy to cause safety problems, and the joints cannot be exposed on the surface.

5.Install a leakage protection device.

Protectors must be installed in the home. In the event of a line failure, the power supply can be cut off in time to protect the safety of the home.

Summary: The above is about who often runs around the house for repairs. Hope it helps! Circuit tripping is a common problem at home and must be dealt with in a timely manner. It is best to find a professional master to help repair it. They are technically good and can solve circuit problems as quickly as possible.

If the electric switch at home trips and can't be pushed, you can find a property electrician to repair it.

The maintenance position of the property company is calculated according to the total construction area, such as 30,000 square meters. Or it can also be configured according to the number of households occupied, such as one for 300 households.

The property promises 24-hour service to the owner, on call, because the engineering maintenance personnel also have night shifts, and the night shift with less establishment is replaced by security guards, and many small property companies are looking for security guards when they have problems at night, because the salary of the maintenance worker generally exceeds the salary of the security guard.

Electric brakes

Electric switch refers to a relatively large power switch, leakage protection switch. Also known as gate knife. The operating principle of the leakage protection switch is:

On one core there is a main winding and a secondary winding: the main winding is divided into two windings, one of which is the input current winding and the other is the output current winding.

When there is no leakage, the input current and the output current are equal, and the vector sum of the two magnetic fluxes on the iron core is zero, and the electric potential will not be induced on the secondary winding, otherwise there will be an induced voltage formation on the secondary winding, which will be amplified to push the actuator and trip the switch.

There are two reasons for tripping: 1. Overload. If the power consumption is too large or there is a short circuit, the protection device of the electric switch trips.

2. There is leakage of electrical appliances or lines, or people touch electricity, and the current directly enters the ground without the zero line, and the electric switch senses the leakage and the protection device trips. In conclusion, tripping is to protect people and electrical appliances.