How to distinguish the brake lights and fog lights behind the car and what are their characteristics

Updated on Car 2024-04-05
14 answers
  1. Anonymous users2024-02-07

    Turn on the lights, and behind them are the running lights, which are called small lights. If you don't turn on the lights, it won't be on. The brake light only turns on when the brake is applied, and it has nothing to do with whether the headlights are turned on or not. Fog lights.

    All have independent switches, which are generally set together or symmetrically with the reversing lights.

    Car lights, all kinds of traffic lights installed on cars to ensure safe driving, are mainly divided into the following types:

    1. Headlamp.

    The main purpose of headlights is to illuminate the road and objects in front of the car to ensure driving safety. It can also be used as a night overtaking signal using alternating high and low beams. Headlamps are installed on both sides of the car's head, with 2 or 4 headlamps per car.

    The bulb power is 45 60W for high beams and 25 55W for low beams.

    2. Fog lamp: The fog lamp is installed near the headlamp or slightly lower than the headlamp. It is visible in fog, snow, heavy rain or dust.

    In low cases, it acts as a road light and provides a signal for oncoming traffic. The lights are mostly yellow, because the yellow light wave is longer and has good fog permeability. The bulb power is generally 35W.

    3. Reversing light: The reversing light is installed at the rear of the car to illuminate the road behind the car and inform the vehicle and pedestrians that the vehicle is reversing or preparing to reverse. It also functions as a light signaling device. The light is white and the power is 28W.

    4. License plate light: The license plate light is installed above the tail license plate of the car, and its purpose is to illuminate the rear license plate of the vehicle. The requirement is that the number on the license plate can be read 20 meters behind the car at night. The light is white and the power is generally 8 10W.

    5. Dome light: a lamp installed on the top of the cab or car for lighting in the cab. The ceiling light is white, the lampshade is mostly made of transparent plastic, and the bulb power is generally 5 8W.

    6. Instrument light: It is a tool for instrument lighting, which is often connected with the dashboard. The light is white, and the bulb power is generally 2 8W.

    7. Step lamp: It is used to illuminate the door step and facilitate passengers to get on and off the bus. The light is white, and the bulb power is generally 5 8W.

    8. Trunk light: It is the lamp in the trunk of the car. The light is white and the power is 5 8W.

    9. Tool lamp: It is used when repairing the car, and the work lamp socket is installed on the car, and the mobile lamp with the wire is equipped. The light is white, and the bulb power is generally 8 20W.

  2. Anonymous users2024-02-06

    No matter what kind of vehicle, the premise of turning on the fog lights is to turn on the lights of the vehicle, that is, to turn on the small lights of the vehicle first. Some vehicles turn on the front and rear fog lights by pressing the button, that is, there are buttons marked with fog lights near the dashboard, and after turning on the lights, press the front fog lights to light up the front fog lights; Press the rear fog lights to light up the fog lights behind the car. Some vehicles have fog lights installed on the light lever to turn on, which is turned on by rotation.

    When driving in harsh weather conditions such as fog, snow and heavy rain, or in a smoky environment, front fog lights must be used to illuminate the road ahead and ensure driving safety. In recent years, in terms of styling, fog lamps have been installed on the front bumper.

  3. Anonymous users2024-02-05

    The brake light is red for deceleration or parking, and the fog light is yellow for fogging.

  4. Anonymous users2024-02-04

    Reversing lights, fog lights, brake lights for cars:The reversing lights are all white. The reversing lights are installed at the rear of the car to illuminate the road behind the car and warn the vehicles and pedestrians behind the car that the car is reversing, and the reversing lights are all white.

    There is no independent switch for the reversing lights, which are all associated with the reverse gears and do not need to be operated separately.

    The rear fog lights are parallel。Fog lights are light signals used in foggy weather, fog lights are more penetrating in fog, the rear fog lamp sign and the front fog lamp are a little different, the front fog lamp sign light line is downward, the rear fog lamp is parallel. Due to the high brightness and strong penetration, the anti-fog lamp will not produce diffuse reflection due to fog, so the correct use can effectively prevent accidents.

    Brake lights, also called brake lights, are red lights. The brake light is the light that lights up when braking is on. There are three brake lights, which are the rear brake light and the side and high brake lights.

    Brake light utilization: The brake light is coherent with the brake pedal, when the driver presses the brake pedal, the brake light will be lit up, and the red light will be retracted, prompting the vehicle on the back to pay attention to and not rear-end. When the driver releases the brake pedal, the brake light goes off.

  5. Anonymous users2024-02-03

    In the headlights of the car, the fog lights are installed at a relatively low position. Fog lamps are installed at the front of the car slightly lower than the headlamps and are used to illuminate the road when driving in rainy and foggy weather. Due to poor visibility in foggy weather, the driver's perception of the answer line is limited.

    Lights can increase the running distance, especially the yellow anti-fog lamps have strong light penetration, which can improve the visibility of the driver and the surrounding traffic participants, so that oncoming vehicles and pedestrians can see each other from a distance.

    Car fog lamp featuresIn addition to the front high beam, low beam, headlights, small lights, rear running lights, brake lights, and a set of anti-fog lights in the inconspicuous place behind the car. Rear fog lights are red signal lights that are installed at the rear of the vehicle to make it easier for other road traffic participants behind the vehicle to be seen in an environment with low visibility, such as fog, rain or dust.

    It is installed at the front of the car slightly lower than the headlamp and is used to illuminate the road when driving in rainy and foggy weather. Because of the poor visibility in foggy days, the driver's vision is restricted. Lights can increase the running distance, especially Hussen yellow anti-fog lamps have strong light penetration, which can improve the visibility between the driver and the surrounding traffic participants, so that oncoming vehicles and pedestrians can find each other from a distance.

  6. Anonymous users2024-02-02

    Ten years ago, car fog lights were not standard, and now cars basically have fog lights as standard, and there are fog lights in the front and rear. The front fog lights of the car are generally white, the power of the bulb is basically the same as the low beam, and the front fog lights are generally two; The rear fog lights are generally red lights, and the power is basically the same as the front fog lights. In a car with only one rear fog light, the position of the fog lights is the same as the position of the steering wheel or left or right.

    Some off-road vehicles have yellow front fog lights.

  7. Anonymous users2024-02-01

    There is only one rear fog light.

    Drivers tend to react to symmetrical lights, and two rear fog lights are more exciting than one rear fog light.

    Get the attention of the driver in the rear!

    The rear fog lights and brake lights are very close together, and the two rear fog lights are easily confused with the brake lights, and the car behind you looks at it due to the fog on a foggy day.

    Unclear, when approaching your car, he will see two dazzling red lights, and his first reaction is that he thinks that the car in front is in an emergency.

    will also immediately brake sharply, which is likely to cause a series of rear-end accidents.

  8. Anonymous users2024-01-31

    Hello, it's easy to distinguish, you call a person to help you take a look, send the car, hang the reverse gear and light up is the reversing light, the reversing light is one for some cars, and some cars have two; Step on the brakes and turn on the brake lights; Turn on the fog light switch to turn on the rear fog light, generally there is only one rear fog light.

    The problem of the lights is concerned about the imperial lights, thank you.

  9. Anonymous users2024-01-30

    It is very good to distinguish that the fog light is a single contact bulb, the brake light is a double electric bulb, and the reversing light bowl is an electroplated reflective light bowl. Hope the answer helps!

  10. Anonymous users2024-01-29

    The reversing lights are white, the fog lights are yellow, and the brake lights are red.

  11. Anonymous users2024-01-28

    The reversing lights are white, the car lights are red, and the fog lights are brighter red than the brake lights.

  12. Anonymous users2024-01-27

    The way to distinguish between front and rear fog lights is very simple, and the patterns of front and rear fog lights are different. The pattern of the front fog lamp is that there are three downward diagonals on the left side of the bulb, and the pattern of the rear fog lamp is that there are three horizontal lines on the right side of the bulb. When the vehicle is driving in rainy and foggy weather, be sure to turn on the front and rear fog lights of the vehicle to remind other vehicles to pay attention to potential safety hazards.

    The following is the introduction of the front fog lamps and rear fog lights: 2 Lighting position In general, the light source of the pure front fog lamp is halogen or LED, the color is yellow, and it is installed near the ground of the front bumper of the car. The illumination angle of the front fog lamp of the car should not be too small, otherwise it will not be able to penetrate the dense fog, and the lighting angle should not be too large, otherwise it will affect the sight of the driver in front.

    3. Lighting color: The light source of the rear fog lamp of the car is generally halogen lamp, and the color is red. Depending on the model, the position of the rear taillights will vary. Some vehicles are installed near the ground of the rear safety land, and some are directly installed in the rear taillights.

    In terms of the number of fog lamps, there are generally two front fog lights and one rear fog lamp. Generally speaking, automobile fog lights are generally used in bad weather conditions such as dense fog or heavy rain to remind vehicles and pedestrians in front and behind to avoid, which improves driving safety to a certain extent.

  13. Anonymous users2024-01-26

    The logo of the car fog lamp is a bit like the word "Feng + buckle" and Hu. As for the front fog lamp, the word "Feng" is on the left, and the word "Feng" on the rear fog lamp is on the right. There are also some differences in color between the two. Generally, white and yellow are mainly used for front fog lights, and red is used for rear fog lights.

    This is mainly related to the function of both. As a front fog lamp, it is mainly for lighting, but also to let the car in front see itself and avoid traffic accidents such as rear-end collisions. As a rear fog lamp, the main function is to warn, so it adopts red.

    Of course, in some cases of low visibility, in addition to turning on the fog lights and driving at low speed, the owner can also pull over and turn on the hazard warning lights to avoid some unnecessary things from happening.

    Fog lights generally refer to car fog lights. Car fog lights are installed in the front and rear of the car to illuminate the road and issue safety warnings when driving in rain and fog. Improve visibility for drivers and surrounding traffic participants.

    The function of fog lights is to let other vehicles see the vehicle when the visibility is greatly affected by the weather in foggy or rainy days, so the light source of the fog lights needs to have strong penetration. Halogen fog lamps are generally used in vehicles, and LED fog shelter lights are more advanced than halogen fog lights.

    Millions of car purchase subsidies.

  14. Anonymous users2024-01-25

    The brake light only turns on when the brake is applied, and usually the brake light will be brighter and more dazzling, which can play a better warning role. Nowadays, family models will have high-level brake lights, and when you see a dazzling red light and a high-level red light behind the car, it means that the front car is braking.

Related questions
6 answers2024-04-05

Variable Valve Timing (VVT) is a technology used in automotive piston engines. VVT technology adjusts the overlap time and timing (some or all of it) in the engine's intake and exhaust systems, reducing fuel consumption and increasing efficiency. >>>More

11 answers2024-04-05

The method of replacing the brake fluid is: 1. Turn off the vehicle, open the engine compartment cover, use a syringe to pump out the oil in the oil storage tank, and pump it to the bottom of the tank; 2. Fill the oil pot with new brake fluid; 3. Use a jack to jack up the vehicle, starting from the rear wheel, and remove the tire; 4. Find the oil drain screw of the brake cylinder and remove the rubber dust cap on it; 5. Use a wrench to loosen the oil drain screw, put the rubber tube on it, and connect the other end to the oil drain bottle; 6. Go to the car and start to step on the brakes, if you find that the rubber pipe is discharged from the shallow new oil, the oil change of this wheel has been completed, stop stepping on the brakes, install the tires, and repeat the operation for the next three tires; 7. After all four wheels are discharged, observe whether the oil volume of the oil storage tank in the engine compartment has reached the lower limit, and if it reaches the end, new brake oil can be added appropriately.

21 answers2024-04-05

When braking is uneven due to uneven braking force and causes a malfunction such as deflection or tail flicking, depending on the model, it is possible >>>More

9 answers2024-04-05

The front wheel offset brake is mainly due to the inconsistent pressure of the two oil chambers of the main cylinder or the piston and axle pin of the sub-pump. Rear wheel deflection is a frequent occurrence. Vehicles with ABS generally do not exhibit deflection braking. >>>More

20 answers2024-04-05

Analysis: Hello, arthritis is generally related to cold or poor resistance, or frequent cold water, etc. >>>More